air to water cooler

...Dry coolers are simple and reliable equipment. Their operating principle is based on a sensible heat exchange between air and water, where: air is drawn in by fans through a finned coil, while water (or a mixture of water and glycol) flows through the pipes that make up the coil and is cooled when the ambient air (cooler) passes over its surface. The fins are used to increase the overall heat exchange surface area so that the equipment can be as compact and efficient as possible.

...The ERW ax systems for industrial process fluid cooling (water, water and glycol) are air-cooled units that use EC (Electronic Control) axial fans. This range includes a series of models with cooling capacities from 2.1 kWf to 595 kWf. Three different versions are available for various outlet fluid temperature ranges, agreed upon with the customer during the design phase. The entire range uses refrigerant with a GWP of 631.

...The new commercial cubic air cooler BOREA is the first project developed according to Stefani’s new philosophy. The company redesigned its heat exchangers to obtain maximum efficiency and thermodynamic performance. There are 192 models and plenty of accessories in the range, including water defrosting for the largest commercial sizes. Machine length:675 ÷ 4000 mm 5 fin spacing:4 – 5,5 – 6,5 – 7,5 – 9 mm Fan size:Ø 250 – 315 – 350 – 450 – 500 mm DT 8K Capacity:1 ÷ 60 kW Number of fans:1 ÷ 4...

... compressor used, after 10-15 minutes of operation, it will be hot air that comes out! And hot compressed air at 7 bars in a PVC pipe will automatically create water, leading to moisture that will go directly into the pressure tank, which will become increasingly faulty, and for you, increasingly frustrating!

... return are carried out by air ducting which is the best idea for the complex areas to cool down. Various compressor and refrigerant type usages brings trouble-free operation with high cooling water temperatures. Heating can be carried out with electrical heater, steam, hot water and thermal oil resources. Cooling range:5 kW - 192 kW Corrosion Resistant:Durable design against corrosion Vibration Resistant:Durable Design Against Vibration Dust Resistant:Durable Design Against Dust...

...Air-cooled chillers as water cooling units; with environmentally friendly refrigerant R454B (GWP 466); hermetic scroll compressors and cooling capacities from 73 to 145 kW...

...The WWKGD40 is a compact water cooler that can easily be installed in, for example, coffee machines or a kitchen cupboard. The built-in thermostat allows you to set the desired temperature. The water cooler can be easily connected to the water supply network. It requires hardly any maintenance and always supplies refreshing cooled water. Type:WWKGD40 Outer dimensions:250x270x390mm Mass:21 kg Power supply:230V-50Hz Electric power:160 (0/45ºC) Cooling power:300W (0/45ºC) Capacity:25 l / hour at 10K Environment temp:max. 32ºC Refrigerant:R134a Water connection:3/4" BSP male thread...

...The Breezer MACH4 is the new version of the original Breezer. The MACH 4 looks tougher and has a water tank of 341 L, but otherwise shares the same features and technical specifications as its predecessor. This powerful and mobile adiabatic cooler on sturdy wheels has an air flow rate of nearly 24,000 m³/h. Thanks to the internal water tank of no less than 341 liters, this device can operate...

...offering a reliable solution for keeping your refreshments cool on the go. Crafted from recycled materials, the Bangkok Cooler is an eco-conscious choice for those who care about the environment. Its durable construction ensures long-lasting performance, while the sleek design adds a touch of elegance to your outdoor gear. Whether you're planning a day at the beach or a weekend camping trip, this cooler will keep your drinks and snacks fresh and cool, providing a convenient and sustainable option for all your outdoor activities.

...The new RAUCH humidification coolers refresh through water evaporation (adiabatic cooling). With this solution, you save up to 90% energy compared to known techniques and do not require exhaust ducts.

...Closed Air Circuit, Water Cooled coolers are ideal for cooling generators and large electrical motors, no matter the environment.

...FRESC MANN PREMIUM portable industrial evaporative air cooolers from 5,760 to 13,511 m3/h The FRESC MANN portable industrial evaporative air cooler are ideal for cooling naturally and with low energy consumption in all kinds of work areas, event tents, heat sources, etc ... Its basic operating principle is to suck in the outside air and pass it through some panels moistened with water. Once...

... of well heat transferring materials are put on the tubes. Very often air-/water heat exchangers are used as exhaust heat exchanger to gain the energy out of warm or hot exhaust fumes. Finned tube heat exchangers can also be used as air heater, air cooler or condenser. Materials (Tube and frame):1.4301, 1.4404 und 1.4571...

...The dry cooler from N-thalpie GmbH is used in refrigeration and air conditioning systems to dissipate the thermal energy from process fluids (e.g., coolants or refrigerants). Unlike water-cooled systems that use water as a cooling medium, dry coolers use air as the cooling medium.

... Cools spaces up to 105 m² Productivity: increases production for both people and machines Sustainability: performance water as the cooling medium Cost efficiency: low power consumption Safety: enhanced safety through protection of employees and machines Simplicity: easy installation and handling Data Sheet: http://www.delta-temp.com/generate-pdf.php?product_id=98&ln=EN...

...Our range of transformers oil water coolers can be supplied in different mounting variants. The standard water cooler version is designed for direct mounting to the transformer tank. In addition, our range of products comprises free-standing transformer oil coolers designed to customer specifications. The coolers in general are used for specific types of transformers, such as furnace transformers or rectifier transformers. A further application is machine transformer cooling at hydraulic power plants. Transformer oil water coolers are available in different design versions.

