air force

... mm (0.0004 in) Increment for stripping length:0.01 mm (0.0004 in) Min. insertion depth with thin grippers:8 mm (0.31 in) Article library: Max. number of articles:1500 Sequence function: Max. number of steps:100 Typical cycle time:0.35 s Electrical connection:100 – 240 V AC, 120 VA Compressed air connection:5 – 7 bar Screen size:5” Switch-on time from standby mode:< 1 s Ambient temperature for operation:5 – 40 °C Dimensions (W x H x D):5.5 × 11.4 × 18.6 in Weight:11 kg (24 lb)...

... lateral adjustment screw allows you to set the appropriate braking force and use the positioner safely. It is a practical invention that minimizes the risk of injury and greatly facilitates handling. A major feature of the positioner is that the desired position is maintained safely and reliably, even when the load changes. Capacity::0.5 - 7.0 kg Cable travel::1.5 m Made in::Germany...

... wasteful expenses on your energy bill. Maintain the health of your equipment with the SDT200 ultrasonic measurement device. Listen to your air leaks, monitor and listen to your bearings, safely inspect your electrical equipment, and schedule repairs at your convenience, well before they force you to halt production – all thanks to ultrasonic technology. Function: Multifunction detector Screen...

...The Banner Plastic Factory continuously invests in its production facilities and state-of-the-art technology. Our range of services starts from 350kN to 7000kN clamping force, allowing for the production of parts weighing from 0.5 grams to 2,500 grams. Starting with a clamping force class of 1200kN, the machines are equipped with removal robots. Peripheral devices at the cutting edge of technology: Temperature control devices: 160°C Material pre-drying: Vacuum, hot air Moisture measurement: Brabender Use of inline camera inspection systems and much more.

... galvanized, passivated steel - Equipped with a magnetic piston for end position detection/position verification - Proximity switch available as an accessory for position verification - Option for speed throttling - Clamp is galvanized and passivated - Rivets made of stainless steel - Case-hardened bearing bushings, all bearing points are pre-greased. - Delivery complete with tempered and galvanized pressure screw MS10/20 and MS10Z - Limited-time promotional prices starting from €109 - CAD data available upon request! Size: 1 Max. holding force: 1.2kN...

... drawer model • Front loading • Made of AISI 304 stainless steel • Temperature Scale: -5°/+10°C • Operating Temperature: +2°/+4°C • Power: 800 - 1600 W • Illumination: 36 W fluorescent • Defrost: Fully automatic • Air Flow: Fan controlled • Temperature Isolation: PU Isolation • Voltage: 220-240 V/50-60 Hz • Dimensions of the Double unit (WxHxL): 845 x 2410 x 1970 mm • Dimensions of the Triple unit (WxHxL): 845 x 2410 x 2740 mm -- For more details about this or other morgue units or products, please send us an email or give us a call.

...The oil mist separator is used in CNC machines and in the metalworking industry. Oil and emulsion mist generated during the operation of industrial machines contaminates the work environment and affects the functionality of machines and the health of people (oil film, slip hazard, poor air quality, etc.). Our oil mist separator provides effective separation of oil-containing particles thanks to state-of-the-art technology (based on centrifugal force) and ensures a clean and safe working environment.

...fast oneclick cantilever alignment, panoramic optical view and multiple scanning on 5×5 mm range.Cantilever recognition and automatic laser alignment both in liquid and air Autofocus Measuring heads:AFM and STM (stationary, automatically interchangeable); liquid AFM, and nanosclerometer head Available SPM modes:AFM, STM, nanosclerometry in air environment AFM in liquid environment System of...

... raw state with fine layer lines or finished upon request (e.g., painted). A disadvantage is the lower detail resolution resulting from the extrusion of the plastic layers (layer thicknesses of 0.330, 0.254, 0.178, 0.127 mm). Therefore, the process is less suitable for smooth visible parts. The strength of the parts is lower in the Z direction, and thus the parts are oriented according to the direction of force application. Stratasys | Fortus | Fortus 900 MC | Fortus 360 MC | F 370 |...

... crimping of the loop - the cutting of the strap after crimping - Tightening force: 9000 N - Crimping of staples with 2 notches - Net weight = 18 Kg. This machine is powered by a small air compressor with a pressure of 6 bars. (Optional supply) PRODUCTIVITY: After clearing the ballast under the cross tie, strapping one cross tie takes about 1 minute. (Wearing gloves is mandatory) Manual strapping...

...existing buildings, and renovations, as well as for filling or casting. House connections for electricity, gas, water, district heating, communication lines, air conditioning systems. Wall openings, penetrations in building walls. Penetrations or grooves in the aerospace industry, rail vehicles, automotive industry, mechanical engineering, shipbuilding, swimming pool construction, and the...

...A practical, compact, and powerful leveler, ideal for gardeners. The GTPC540 leveler is equipped with a GTE200 engine and offers a working capacity of 660 m²/h; impact force of 13 kN. Delivered with foldable transport wheels. Engine: 4-stroke, air-cooled Engine type: GTE200 Power: 6 hp Weight: 83 kg Frequency (vibrations): 91 Hz Impact force: 13 tons Vibration depth: 30 cm Forward speed: 0-24 m/min Capacity: 660 m²/h Plate dimensions (L x W): 53 x 50 cm Dimensions (L x W x H): 110 x 50 x 83 cm...

