gas control systems France

...Female / female GAS BSP 3/4” PN25 Electric actuator 1/4 turn 24 VAC or 230 VAC PVC cover 125 x 80 mm Total height of the assembly 140 mm Reference: DVR3424...

...Eco-designed, ultra-compact, smart & connected continuous gas analyzer, for emission or process gas monitoring. Perfectly suited to control SO2 removal efficiency in processes using Flue-gas desulfurization FGD / DeSOx systems. Measurement range:0-100 / 0-1000 mg/m3 user programmable; 0-35 / 0-1500 ppm user programmable Minimum detectable limit (2σ):0.2 ppm Noise (σ):0.1 ppm Response time (0-90 %):5 – 40 sec (programmable) Zero drift:< 1 ppm / 7 days Span drift:< 1% / 7 days Linearity:± 1 %...

...Multipoint Temperature Sensor TC and Modular Straight RTD with Primary Protector The iTHERM TMS12 MultiSens Linear Multipoint temperature sensor for oil and gas and chemical applications can be customized for different scenarios in accordance with the highest safety standards. It enhances process safety by creating detailed linear temperature profiles and features a diagnostic chamber to contain...

...Optional combustion probe with a flexible rod length of 220mm and a hose length of 2 meters. Compatible with the analyzers: KANE251, KANE255, KANE450, KANE453, KANE455, KANE501, KANE504. Allows for combustion analysis in areas where it is difficult to insert a standard rigid probe, such as in flue gas ducts.

...The MX 256 is a digital control unit intended for the detection and measurement of gases present in the atmosphere and more generally for the processing of any digital signal from digital sensors (OLCT 10N types), relay module, analog output module, logic input module. Thanks to its new option, an industrial controller module or remote HMI, it is possible to add analog input modules for sensor...

... distribution of all types of fuel. One ORDIPUMP is required for each type of fuel. The identification of fleet vehicles and related authorizations are automated and managed by the WINCARB software. Multiple ORDIPUMPs can be networked on a site or in the case of large vehicle fleets. ORDIPUMP is adaptable to all non-automated fuel distribution methods or in the case of renovations of older systems or to replace manual pumps.

...The Echoview Mini-Controller is the coordination hub for RAE SYSTEMS' closed-loop wireless solutions for the range of portable gas detectors. It is designed to be robust and resistant to shocks and alterations it may encounter in hazardous environments. It allows for the establishment of a standalone wireless network between up to 8 portable detectors (maximum achievable). It also supports their readings as well as the status of alarms in real-time. This device provides security professionals with instant access to crucial information, enabling them to secure sites quickly and effectively.

... drastically reduce these times without compromising the quality of the concrete. To achieve this, CSI has provided industries with effective and reliable temperature control and drying systems that allow for precise drying control, thereby ensuring safety for strategic technical cements such as load-bearing architectural structures or railway sleepers.

...{"Connections":"Long wires 1000 mm","Usage":"Designed for the equipment of enclosures, connection cabinets, control, electromechanical control systems… These heaters prevent: condensation, mold formation, and oxidation.","Installation":"Possibility of a mounting kit with bi-rail adapter, DIN omega, and asymmetric DIN.","Sections":"Air and Gas Heating, Thermostats, Heating for Cabinets","Power...

... maintenance is scheduled in consultation with the client, who naturally reviews their workload before setting a date. The various control devices necessary for paint booth maintenance undergo an annual revision and come with a calibration certificate. All technicians working on paint booths and tunnels have received technical training from certified centers on the operation of propane, natural gas, and fuel oil burners, as well as...

... delivers your pre-equipped shelter with: - Electrical installation: cabinet, cable tray, sockets (possibility of secure cable passage with Roxtec) - Telecom and IT pre-wiring (possibility of technical flooring) - Lighting - Heating, air conditioning, ventilation (possibility of gas extinguishing) - Furniture - Optional sanitary area - Optional alarm, video, access control, door automation system...

...Functions: the ability to see without being heard, volume, contrast, brightness, and ringtone are adjustable. 9 electrical wires + 1 wire per ringtone button + 1 coaxial cable between the outdoor unit and the monitor are sufficient for communication and controlling the door opening. Allows for the control of an electric strike (ref. GAS or ref. GAE1) without additional wiring. Maximum distance between the outdoor unit and the monitor: 25 to 50 meters with coaxial cable (ref. STAR8) + 4x1.5mm2 electrical cable (ref. 4X15 and ref. W10XS). Wall mounting. REF:MOPVE Dimensions:215x228x75mm...

... vacuum chambers. Mass range options: 50, 100, 200, 300, or 510 amu: Control of MASsoft via RS232, USB, or multiple systems via Ethernet LAN Detector options offer sensitivity ranging from high vacuum to ultra-high vacuum, UHV: Quick access to histogram, trend analysis, and display of analog peaks Stability (less than ±0.5% variation in height over 24 hours): Scanning in mixed mode, e.g., trend analysis, histogram, and analog peaks...

...* 4,600 x 2,350 x h. 2,100 mm. * High-pressure pump group. * Electromechanical mixing system. * Electrical panel and PLC control on each track. * Chemical dosing pumps (shampoo and wax). * Incoming water filtration system. * Water softening system based on resins, equipped with a salt tank. * Osmosis system. * Electric / diesel / gas thermal group. * Autoclave for osmosis water. * Storage tank for osmosis water. * Anti-freeze kit (internal insulation and heating). * Electrical installation of the technical room. * Twilight control.

