screw it France

... ranging from 0.4 to 6 tons. Finally, it features a screw pin that allows for quick connection and disconnection multiple times without delay. This shackle is therefore ideal for all lifting operations that require frequent assembly and disassembly. If you are concerned that the pin may unscrew without your notice due to vibrations, impacts, or friction with a sling, for example, or even the ground, it is advisable to opt for a GREEN PIN G-4163 bolt-type bow shackle with a locking pin. SWL: 0.4 T, 0.6 T, 0.9 T, 1.5 T...

...The VS100 screw module, developed by CDA, is a semi-automatic and independent device designed for screwing caps onto a variety of products. Equipped with an integrated screwdriver, the VS100 can efficiently secure caps onto containers. It is easy to handle, features two-hand control, and allows for adjusting the screwing time directly on the screwdriver head. This semi-automatic tabletop...

... is done on the transmission screw, either at the bearing (position B1) or at the end of the table (position B2). The output shaft is threaded to screw in the knurled knob with or without position indicator (or the handwheel, but it cannot be used with an indicator). The maximum achievable stroke is 100 mm, and any intermediate non-standard stroke can be realized. A "Z-axis" version allows the table to be fixed only by its end plate. Model: 309A0 Screw Ø x pitch: M6 x 1 Guiding column Ø: Ø8 Strokes: 0 – 100 mm Maximum load capacity: 1 kg...

... liquids and gases, including steam (saturated or superheated). It has demonstrated excellent reliability in commercial transactions. Diameter: DN25 to DN300 Pressure: 16 bars by default, other pressures available upon request Power supply: 12VDC, 24VDC Output signal: 4 – 20 mA, pulse, Modbus RS485 Electrical connection: M20*1.5 cable gland Protection: IP65...

...Equip your facilities with this stainless steel 316 threaded sleeve. A stainless steel sleeve allows for a connection between pipes in a fluid distribution network. It is perfectly suited for networks that are frequently disassembled. Available diameters: from DN6 to DN100 Threading: Gas or NPT Standards: CE 1935/2004 Nominal pressure of the threaded sleeve: 50 bar Standard: ISO 228-1 (except NPT)...

...The stainless steel PAL nuts are used in situations where the tightening force is low to moderate. The stainless steel PAL nut DIN 7967 screws on like a regular nut onto a metric thread. The locking occurs through the pressure exerted by the PAL nut on the thread, making it non-loosening.

...Inherited from traditional screw machining, the cam multi-spindle lathe allows for very high productivity, thanks to the simultaneous machining of multiple parts. It is therefore particularly suited for large series, such as those found in the automotive industry, for example. Our machining capacity ranges from Diameter 5 to 32mm. Material: low-alloy steel, brass, aluminum...

... and screw it onto the essential oil bottle in place of the lid. Make sure the diffuser is screwed on tightly, without forcing the bottle. Turn it back and gently shake the entire unit (to initiate the flow of essential oils into the diffusion device). Replace the cap. Place the device in its charging base. Using the USB cable, connect the base to a USB port or to a wall outlet with the provided power adapter. The device is ready to operate and is charging, so it can later function on battery and be removed from its charging base.

... spotlights installed in series with a single button. Technical specifications: Diameter: 68 mm Length of the screw thread: 50 mm Height of the screw thread: 50 mm 7 colors - different scrolling modes Power of the spotlight: 1 W Reference: ledkit01boitier Diameter: 68 mm Length of the screw thread: 50 mm Height of the screw thread: 50 mm Power of the spotlight: 1 W...

... equipped with 5 channels, supporting a maximum load of 3 A per channel (total current: 15 A). The controller has a power rating of 36 W/72 W (180 – 360 W total power). Made of plastic, it has an IP20 protection rating, making it suitable for all surrounding environments where you want to manage an LED strip with extreme versatility remotely. It features screw clamps for wire connections and brackets for mounting. SKU: CLMF5 WEIGHT: 0.2 kg...

...The hexagon socket countersunk screw in stainless steel is ideal for directly fastening components to metals in fastening and screwing tasks. It is made of stainless steel and has good corrosion resistance. Material: Stainless Steel A2 Diameters: M2.5 to M20 Available lengths: from 5 mm to 130 mm Standards: ISO 10642 (similar to DIN 7991) Head shape: Countersunk Drive shape: Hexagon socket Thread type: Metric...

...Bottle with a capacity of 550 ml. Made from stylish and durable recycled aluminum. Featuring a satin finish, it includes an original screw cap with a bamboo detail and is BPA-free. Made with distinctive recycled aluminum. Presented in a designer kraft box and in an individual recycled bag. Recycled aluminum is a material with almost infinite recycling possibilities, without losing its original properties and consuming less energy in the process. 550 ml Recycled Aluminum / Bamboo Ref: 20207...

...EBL offers you a complete range of products for horizontal support, without nails or screws. The Kala wedges optimize your storage and transport of coils. I leave it to you to either insert the appropriate keywords or submit them to me, and then I will discuss with my client their preferences.

...Washing kit with a chrome steel handle and a skirt mop. French screw socket. Washing kit with a chrome steel handle and a skirt mop. French screw socket. The skirt mop gets into every corner, is highly absorbent, leaves no streaks, prevents hand wetting, and does not fray. To be used with a bucket + single or double wringer. Handle: chrome steel MOP: predominantly cotton Color: white and blue fringe Length: 1400...