... its advanced technology, the water-cooled drive technology helps extend the lifespan of the machines and reduce operating costs. It is easy to install and maintain, making it a cost-effective solution for companies looking to optimize their production processes. This technology is an essential component of KUHNE's extrusion systems and contributes to improving the quality and efficiency of production.

...The 2500 KW cooling tower is designed to provide high performance for a minimal unit size. The specially designed drift eliminators reduce drift to 0.002% of flow. When supplied with chilled water, the cooling tower can also be used as a bulk air cooler for applications requiring large air flow. Designed and assembled to Aggreko’s standards. Packaged into 20 ft. ISO container frame. Brentwood...

...AIR- AND WATER COOLED COLD WATER UNITS gwk chillers in the sklc series are air-cooled compact cold water units with integrated condenser gwk chillers in the skw series are water-cooled compact cold water units cooled with external cooling water These chillers are equipped with screw condensers; the power regulation of the capacity to be dissipated is continuous. Water-cooled cold water...

... motors comply with international standards 34-1. The following conditions apply: continuous operation S1 and a DC power supply that is fully controlled by the drive. Features: - Depending on the application, the motors can be equipped with an IC0666 air cooler or ICW81 water cooler. - Preparation for encoder or tachometric dynamo mounting 20 or 40 or 60V/1000T - Upon request, the motors can be custom-made to replace existing motors - IP23 - Heating class F - Available in 12-24-48-220-440V - Cast iron...

...Protection for hot temperatures Oil cooler – radiator for inside temperatures exceeding 40°C. This option comes along with the air-conditioning in the electrical control cabinet, the water cooled condenser for the HP Dryer. Specific selection of electric motor ; IP55 motor for hot and dusty environment, tropicalizing (see electrical options) Protection for cold temperatures Oil warming for inside...

...The adiabatic air cooler is the only technology capable of providing the same water temperature ranges as traditional cooling towers without being subject to regulations. Operating without refrigerant fluid, the adiabatic air cooler easily replaces the cooling tower without modifying the existing cooling circuit and without creating new operational constraints. The EWK-A adiabatic air cooler is...

...Suitable for multiple products (except for leafy vegetables).Decrease in the product temperature by several tens of degrees according to the ambient temperature. Low water consumption, respect for the product and the environment. Possibility of filtering the air intake to the cooler. Capacity:500 kg/h to 15t/h according to the unit weight of the products processed and the model.

...Water Cooling Units 4 - 122 kW Portable water cooling units 4 - 135 kW comply with the new ECO design directive air-cooled version with microchannel condenser up to max. 46°C ambient temperature (optionally also water-cooled) many options already standard, such as: -closed tank (up to max. 2.5 bar) -air intake filter -outdoor installation (condensation control, crankcase heater, etc.) Many options available: EC brushless EC fans 0-100% speed controlled and ductable unit without tank as a flow cooler manual filling various interfaces UL - 480V/60Hz version etc.

...In a liquid cooler, the warm liquid medium is cooled in the pipes using cooler ambient air. Due to the lower heat transfer on the air side, the surface of the smooth pipe is enlarged by finning. Depending on the flow rate and pressure drop, a single or multi-path design is chosen. Heat dissipation is achieved through quiet axial fans. Features: • Various designs are possible • Due to its...

...The new QBE chiller range has been specifically designed to meet the application demands in the industrial sector and provide precise control of the chilled water temperature with absolute reliability for continuous operation (thanks to the hot bypass valve option). It is particularly suitable for dedicated process cooling in plastic molding and extrusion, laser cutting, precision mechanics, pharmaceuticals, food industry, etc. The range consists of 12 models with cooling capacities from 2 to 25 kW and is designed for outdoor installation (excluding QBE002 and QBE 003÷007 as an option).

...Used air cooled water chiller TRANE in very good condition. This chiller is composed of 4 SCROLL compressors and a hydraulic module. Its operating range is from 10°C to +20°C outlet exchanger. We offer a wide range of models of all capacities for sale, so please feel free to contact us by email (lucas@mia-equipements.com). Item code: CP30117 Brand: TRANE Type: CGAM046 Power: 128 kW Capacity at: 7/12°C Ambient T: 35°C Refrigerant: R410a Year: 2014 Voltage: 400V/3ph/50Hz Dimensions: 2905*2266*2150 Weight: 1545 kg In stock: 1...

...4 in 1 - Evaporative air cooling, ventilation, humidification, filtration Perfect for hot and dry areas It cools the air in a natural way thanks to the evaporative technology Ready to Use - no installation, no additional pipes required Ultra Low Energy Consumption The air is purified thanks to a double filtration system Anti-dust filter and easy cleaning evaporative panel...

...Whether you need a 700kW cooler in an emergency, for scheduled maintenance, or for additional cooling, our expert team can assist you. We will find the right rental solution for your cooling requirements. Wide operating range from 17.8 °C to 55 °C ambient air temperature and 15 °C to 21.1 °C liquid outlet temperature. Variable speed drive (VSD) compressors and condenser fans. R134A refrigerant...

...The ARA-T2 series air cooled chiller devices are units employing high efficient R410A cooling fluid with zero ozone thinning potential and having two scroll compressors. The device will start to run at half capacity in cases where the capacity need is low and the electricity consumption will be decreased significantly by being equipped with two compressors. Beside this, it operates at half...