... installation and connection to the pneumatic valve. - Pneumatic inlet valve for the tank controlled by the high and low levels of the tank. - Electro-pneumatic management box with functions: • On – Off (pump or heat source control) • Production or cleaning Option: Level regulation via frequency inverter with front potentiometer. Controlled pump powers: 1.5, 2.2, or 4 KW. Semi-automatic or automatic systems allowing continuous liquid management between, depending on the case, a filtration pallet or a pasteurizer and the filling machine. Equipment complies with the Machinery Directive 97/23/EC.

...Wiring for Fire Safety Systems (SSI) in ERP and IGH. This CR1 C1 cable is used for telephone, telemonitoring, and remote control connections. Fire detection and sound alarm. Hot environments. Fire-resistant cables CR1-C1-SH are mandatory for powering safety installations. The use of halogen-free cables with low smoke and toxic gas emissions in case of fire is recommended to facilitate the...

... 500 to 1050°C depending on the model. The MicroPoas® signals are collected by one of our electronic systems (ATS2020 or Oxybox’Air) which will display and/or send a 4-20mA output signal proportional to the measured oxygen concentration. EXAMPLES OF APPLICATIONS Heat treatment Control of combustion Waste incineration Crematorium...

L.LAIR, the leading French manufacturer of air jet burners, specializes in industrial gas burners, gas assemblies, gas regulation and safety, flame control, and equipment for air heating in industry. From automotive to aerospace, from food processing to waste treatment, L.LAIR meets all the needs of industrial clients using gas-powered air heating systems in France and abroad: from design to...

FLAMTECH specializes in industrial combustion. We offer manufacturers standard or custom thermal equipment for various combustion processes, at low, medium, or high temperatures in the fields of ceramics, metallurgy, glassmaking, food processing, etc. From the supply of innovative components to the study of combustion systems. In our product range, you will find: burners, flame control systems, gas regulation systems, pressure switches and leak detection, high voltage ignition, gas detectors, and manometers. Additionally, we provide the associated tooling.

OVENTROP ROBINETTERIE is one of the leading European manufacturers of fittings, control devices, and systems for buildings. We position ourselves as a competent partner for wholesalers, companies, engineering offices, and industries.

Witt France has been specializing for over 65 years in the design and manufacture of gas control and safety equipment. Our wide range of products includes gas mixers (N2, O2, CO2, Ar, He, and H2), gas analyzers (O2, CO2, CO, He, CH4, He…), leak detection systems, flame arresters, as well as check valves and pressure regulators, among others. Our products are fully adaptable to various sectors...

HTDS is a company specialized in the distribution and maintenance of high-tech detection systems in France and internationally. Security: security control machines intended for airports, prisons, and public buildings. Food, pharmaceutical, and cosmetic: Supply and maintenance of quality control machines. Optoelectronic Components: Optical components intended for the industry. Scientific...

2M Process studies and offers installations for the implementation and purification of gaseous fluids. Specializing in the field of catalysts and adsorbents, at very low or very high temperatures, 2M Process provides you with systems based on the transformation and absorption of undesirable molecules through precise control of thermodynamic conditions. Furthermore, our experience allows us to offer you tailored systems for gas mixing, distribution, sampling, analysis, vaporization, and more.

... instruments and measurement systems for temperature, pressure, humidity, gas analysis, vibration, and flow for applications in Oil & Gas, the environment, pharmaceuticals, chemistry, petrochemicals, and utilizing technologies such as infrared detection, ultrasound, electrochemistry... RESPUR International helps you control, protect, calibrate, and validate your critical processes and applications...

Specializing in dry air techniques and their industrial applications for drying and dehumidification, DESSICA develops innovative solutions tailored to the dry air needs of manufacturing processes for humidity control in facilities, the dry air storage of hygroscopic products, or to prevent condensation or corrosion of metals. DESSICA systems eliminate issues of clogging and bulk handling in...

... Colman…) - On-site interventions (in France and internationally) - Engineering and modernization office - After-sales service - Training at our facilities and on-site - Audit and consulting on control/command systems for engines and turbines.

The company AIRMOTEC AG SA is based in Saint-Antoine. It is part of the Chromatotec Group. For 40 years, Chromatotec®, a collaboration of the expertise of three companies—Chromato-Sud, Airmotec, and Medor—has specialized in the development, manufacturing, and sale of gas analyzers that are entirely designed and produced in France. Also present in China and the USA, the group has been historically...

...ADMI is a recognized specialist in the field of measurement and control instruments for:- Pressure / differential pressure.- Air velocity.- Gas and water flow.- Humidity / Temperature.- Levels.- Environmental quality (light, gas concentration, etc.). We operate particularly in the following areas:- HVAC / climate engineering (heating, ventilation, air conditioning), - Air treatment, - Building automation systems, - Industry (pharmaceutical, oil, naval, wastewater treatment, etc.), - Research (laboratories, CEA...).

...YOKOGAWA's core business encompasses control and safety systems, information systems, support activities for industries, and industrial instrumentation including flow, pressure, and temperature measurement, data recording and acquisition, physicochemical analysis, and analytical systems. YOKOGAWA consists of 86 companies spread across 56 countries. YOKOGAWA is a giant in innovation and cutting...

... to supermarkets, hypermarkets, electronics or appliance stores, fashion boutiques, optical shops, luxury boutiques, perfumeries, pharmacies, as well as bank branches, gas stations, tourist offices, hotels, logistics warehouses, etc. Our sales and technical teams operate throughout metropolitan France, Corsica, overseas departments and territories (DOM-TOM), the Benelux, and Poland.