... fixed anchoring in the substrate. Thread D1 according to ISO 6H. In certain materials, the cutting slot threaded inserts slightly tighten inward in the area of the cutting slot, resulting in a certain locking effect of the screw. If this effect is not desired, it is recommended to use the threaded inserts with cutting holes. Reference: 07652 Material: Steel or Stainless Steel 1.4305...

...-one revolution: it has 2 lugs that adapt perfectly to any size of joist (up to 74 mm) in wood, aluminum or composite. In addition, thanks to the red clamping screw, the head becomes self-leveling or remains fixed. EAN:7421031903338...

...Household screw press with tilting stirrup. The frame of this press is free. It is a stainless steel cylinder perforated with small holes of 5.5 mm in diameter, placed under the pressing plate. The tilting stirrup system allows for complete removal of the frame, making it easy to empty the pomace and quickly reload the frame. Dimensions: 45x45x70 cm. Pressing plate made of ash. REF: PRIMULTI WARRANTY: 24 MONTHS Capacity (l.): 7.5 Other dimensions: The frame is perforated with holes of 6 mm in diameter Net Weight: 10 kg...

...Protects against animal intrusion while maintaining insulation and ensuring ventilation. Slides under the under-tile plate, it will be secured by the screw anchor, without the weight of the plate resting on it. Designed for roofs made with under-tile plates from the brands ETERNIT (soutuile 230 FR natura and maxisoutuile) and EDILFIBRO (Tegolit PKF 235). Material: Polyvinyl chloride strip Length: 900mm...

...To equip the wood/bristle broom and the wood/fiber deck washer, it can also be used for other standard socket brooms. Standard screw-in socket. Length: 1.30 m. Handle: DO153 To be used with brooms: DO151, DO152, DO154...

... Galva Z275 Protection. Resistance of 190 hours in salt fog. ADMISSIBLE SUPPORTS Possibility to screw into wood. TECHNICAL SPECIFICATIONS • Compatible with furring strips F45 and F47 • Possibility to screw into wood using 3.5*35mm screws • Thread: M6 • Maximum load per piece: 40 Kg = 40 daN PACKAGING Box of 20 crosses.

... series. The plastic material (e.g., PP, PE, ABS...) is presented in the form of pellets in the hopper. It is heated inside the barrel and then mixed by a screw: this is the plasticization step. Following this operation, the viscous material is pushed into the mold by a piston: this is the injection. For the material to solidify, it is necessary to thermoregulate the mold. The molded part can then be ejected after the mold is opened using an ejection system.

... entertaining baby in the playpen or soothing them at bedtime. Integrate it into the sleep routine for a gentle transition to the land of dinosaurs. Attaching it to the crib is simple: Screw the two wooden parts together on either side of the support. The mobile from our "Diplododo" collection is an unforgettable gift for newborns, nurturing the dreams and awakening of little ones. Reference: 845 5005...

...A screw is a mechanical component designed to fasten one or more pieces by pressure. It creates a removable planar connection through preloaded contact between the parts to be assembled. Screws consist of: - a head: For assembly screws, it is the underside of the head that exerts the clamping pressure. The shape of the heads is defined by the drive interface and the type of installation: The...

...Presentation Oil-injected screw compressor for biogas and process gas The AERZEN screw compressor units are characterized by a wide variety of types and numerous modification possibilities. Whether these compressors are used in the design of a client's plant or as a complete solution, AERZEN always adapts to the individual needs of the customer. It is the development expertise of this market...

... protection, management, and analysis of a pump's operation. In case of malfunction, it alerts and/or stops the pump. It can be adapted to any type of pump, whether centrifugal, turbine, vane, eccentric disc, eccentric screw, lobe, gear, submerged rotor, magnetic drive, mechanical seal, etc. Pumps are exposed to foreseeable risks that can be eliminated, particularly due to non-compliance with the flow/pressure operating range specified by the manufacturer.

... is equipped with a robust screw mechanism, ensuring smooth and secure lifting and lowering of vehicles. This screw lift is particularly valued for its mechanical reliability, reducing the risk of breakdowns and minimizing maintenance needs. Thanks to its screw lifting system, it does not use cables, chains, or other components that may wear out quickly, making it an ideal choice for professionals...

...This eye bolt (Eye screw with nut and washer) can be used for securing a cable tensioner. Its 40mm thread allows it to pass through a square post with a maximum size of 35mm. The eye has an inner diameter of 12mm, and its collar will press against the support. The 40mm measurement is taken from under the collar. Reference: 9004.0640.6000 Type of screw: Metals Dimensions: M6 x 40 mm...

...The glass candle holder with a brown screw cap is both elegant and functional. Made from high-quality glass, it offers a beautiful transparency that allows the warm glow of the candle to shine through, creating a warm and soothing atmosphere in any room.

...Neodymium magnet in a steel casing, equipped with a threaded rod into which you can insert a screw of the same size. The magnet is made of neodymium, an alloy of iron/boron/rare earths that currently offers the maximum magnetic power. It is wrapped in a layer of nickel-chrome (an alloy of chrome and nickel) that protects it against corrosion and gives it a more aesthetic finish. REFERENCE: AIRGT10 Thickness: 12 Length: 20 Width: 20...

...the perfectly closed position is clearly identifiable visually, in addition to the two levels of safety, thus preventing accidental opening under pressure. Additionally, the vent screw prevents any opening under pressure due to carelessness or inattention.