technical screws France

... tolerance: for the threads listed below, the average tolerance class applies, namely 6H for the threads and 6g for the threadings. Other dimensions: ± 0.25 mm. With reinforced threaded inserts, we offer a version with a high section that allows its use for applications with high loads. Technical information, see the manual for threaded inserts. Reference: 07661 Material: Steel or Stainless Steel Finish: Passivated...

...The easily maneuverable transport carts from Sofame adapt effortlessly to various work environments and situations. SV Trolleys: Technical Specifications 2 side walls made of 2 mm thick, curved steel sheet. Frame made of 2 mm thick, curved steel sheet consisting of a lower base and an upper shelf. Surface coating with epoxy powder, cured in an oven at 180°C. Assembly with screws on threaded...

... Galva Z275 Protection. Resistance of 190 hours in salt fog. ADMISSIBLE SUPPORTS Possibility to screw into wood. TECHNICAL SPECIFICATIONS • Compatible with furring strips F45 and F47 • Possibility to screw into wood using 3.5*35mm screws • Thread: M6 • Maximum load per piece: 40 Kg = 40 daN PACKAGING Box of 20 crosses.

... drive interface is the part of the screw that receives the tool necessary for tightening and loosening. This drive can be external (hexagonal H, ...) or internal by impression (6 recesses, slot, cross, 6 internal lobes "Torx", ...). The type of installation takes into account accessibility (tight spaces or not, ...) and visibility of the clamping (decorative, discreet, ...) as well as technical characteristics such as the tightening torque. Thus, the head can be: - hexagonal H (NF E 25-112, NF E 27-133, NF E 27-140, ISO 4014, ISO 4015, ISO 4016...

...Flat magnet with screw housing MATERIAL - Body made of zinc-coated steel. - Magnet made of hard ferrite, samarium-cobalt (SmCo), or neodymium-iron-boron (NdFeB). USAGE - Maximum operating temperature: 200°C for ferrite, 280°C for samarium-cobalt, and 80°C for neodymium-iron-boron. - To avoid damaging the magnetic properties, the fixing screws must be made of a non-magnetic material. See technical specifications.

...TECHNICAL SPECIFICATIONS - Cylindrical vertical tank on legs: C26. C27 - Brand: Pierre Guerin - Tank with flat bottom on legs - Capacity: 90 HL - Material: 304 L - Year: 1998 - Interior finish: raw cold-rolled. - Exterior finish: brushed Roof - Decentralized chimney - Flap Ø 300 with arm clamp Bottom - When fully drained, stainless steel ball valve Ø 50. - Legs with adjustment screws and plates...

...USAGE: Wrench keys for lag screws and bolts compatible with lag screw machines. ADVANTAGES: High-quality technical tools made of nickel-chrome cemented steel, tempered. Sockets for classic lag screw machines and bolt machines (square drive 23 mm). 4-sided fixation for square-headed lag screws (mm) and 8-sided for rectangular lag screws. Mixed wrench Ø 23 Hex 38 18 20 23 27 35 39 41 Ø 20 Ø 23 18...

... shafts - screws and nuts (trapezoidal, ball) 5 Archimedes screws 6 LINEAR DEVICES Telescopic slides - lifting elements - "UHING" devices 6 hydraulic dampers 7 COUPLINGS FOR INDUSTRY AND MARINE Rigid - elastic - with teeth - elastic or rigid torsion shafts 7 8 INTERMEDIATE COUPLING DEVICES Universal joints - profiled shafts and sleeves - flexible shafts - torque limiters 8 centrifugal clutches 9 ELASTIC ELEMENTS Spring elements - oscillating - dampers ...

... hood and special conical bottom are manufactured in department 26. This professional sandblaster has no bolts, screws, or threaded rods everywhere! It is a construction-grade steel equipment with a thickness of 4mm! No need for a plastic funnel. You will find their price in the last line! The sandblaster, fully manufactured in our workshop with all high-end welds and technical aspects, called AMXT 15 ONE or AMXT 15 PRO, can also be available in a hydroblasting version or in skid version with a very competitive pricing offer!

