fixed conveyors

... sizes 8 and 10. Mounting Type A Insert the lower part of the body with the rollers into the groove of the aluminum profile. Place the upper part of the body with the expansion bolts and press down. The expansion bolts and clamping elements allow the rolling element to be fixed in the groove and held securely. Mounting Type B Insert the lower part of the body with the rollers into the groove of the aluminum profile. Place the upper part of the body and press down. Tap or screw to fix and tighten the rolling element in the groove. Reference: 10450...

... gravity curves for the handling of packages with a flat supporting surface and light loads. The wheels can be individually assembled, fixed on flatbeds by means of suitable brackets, in correspondence with exchanges between curves and tracks with idlers, in conjunction between tracks with ortogonal motor-driven rollers or with the function of guide-abutment of packages.

... and built to last and consistent in operations such that it can work around the clock if need be. Where aggregates bins, conveyors, cement silos, a mixing unit, and a control system are important components of the plant, other equally essential elements represent the plant's technology level, which enables it to perform quality and accurate batching. The stationary plant does not provide easy mobility, as is the case with the mobile one.

... pumps and motors - Bosch Rexroth drive pump - Danfoss hydraulic system - BOSCH-REXROTH / DANFOSS discharge conveyors (two parts) - Width ~ 1,400 mm, discharge height ~ 5,300 mm, hydraulic controls Hopper - Main and tipping hopper, Categories: Crushers Model: DK95 Year: 2023 Brand: OLNOVA Condition: New Engine Type: Diesel...

...Options include custom-sized conveyors, traction motors, fixed or rotating accumulation tables, centering devices, and thermal transfer or ink-jet printing systems. The self-adhesive stations are driven by stepper motors for precise application. It incorporates an electronic card for the labeling start signal and precise electronic adjustment of the label positions. Production ranges from 2,000 to 12,000 units per hour.

... chain conveyor is made of stainless steel 316, 316 L, or 304. This transporter can operate in 1 or 2 directions. Both models feature a direct drive motor reducer, hollow shaft type. The power supply is 380 V TRI (other voltages are available upon request). These conveyors are available in fixed or variable speed according to your needs. Their stainless steel legs for height adjustment are available in increments of 50 mm.

... roller conveyors and cross-transport systems, the degree of automation can be increased to generate further rationalization effects. Type: Fixed Installation Technology: Band, Miter Processed Material: For Metal Application: Multipurpose Additional Features: Semi-Automatic...

... conveyor and weighed on a continuous scale. Underweight and overweight portions are pushed by pushers onto separate buffer conveyors and transported to the rework station. Well-weighted portions go directly to the packaging machine. At the rework station, individual slices from the sorted portions are exchanged to achieve the target weight. Highly flexible tray insertion line for portions in trays Various tray sizes and orientations possible Automatic insertion of simple products (fan-shaped, boneless, and diced)...

...Conveyor Chains for Chain Conveyors: Smooth Plastic Conveyor Chain, Closed Plastic Conveyor Chain, Plastic Conveyor Chain with Fixed or Flexible Carriers, Steel Conveyor Chain, Magnetic Chain, and more. The link chains transport all kinds of goods and products with various requirements. Vertical and horizontal directional changes are easily achievable thanks to the single-link chains. We offer...

...We offer support rollers in every possible design. The use of support rollers is suitable for a variety of internal, directional transports. You choose the material, size, load capacity, drive, or simply tell us your individual requirements - we will provide the solution!!! - Gravity rollers - Powered support rollers - Conical support rollers - Fixed or friction drive - Available in steel, stainless steel, or plastic - Surface coating - Special rollers...

... adequate grip for product distribution on it. Cartons Rigid and semi-rigid products Mechanical parts Pallets Transport of heavy loads … Diameter: 800 mm or 1000 mm Support: Fixed legs or wheels Material: Stainless steel Speed: Variable via adjustment screw Options: Special guides...

...Stock conveyors can be produced as radial type according to the location of the facility, land conditions and customer demand. The Belt Conveyor chassis is connected to the ground from the tail module with a fixed joint. High-strength steel construction feet made to support the weight of the intermediate modules and the drive module are attached to the axle located on the wheels. These wheels are...

... carried out extremely easily and quickly. Telescopic conveyors manufactured according to machine safety requirements can be equipped with additional systems as needed. We can offer solutions with fixed bodies or hydraulic lifting and sliding systems. Please contact our engineering department for models suitable for your needs and application areas.

...Fine chips moving on the fixed sheet metal plate are discharged due to the powerful magnets rotating beneath the plate. In the Milmag series, there is no direct contact between the transported chips and materials with the carrier chain and magnets.

...Enables rapid carrying of packaged (such as parcel, package, sack etc.) and unpackaged products in a short time. Belt is selected according to the type of product to be carried, and speed adjustment can be preferred depending on requirements. It can be used in fixed height or as an adjustable unit. Commonly preferred types are PVC, polyurethane, wire belt, etc.

... modular construction allows them to be re-used later for a new conveyor path. Technical data: —Conveyor body material: stainless steel —Chain width: up to 1400 mm —Conveying speed: up to 80 m/min Optional equipment: —Centre drive+ automatic tensioning station —Retracting end —Hinged nose —Chain washing station —Moving deflecting pulleys —Product guides, fixed or adjustable, design depending on product —Supports to stabilise the conveyor systems at the desired conveying height —Other accessories, such as sensors, stoppers, etc.

