...High-performance heating cartridges with integrated thermoelements are recommended wherever there is not enough space for separate temperaturesensors.
...Digital Panel Meters for the Automation and Process Industry. Powerful range in the field of process variables, temperature, strain gauge sensors, electrical measurements, pulse input.
... increased measurement reliability, as the common measurement point allows for direct comparison of the local display with the electric temperature sensor, and vice versa.
• Installation costs for temperature measuring instruments are reduced, as only one measurement point needs to be set up for both electric temperaturesensors and local temperature measurement.
Design: 90° angled version, angled connector
Display range: -30...50 °C, 0...60 °C, 0...100 °C, 0...120 °C, 0...160 °C, 0...200 °C...
...Extremely robust, pressure-resistant, mechanically stable, and vibration-resistant. Designed for use at hard-to-reach measurement points with very short response times.
Advantages
Operating temperature range from -200°C to +800°C
Bendable, flexible mineral-insulated cable (MI)
Protection tube diameter starting from ø 1 mm
Waterproof version (IP68)
Usage
Sheath resistance...
...Our room humidity and temperature sensor with active output is designed to measure humidity and temperaturein indoor spaces.
The built-in humidity transmitter converts the measurement signal into a standard signal of either 0-10V or 4-20mA. Our humidity and temperaturesensors are used in non-aggressive, dust-free environments, in refrigeration, air conditioning, and clean room technology, as...
...Permanent temperature measurement on cables and electrical installations. In electrical cabinets and on busbars. OPC interface for MRT/GLT. No maintenance, easy installation.
... ports for external temperature/humidity sensors, two dry contact inputs and built-in Power over Ethernet (PoE).
RJ45 Sensor Ports:Two RJ45 modular jacks for connecting temperaturesensors or combined temperature/humidity sensors.
Dry Contact Closures:Two screw terminal pairs for connecting dry contact devices and the liquid detection sensor.
USB Port:One female Micro USB connector for connecting a...
... impacts. The measurement output is digital via an I²C interface, with the address being customer-specific. Thanks to the bus capability of the interface, combining multiple sensors within a system is easily achievable.
Measurement range:: 0...80% rH, 80 - 100% rH (short-term); -40..+100°C
Accuracy:: +/- 1.8% rH in the range of 10..80% rH; +/- 0.2% rH in the range of 0..10% rH; +/- 0.2° C in the range of 0..60°C
Operating pressure:: max. 150 bar...
...This controller is designed for laboratory or industrial applications for a 19-inch rack.
The device features digital and relay outputs.
On the input side, sensor data from thermocouples, PT100 temperaturesensors, as well as analog unit signals can be processed.
The integrated USB host establishes a data connection to storage media and has an Ethernet interface for configuration via PC. For...
...Discover the Innotrack recorder, a cutting-edge tool designed for professionals, providing you with real-time geographic location as well as the precise temperature of your packages, loads, or containers.
Equipped with a built-in SIM card, this reliable and accurate recorder seamlessly transmits the collected data. Its digital sensors, meticulously calibrated at the factory, ensure high...
... humidity
— Interchangeable without adjustments
— Pressure-resistant version (up to 16 bar) upon request
Mounting:for integration, built-in
Applications:OEM applications, air conditioning, concrete, industrial, others
Other characteristics:digital, with temperature measurement, high-precision...
...-strength DATA LOGGERS with six or 12 measurement channels, various THERMAL BARRIERS that protect the electronics from heavy-duty process conditions, the Datapaq Insight ANALYSIS SOFTWARE, and a selection of fast-response, high-temperature type K or N THERMOCOUPLES.
Designed to ensure minimum running costs, DP5 loggers store up to 10 profile runs before download to a PC. The built-in harsh...
...The DI displacement sensor range allows for non-contact measurements of the absolute position of hydraulic or pneumatic cylinder pistons, as well as in other applications. Built robustly, shock-resistant, and ensuring a very long lifespan due to the absence of moving parts that cause wear, DI sensors are both economical and highly reliable. Magtrol sensors are designed to operate across a wide...
... computer.
The ScanIR3 linescanner and thermal imaging system has one of the fastest scan speeds in the industry and offers complete data about even the highest-speed manufacturing processes. Unlike point sensors that measure a single point, the linescanner measures multiple temperature points across a scan line. Its motorized mirror scans at rates up to 150 lines per second, allowing rapid detection of...
... medium to be heated leads to an efficient realization of the electric energy to thermal energy. Special materials of acid constant rustproof steel stand for the heating of aggressive media by disposal.
Alternatively, the heaters can be delivered also in the materials INCOLOY, INCONEL, HASTELLOY and MONEL.
The duct heaters essentially consist of the following main-components:
Duct with flat flanges
Rod heating elements
TemperatureSensors (Thermostat / Thermocouple / RTD)
Electrical terminal box...
...With the FIMO TA 03, you can easily monitor the temperature of your drive.
Evaluation of the temperaturesensors installed in the motor
All three motor phases can be monitored
Galvanic isolation protects control electronics
Switch-off temperature and pre-warning temperature adjustable
Selectable temperature pre-control
Display of operating states via built-in status LED...
... port, built-in amplifier and side-load absorbing bearings.
With no rotating parts, this sensor needs no maintenance when used correctly.