...N/A Magnification Range (zoom level): N/A Resolution (technical): N/A Search Engine Resolution: N/A Customs Code SH: 90118000 Measurement and Calibration: N/A Flexible LED Control (FLC): N/A Automatic Magnification Reading (AMR): N/A Extended Depth of Field (EDOF): N/A Enhanced Dynamic Range (EDR): N/A Depth Acquisition (DPQ): N/A Coaxial Lighting (AXI): N/A Polarization: N/A LEDs (type and number...

...Economical storage cabinet with 2 powder-coated steel doors. Equipped with 4 shelves and doors with a 3-point locking mechanism. Delivered unassembled. Assembly is done without screws or tools. Also, discover our complete range of cabinets and lockers on our online site! Technical specifications: Height (mm): 1800 Width (mm): 900 Depth (mm): 400 Weight (kg): 41.5 Load per shelf (kg): 70...

...SLEEPER SCREWS DEFINITION OF THE PROFILE IN ACCORDANCE WITH THE TECHNICAL SPECIFICATIONS OF NF F50 - 006 • designated by the diameter D and length apart from the head L, expressed in mm. • used for fastening to a wooden sleeper: • either in direct laying, by tightening on the rail foot, • or through the intermediary of chairs or clips. DIRECT LAYING It is advisable to use 3 sleeper bolts per rail, making 6 per sleeper, positioned in alternating triangles. • It is possible to use them on concrete with a matching threaded fitting or polypropylene plug. Protection Plain or galvanised...

... machining centers (using ball screws on all axes, high-performance AC Brushless servomotors controlled by numerical control), allows for the production of high-precision parts. Equipped with high-pressure pumps and THP components from the world leader KMT Waterjet, the QUICKJET II is optimized for all precision industrial cutting applications, from pure water cutting of soft materials (rubber, plastic, cardboard, fabrics, leather, paper, foam...) or, with the addition of abrasive, for cutting...

... anchoring – Galvanized steel upright, thermolacquered round steel tube 194/3mm – Galvanized steel connection parts, thermolacquered – Semi-oval gutter beam of 150×150/2mm in thermolacquered galvanized steel – Oval roof tube in thermolacquered galvanized steel 60×80/2mm – Galvanized steel screws Our MaxLégère and MaxLourde pagoda tents comply with all current standards and can be certified by BVCTS...

...Heavy-duty turnbuckle. It is suitable for securing tarpaulins exposed to high winds and in saline environments. Technical specifications: - Material: Stainless steel - Overall length: 73 mm - Overall width M = 16 mm - Width M1 = 18 mm - Overall height: 47 mm - Hole spacing: 51 mm - Fixing: by screws or pop rivets...

... coating that is cured in an oven at 180°C. The design is such that the assembly of the metal elements does not leave any visible screws or bolts, ensuring better protection for the user against injuries. The tubes of the legs or frames are equipped with plastic caps to prevent floor puncturing. Technical documentation "Download Tab" Reference: 010030001SOF Condition: new Warranty: 2 years...

...- Ooni gas burner - 2 screws (10 mm) - Allen key - Extendable match holder - User manual - Gas regulator for propane bottle and flexible hose Technical specifications for Ooni Karu 12 gas burner: – Dual venturi gas burner with caps for better flame performance – The Ooni Karu 12 gas burner heats the oven to 450°C in 25 minutes – Low power valve added for cooking at lower temperatures Weight: 2.5 kg...

... playgrounds. The design of the OSMOZ® modular system is the result of more than 10 years of commitment to the development of children's play equipment. Posts: made of stainless steel 50x50mm with 2mm wall thickness HPL panels: outdoor quality, 13mm wall thickness, anti-UV and anti-graffiti treatment. Brown base plates made of 15 Fasteners: stainless steel screws (uniform with 10 mm diameter), theft-proof...

... mechanical harvest) • No moving mechanical parts (no screws, no belts...) • No crushing of the harvest • Ensured safety and simplified cleaning • Reduced maintenance and mechanical upkeep Technical specifications: Capacity of 30hl - 40hl - 50hl - 60hl - 80hl - 100hl - 125hl - 150hl Variable flow rate of 2 to 100 t/h depending on the models.