... automation - LAN | ETHERNET-Technologie –for structured industry & building cabling - FO BUS-Technologie – optical data transmission - Coaxial & video cable Excerpt of versions: > shielded, unshielded > UV-resistant, Oil-resistant > UL/CSA recognized, listed > for fixed installation > for high flexible drag chain & robotic applications Excerpt of products: PROFIBUS - MULTIBUS - INTERBUS - CAN BUS - DeviceNet - FoundationFieldbus - ASi-BUS - SafetyBUS - EIB/KNX BUS - PROFINET - INDUSTRIAL ETHERNET Cat.5e...Cat.7A - POF - SIMPLEX, DUPLEX...

... or feeder hopper for parts transport. - Shakes your inclined chute for parts transport. Product features to your advantage: - Easy connection to 230V AC. - Power consumption 48W. - Oscillation frequency matches the mains frequency. - Side mounting on a fixed base via screw holes. - Alternatively, direct mounting on the container via two magnetic systems. Container wall minimum 1.5mm steel. - Functional air gap for a maximum stroke of 3mm. - Magnetic forces from 13N to 30N depending on the gap. - Control unit item 81432 for fine adjustment of the stroke available upon request.

...2 mobile beams with pneumatic cylinder displacement • Individual pneumatic retraction of the beams into the plane of the mobile frame for parade work • Pneumatic raising and lowering of the mobile frame by 500 mm • Pneumatic clamping of the frames with control on the console • PVC roller conveyor, 200 mm wide, fixed to the ground, with clearance for wide supports • Height of the beams 2500 mm • Usable pressing width 2500 mm PL974B Same machine with pneumatic tilting of the table Additional accessories: Entry or exit roller conveyors...

... industries. Drive variants: Head drive, direct drive, and center drive Motor: Three-phase geared motor 230/400 V 50 Hz (60 Hz) Speeds: 4, 6, 12, 16, 24, and 30 m/min. Standard Control: Frequency converter available upon request Belt types: Round belt d=12 mm Belt support: Via plastic sliding strip Supports: Fixed, swivel, and mobile Side guidance: Fixed or adjustable width and height...

... continuous and separate conveyor systems, such as baggage conveyor belts. In the case of continuous conveyors, the fixed field is specifically tailored to the customer, and the surface can be designed according to the customer's wishes in various executions. Closing direction: vertical pivoting Reopening: Motorized (standard)...

...Custom design and manufacturing. Custom design and manufacturing of: fixed or wheeled work tables with fixed, detachable, or foldable tops. Work tables with drip trays, roller conveyors, belts of various types, etc.

... cement silo produced in our Ankara factory is manufactured in accordance with ISO and CE standards. BOLTED OR WELDED PRODUCTION Welded silos are the best choice for short-distance transport. Bolted silos are the best choice for long-distance transport. 2 silos with 2 sets of screw conveyors, along with filters and other equipment, can fit into a 40-foot open-top container. Silo capacity m³/ton: 75 m³ – 100 Tons Sheet thickness millimeter: 5-4 Cement filling pipe Ø: 114 Weight kg: 6800...

... CAMOZZI Italy Belt conveyor -> weighing belt 800x12,000 mm Lifting and tipping system - Skip Twin Shaft Mixer, capacity 1500/1000; CM ITALY Cement weighing, capacity 1,000 kg Water weighing, capacity 1,000 liters Weighing system for 2 additives, max viscosity of 300 cSt ABAC TR air compressor Mixing tower Control cabin Automation system Cement silo and WAM Italy screw conveyors Concrete plant type PROMIX-45-S4 146,210 Euro...

... capacities ranging from 30 tons/hour to 300 tons/hour. The capacity of our plant is illustrated by images of our 150 tons/hour mobile screening and washing plant, which can be transported with a single tractor on four conveyors. VIBRATING SCREENS IN THE MOBILE UNIT Vibrating screens are used in all river and quarry plants to separate crushed material into desired sizes. All layers of the screen's...

...-mounted near the loading/unloading station. It is used in hazardous areas, gas and dust zones 1 and 21, for objects to be grounded that cannot be detected by the standard unipolar grounding control device EKX-4, such as containers, IBCs, or drums. Other application areas include grounding materials processed with trays on conveyors in automated industrial processes.

... a drive and tensioning drum, are used for conveyors. To maintain constant belt tension, tensioning mechanisms (screw, gravity - central or end) are employed. The tensioned belt is frictionally coupled with the drive drum, which, while rotating, winds the belt over sets of upper and lower pulleys and guiding drums. The belt picks up material from the feed hopper and transports it to the unloading point, which can be done: - with a fixed, one or two-sided plow chute, - with a dumping cart, - from the drive drum.

...Impregnation systems to close micropores in metal castings as well as in copper, aluminium or magnesium alloy castings. The parts to be impregnated are fixed in baskets. The latter are transported by a special crane system as well as with reservoir roller conveyors. Excess material is removed by centrifuging of the baskets. The impregnating agent remaining in the pores in fluid form is hardened by heating in a hot water bath. The process sequence runs fully automatically under a microprocessor control.

...The Frame Welding Machine is made of welded parts of different sizes and is designed to obtain the desired special H profiles. The machine body and the welding heads are fixed and the workpiece provide to be welded on both sides of the part to be welded by moving by means of driven conveyors. The hydraulic cylinders in the system provide the positioning of the H profile placing and fixing...

... flowing products) The vibrating frame ensures the discharge of the product out of the container into the hopper. The anti bridging and metering device DZR beneath the hopper ensures the discharge of the product out of the hopper und doses the product at the same time to the place the product is needed. Depending of the conveying distance, one or more intermediate conveyors have to be set in...