Available accessories include mounting brackets and flange adapters, which enable quick, easy and practical integration of the sensor into existing or newly developed setups and test benches.
The strain-gauge based sensor’s modular design allows precise...
...EGE infrared detectors are designed for the detection of hot objects as well as for temperature recording and measurement. The sensors capture infrared rays from warm and hot objects ranging from 20°C to 800°C. EGE infrared detectors are built for use in extreme conditions. With their glass and stainless steel housing, they are waterproof according to IP 68 / IP 69 standards. With additional...
...Model No.: LSP-4092BD;
Constitue:
1 control box, 4 sensors,1 LED monitor, a string of power lines;
Function:
A. Buzz indicator (buzzer built-in the display);
(1)1.5m—0.8m: Bi,Bi,Bi;
(2)0.8m—0.4m: Bi,Bi,BiBi (the closer, the faster);
(3)0.4m—0.0m: BiBi…(continuous beeping);
B. Visual indicator;
(1)2.5m—0.3m: display the distance accurately;
(2)0.3m—0.0m: display 00...
...-Large, clear display
-100% reliable operation with all battery types
-Timely and real battery replacement warning
-Built-in battery voltmeter
-Easy installation
-Temperature measurement only in Celsius (C)
Functionality:
-Heating/cooling capability and smart DHW (Zone Control) in all models
-Independent Domestic Hot Water (DHW) capability in some models
-Anti-freezing function
-Intelligent adaptation to the inertia caused by the size of the heated space...
...Electromagnetic
Process pressure: 1 bar
Process temperature: Up to +120°C
Installation: Built-in flange
Type of conveying: Free fall, also for descending pipes
Flow rate: Up to 300 t/h
Pipe diameter: Up to 200 mm
Output: 4 to 20 mA, ModBus, ProfiBus...
...LogBox RHT is a small portable electronic temperature and humidity logger with builtintemperature and humidity sensors.
Name:Data logger
Temperature measuring range:-40...+80 °C
Accuracy:±0.5 °C at 25 °C
Resolution:0.1 °C
Humidity measuring range:0...100% RH
Humidity accuracy:±3% RH (20...80% RH)
Humidity resolution:0.1% RH
Memory capacity:32000 (32k)
Power supply:Battery 3.6 V, 1/2 AA...
... sensor information on its built-in screen.
This innovative device, patented by Escom Enhanced Solutions, is characterized by its ease of use, mobility, accuracy, and speed of interaction. It is a practical portable device that allows real-time monitoring of temperature, pressure, MAC address, signal strength, sensor name, and charge level.
...These temperature gauges are designed for use in chemical, petrolchemical processing industries.
They are built to resist the most severe operating conditions created by the ambient environment and the process medium. An TIG welded case/bulb strengthens the whole construction. A leak tight fit is ensured if the instrument is filled with a dampening fluid to prevent damage due to vibration.
...IoT LoRa WAN Sensors for Tracking Various Asset Classes
Functionality
• Suitable for indoor and outdoor use
• Tri-color LED for status indication
• Built-in battery with up to four years of runtime
• Integrated sensors for capturing motion and climate data
• More than 1,500 m range outdoors
• LoRaWAN Class A protocol
• Remote configuration parameters via LoRaWAN downlink
• Integrated operating...
...Compact network sensor with 2x 1-Wire ports as well as Ethernet and Wi-Fi support for monitoring environmental parameters
The SD-2x1Wire from HW group’s SD product line monitors temperature, humidity, and other environmental parameters. Up to four 1-Wire or 1-Wire UNI sensors can be connected. The network sensor can be conveniently controlled remotely via the free SensDesk portal or the SensDesk...
...The HT-C inverter series utilizes advanced technology that enhances performance and reliability: two high-speed DSPs with complete digital control fully ensure high-quality power supply, a high input power factor, and low input current distortion. With a built-in transformer, the HT-C provides increased safety for critical loads. The HT-C includes multiple protections, over-temperature protection...
... be added to the tool effortlessly. Whether it’s stored in a glove compartment or toolbox, the VT37 is the perfect partner for servicing TPMS.
Activate and display all sensor data in seconds: ID, tire pressure, tire temperature, and battery status etc.
Comprehensive make, model, year specific relearn procedures, with instructions, built-in
Activate, read and service all major OEM & aftermarket sensor brands
Program over 20 aftermarket sensor brands
Search TPMS sensor replacement part numbers
Test vehicle keyfob signal strength/battery status
PN:VT37-0000...
...The dose controller UV-MAT continuously measures irradiances, calculates doses, and stops irradiation at the set target dose. Two spectral ranges can be separately controlled. Thus, UV-MAT ensures a constant dose independent from lamp aging, temperature, and pollution.
The measurements are made with calibrated radiometric sensors. The built-in diffusers ensure the cosine correction that is...
... continuously develop our own software using Siemens material for the automatic monitoring of the ovens during tests on the basis of a programmed curve and with data measured by the various sensors and probes (temperature, pressure, oxygen, radiation, deflection,…)
The ovens can be flexible and equipped with a loadbearing system, an outdoor chimney with an extraction or treatment of flue gas, walkways, camera, deflection measurement system, etc.
We also manufacture frames, removable walls and caps to modulate space in ovens according to tested samples.
We move, adapt and renovate existing installation.