coupling housing

...Storage Housing D-70 Mammoth (Quick Change) (Spare Part) Length / Width: 0 mm Axle Ø: 0 mm Speed: 82 m/s...

...Coupling housing nominal size 32 made of PA66 GF30 (Technyl A218 V30 black 34 NG) with 3 outlets Country of origin: Germany...

... extensive range includes RJ45, USB / Mini USB, and Fiber Optic LC Duplex connectors in plastic, metallized plastic, or full metal versions. Housing material: Plastic, metallized plastic, metal Design: Installation housing set, inline coupling, connector set, patch cables, protective caps Locking: Bayonet, M28 Mounting type: Front, rear panel mounting Design: IP67 RJ45 / USB / Mini USB / Fiber Optic / Power Bayonet...

...High-elasticity coupling ARCUSAFLEX-VSK for drive shaft assembly * Linear torsional characteristic * Elements available in various spring stiffnesses * Increased damping performance through friction damping * Maintenance-free coupling design * Radial bearing close to the universal joint * Different designs for various types of drive shafts * Versatile designs with SAE connection dimensions or custom specifications * Compact construction, high-elastic element protected by housing * External visible slip protection Type: Elastic Additional features: High-elasticity Mounting: Flange...

...Elastomer spider polyurethane Shore 98A. Coupling housing and clamping hub, aluminium. Expanding mandrel steel. Screws steel. Centring rings 1.4301 stainless steel. Version Coupling housing black anodised. Note The motor adapter set with elastomer dog coupling system (elastomer coupling with expanding mandrel) provides a simple and costeffective solution for connecting electric motors. Advantages...

... construction. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection. Reliable Connection Conductor Diameter:0.002 mm to 0.6 mm Max. Cable Diameter:4.5 mm Temperature Load:Max. 200 °C Online Available:Type K, J, E, N, T, U, R/S, B On Request:Type C Colour Designations:DIN IEC, DIN 43710, ANSI, NFE, BS, JIS, etc.

...Coupling Housing Casting Method:Low pressure casting Material:AlSiI0Mg(a) Single weight:16,830 kg...

... measurements due to a wide range of gearbox transmission ratios. Built-in friction coupling for potentiometer protection. Compact model. Potentiometer output, current or voltage. IP68 protection type with possible oil filling. Mounting Fine reading. Hollow shaft passing through up to 20 mm Ø. Adaptation to different measurements due to a wide range of gearbox transmission ratios. Built-in friction coupling for potentiometer protection. Compact model.

...Sprocket with teeth, blind sprocket, sprocket hub, bearing housing, coupling.

...Fiber optic termination point EK 330 compact for single-family/multi-family homes and/or business customers, applicable for plug connection and fusion splice. - Cable/microduct entry and exit with Ø 5, 7, 10, 12 mm freely selectable on the left or right - Removable mounting plate for fiber management and coupling/splice protection storage - Slot for 6 couplings - Compatible with standard individual sealing plugs for microducts - Installation/commissioning/service without special tools - Size W x H x D: 163 x 242 x 46 mm...

... ribbed Race rings:54SiCr6 Rolling element:100Cr6 Worm wheel:Wear-resistant bronze alloy Worm shaft:CK45N hardened and grinded Operating temperature:-10 °C to +80 °C Rotational speed:Max. 7 min-1 Mounting position:Any, preferably horizontal Lubricant:With bearing grease via grease nipples Options:Inductive proximity switch, flange/coupling to mount the motor, motorization...

...The FDABURML coupling module is a combination of an air valve and a fire damper, coupled with a single housing. This is an alternative to typeical fire valves. The main advantages of the FDABURML are better fire rating and a smaller size with more product configurations and application options. The main component of the coupling module is the CFDM fire damper. The fire damper is available in Ø...

...These components are produced by PFLITSCH in sizes ranging from M16 to M40, or Pg 9 to Pg 36. To facilitate the passage of cables at an angle out of electrical cabinets or machine housings, PFLITSCH has created various short and long bent flanges made of die-cast zinc and PA plastic. They are screwed onto the housing and are designed – depending on the model – for cable glands from M16 to M63, or Pg 9 to Pg 48. An O-ring ensures the sealing of the flange against the base.

...The housing coupling with standardized connection dimensions ✓ Play-free ✓ Easy installation ✓ High power density ✓ High torsional stiffness ✓ Low maintenance The EAS®-HTL is a form-locking, latching, disengaging safety coupling based on the ball-sinking principle. The coupling protects the drive train from excessively high torque shocks that can occur due to unforeseen blockages. Function in...

...The AM series has been specifically developed for the medium power range in plant and apparatus engineering. High-quality housing and bearing materials allow for a tailored adaptation to almost any pumping task. * Drive is via a magnetic coupling * Application examples: acids, alkalis, acid and alkali mixtures, solvents, alkaline degreasing baths, galvanic baths, photochemicals Properties...

... coupling below the mounting flange. According to your tank size, the LRE series agitator is available in four different frame sizes. Shaft diameters of 40 mm to 130 mm with lengths of up to 12,000 mm are realized. Sealing housings supplied with shaft seals in various materials are feasible, stuffing boxes or mechanical seals are an alternative. Explosion protection to ATEX 2014/34/EU for explosive zones 0 to 2 for gases and for explosive zones 20-22 for dusts (device group II, categories 1-3).