... - Overall height: 8 mm - Inner dimensions 22 x 14 mm Installation: The eyelets are split and can be set using a hammer. However, an installation tool is available in our online store. Fixing with screws or pop rivets available in our online store.

... strong presence in over 13 European countries. We provide a varied range of solutions for the construction, industry, medical, nuclear, and agriculture sectors across Europe. We specialize in STHC screws (Hexagon Socket Head Cap Screws) from M3 to M24, in Steel (22H - 33H - 45H) - Stainless Steel (A1 - A2 - A4) - Brass and Aluminum. STHC screws with flat ends, slotted flat, conical, nipple, cup...

Specialized in CAD and drafting, our teams of industrial designers cater to all your industrial 3D design needs. We offer: - The design and drafting of all types of products, from 3D modeling of systems and mechanisms to the creation of technical drawings. - The conversion of your paper archive drawings into digital documents. - The use of 3D modeling allows you to test all the parts you wish...

...fireproof seals, etc. Find the essential equipment and spare parts to ensure the maintenance of safety devices and emergency lighting. Do you have a damaged or torn fireproof seal that needs replacing? Fire door seals are either intumescent seals mounted with an adhesive on the seal or black rubber seals fixed with flat bars and/or screws. In any case, their replacement is easy. BLI offers rubber or intumescent seals for fire doors from various brands, available with no minimum quantity.

Since 1990, GIROTEC has been developing its range of screws and bolts, and in response to growing demand, it has adapted and expanded into tools and industrial supplies. Even today, your interest is our priority, and we dedicate our energy to meeting each of your needs. Our sales team has the experience and expertise to address all your technical or commercial questions and is at your disposal to successfully carry out your projects.

SMEP Industries is a precision engineering company specializing in the manufacture of high-performance mechanical parts. SMEP Industries produces according to plans, specifications, or technical documents: all mechanical parts and fasteners, screws, bolts, turning, wear and safety parts, sub-assemblies, or mechanical assemblies. SMEP Industries has three specializations: rolled threading and the...

... the DIY market and for building professionals for many years. Our specialty: Wire Drawing (screws, nails, bolts, hooks, hinges, washers…) and Furniture Hardware (hinges, pivot hinges, brackets…). Our core business: Designing products and product ranges for our distributor clients (DIY stores and professional trades) and their end customers, including DIY enthusiasts, craftsmen, and construction companies.

... series. Our parts are intended for all types of industries (railway, electrical applications, and various mechanical uses). Heat treatments and surface treatments can be added to the manufacturing range to meet each need/specification. Equipped with a significant machine park, the factory located in northern France can quickly respond to your requests for technical feasibility and then offer you rapid production, starting from small series. FATUS (Manufacturer of Standard and Special Wire Articles), your partner in fastening parts for the industry.

The company SPB - HARDWARE AND FASTENING specializes in the trade of fasteners and fixings: metal screws, rods and threaded ends, washers, wedge spacers, lock nuts, nuts, spacers, inserts, crimp nuts, wood screws, particle board, sheet metal, plastic, elastic rings, pins, rivets, clamps, keys, dowels, maneuvering elements, and screw fittings. It primarily operates in the fields of industry, from nuclear to metallurgy, including chemistry and petrochemistry. Over 450 new references are stocked each year, and our inventory has tripled since 2001.

For 60 years, the companies of the THOUMYRE group have consistently emphasized strong technical expertise and professionalism, fostering the establishment of lasting relationships based on the performance of people and products. We distribute ALL BRANDS AND ALL TYPES of locks, keys, cylinders, bolts, padlocks, and all opening, closing, and security systems at the best prices for: Buildings - Industry - Communities - Furniture.

... contracts. By using our purchasing center service, you save on logistics management costs while allowing you to manage your supplier panel. - SOURCING: With a database of over 5000 suppliers worldwide, we can cover nearly 99% of your needs, whether it involves searching for stock, obsolete products, or under-allocations, as well as providing technical assistance to choose your cross-references. Feel free to contact us for more information!