... hollow shaft encoders designed for motor coupling, respectively by joint and by anti-rotational elastic metal support. For all the types the ppr no. ranges from 2 to 12500, with or without zero pulse (E40 or E41). The series standard case is out of ABS plastics, with axial or radial cable or connector outlet; series RE40 with aluminium housing and IP65 radial cablepress outlet is also available. Pulses per revolution range :2 to 12500 Supply:5Vdc or 8/24Vdc Output signals:push-pull, line driver...

...Housing diameter 12.7 millimeters, usage time: 108 movements, recording speed: up to 10m/s FEATURES Measurable displacements from 0… 25 millimeters and 0… 250 millimeters ± maximum 0.05% F.S. non-linearity. Housing diameter 12.7 millimeters Usage time: 108 movements Recording speed: up to 10m/s Integrated cable 1 m. Special versions: Coupling with spherical joints or flange binding upon request Type: linear Contact / non-contact: contact Technology: potentiometric, mechanical Output signal: analog Other features: compact, miniature...

... replaced quickly if necessary. Even larger fans with an impeller weight of several hundred pounds and an impeller diameter up to 1,250 mm are available. The PullOut model is available for direct-driven, belt-driven and coupling-driven fans. With this type of fan, the impeller is removed from the housing together with the motor bracket and the motor itself, making it again quick and easy to clean. Vol­ume flow:ap­prox. 180.000 – 720.000 m³/​​h Pres­sure in­crease:ap­prox. 25.000 – 30.000 Pa Tem­per­a­ture:ap­prox. 250 – 500 °C...

... an H-shape. For environments requiring a corrosion-resistant design, steel parts can be supplied in stainless steel (columns, rod coupling, screws), while the housing and plate remain made of anodized aluminum (suffix /AC after the article number). All special strokes can be implemented with a maximum stroke of 200 mm.

... may be a better option. Centrifugal fans are available in single and double suction versions. Volume flow: 100 – 300,000 m3/h Pressure: 100 – 50,000 Pa Inlet size: from 63 to 2500 mm Housing thickness: from 1.5 to 20 mm Models: RNZ (Low Pressure), LRZ (Low Pressure), PRZ (Medium Pressure), MRZ (Medium Pressure) Motor power: 0.1 kW to 800 kW (Motor frame 63 to 450) Drive: Coupling...

... sold with our bayonet filling systems passage Ø 40 mm with flange or with our niches series 32–40–50 for connection to flexible fuel hose of different diameters (Ø 32 mm / 40 mm / 50 mm) or with our complete filling systems, that can be customized in relation to specific needs. The additional use of built-in housing for filling caps make easier and very faster the assembling operation of fuel filling systems in the most industrial applications. PASSAGE DIAMETER:40 mm Passage...

...Chain coupling, Chain coupling with housing from 3Transmissions, a supplier and manufacturer of mechanical transmission products and components, for your mechanical applications and to solve your maintenance or new transmission installation issues. 3Transmissions and its partners enable you to address your most complex transmission applications. The 3Transmissions ranges are ATEX certified for...

...Hardware solution for non-reciprocal coupling of 3 - 5 compensation systems • suitable for reactive power controller BR7000-1/S485 • ready-to-connect application solution • no summation current transformers required • panel mount housing 212 x 156 x 60 mm • graphic display 7": 800 x 480 pixels • protection class: front: IP65 • operating voltage: 24VDC...

...Scope of delivery: 3-point housing mounting, housing prepared for sealing, board labeling using assembly printing, spring-loaded terminals. The coupling relay is ideal for controlling heating systems and heat pumps. The coupling relay replaces a round control receiver or a tariff switch timer, which, in conjunction with an electronic meter that has a timer and corresponding switching outputs, has insufficient switching capacity. The coupling relay achieves galvanic isolation between the meter and the customer load.

...The centrifugal clutch without housing is used when a housing is already available on the customer side. In this case, the centrifugal clutch is delivered without a bell. A typical application for a centrifugal clutch without housing is the vibratory rammer. In principle, we manufacture two different types of centrifugal clutches: on the one hand, the standard clutch with profile hub, and for...

...The impeller is connected to the motor via an intermediate shaft with an elastic coupling. Single-sided suction fan with motor and bearing base. Suitable for high drive powers and large impeller diameters, as well as for material transport. Spiral housing made of welded steel sheet. Pressure and suction side with standardized flanges. Manufactured in: Germany...

... with groove ball bearings, brakes on the steering wheels, in accordance with the European standard EN 1757-3. Housing is galvanized. Standard wheel configuration for medium loads. Quiet operation. The pull handle is spring-supported.

...This 0.09 kW electric motor operates at a speed of 1500 RPM under a nominal frequency of 50 Hz. Its standardized housing allows for easy and quick replacement or installation without any modifications compared to an equivalent brand. Its flange mounting with smooth holes and B35 feet has an outer diameter of 120 mm, a mounting diameter of 100 mm, a fitting diameter of 80 mm, and a footprint of...

... reliability and ensures the required durability of the entire structure. Technical Assessment and Economic Benefits The strength of the housing walls is over 20% higher than that of known analogs. Deformation of the housing walls under excessive impacts is excluded due to the design features of the friction assembly and the use of thick walls in contact with the friction assembly (patent). The thick walls provide high strength against both axial impact loads when closing the draw gear and the compressive forces exerted by the friction assembly.