... Highest clamping forces are achieved with low compressed air consumption. The maximum operating pressure is 10 bar. The clamping jaws can be used horizontally or vertically. They have free passage for clamping rod material. Application For clamping workpieces on drilling and milling machines and during assembly work with pneumatic and electric screwdrivers. High clamping force allows for threading in one pass. Usable for deforming workpieces. Cost-effective use as a clamping element in rotary indexing machines, special machines, and transfer lines.

... and falls off sooner or later, depending on the appropriate adjustment of gravitational force. Sealed breakable rivets and their advantages: Sealed rivets are characterized by higher resistance to shear and breakage, protect against vibrations, and are 100% impermeable to water and air, provided that the appropriate hole dimensions are maintained. Applications: - shipbuilding industry...

... bubbles to expand in a fraction of a second and transforming the liquid, for example, into whipped cream. How does a whipped cream container actually make whipped cream? To make whipped cream, one should use a thickening (whipping) cream. This cream has an ideal fat content between 27 and 36%. When filling the N2O cream charger into the canister, the N2O breaks down into the fat. When the switch is pressed, it releases the force that expands the nitrous oxide in the fat particles, which in combination leads to the formation of whipped cream.

... Features to Your Advantage: - Connection: 24V DC, duty cycle 100%. - Power supply connection from a single source! - M6/M8 mounting threads on the back. - Cable clamps designed as screws with nuts. - Types 81303 and 81304 suitable for oxidized or uneven surfaces due to large pole distances. - Holding surface can be processed up to a maximum depth of 2.5mm. - CE marking, VDE tested. Protection: IP 53 *For St 37/S235JR(H), air gap 0mm and minimum material thickness. **Other dimensions available, please inquire.

...Direct-acting presses - Knee lever presses - Pneumatic presses with process monitoring - Forces up to 60 kN - Type-tested manual workstations - Components for integration into special machines The SCHMIDT® PneumaticPress, powered by compressed air, is a modular system that optimally meets the requirements in the fields of forming, joining, and assembly with a pressing force range of 1.6 - 60...

...Turret punch with electric servomotor drive Machine type: Punching machines The launch of the new AE-NT punch confirms Amada's status as a market leader. It is complete, saves energy through the AC Servo Drive (dual servomotor), and its turret offers the latest features in sheet punching. ECO energy-saving system Punching force up to 20Tn User-friendly touch monitor Large capacity turret – 51 stations Reliable processing (operation) with air jet and vacuum systems ** Request a quote **...

... of rotor weights can also be installed in the RüMoo type RM compressed air vibrator. As a result, the centrifugal force can be increased by a factor of approx. 1.8 in the same housing, for example, by changing the rotor weight. A cost-effective alternative to performance variability is therefore given. The rapid start-up of the RüMoo add-on vibrator runs through the natural frequency of the respective component in a matter of seconds, a component is dynamically stressed as little as possible. With the RüMoo type RM60, concrete compaction depths of up to 80 cm and more...

...Vane Anemometer with a fixed 30 mm vane Measurement of air velocity and air temperature Calculates wind chill and Beaufort wind force...

...The rollers are used to laminate thin films onto other surfaces such as glass, metal, ceramics, plastic, etc. The high hardness of the rollers ensures even pressure to suppress air bubbles. The elastomer rollers do not have their own adhesive force, compared to the other DCR hand rollers used for contact surface cleaning, as this would be counterproductive for the purpose of laminating.

...Heavy Duty Limit Valve, 2-Way, Normally-Closed Notes for convenience in porting away exhaust air or attaching muffler. It should not be restricted exhaust port is not used on 2- ways. See Catalog: Page 127 Additional Information Air Flow 19scfm @ 100psig Force 3 inches/ lbs. Max PSI 300 psig Medium Air Ports 1/8" NPT Stem Travel 50 degrees Temperature Range 32 to 230 F Travel Arc 0-23 degrees OFF 23-50 degrees ON...

...Keder made from 2200 dtex material is used in products where high load and wear resistance are required. The finely woven structure distributes the force across multiple wires. As a result, the wear per wire is reduced. Some examples include: - Awnings - Profile tents - Gutters - Pagoda tents - Large tents - Storage tents - Air treatment The standard is to supply this Keder in diameters of 5 - 13 mm, in the following colors: - White - White/opaque - Gray/opaque - Black/opaque...

...The Eclore origami actuator, designed as a single piece using our folding machines, expands and contracts simply through the force of compressed air.

... of shapes and sizes and can be used in many different applications. A pneumatic actuator is a mechanical device used to control and move a mechanical component or system using compressed gas, typically compressed air. It converts energy from compressed gas into mechanical motion, allowing it to perform a variety of tasks such as opening and closing valves, moving mechanical parts, or providing linear or rotary motion for a wide variety of industrial, commercial, and consumer applications. Pneumatic actuators are often used where precise control, high force, and fast response are required.

... - Pressure dependency testing - Temperature behavior investigation - Repeatability measurement - Measurement capability determination (cgm, cgk) ...with the measured variables: - Flow - Pressure - Temperature - Humidity - Current - Voltage - Force - Distance - Medium: Air – other gases upon request!

... cut-off:: potential-free changeover contact, max. 250V AC 5A Control room heating:: 8 Nm for E 50, 4 Nm for E 65, 20 Nm for E 110, 35 Nm for E 160, 50 Nm for E 210 Potentiometer:: 1000 Ω Current feedback:: 4-20mA, supply max. 30V DC Thermal switch:: integrated Actuation force handwheel:: 4 Nm for E 65, 20 Nm for E 110, 35 Nm for E 160, 50 Nm for E 210 Supply voltage:: from 110V AC/1~ to 480V AC/3~...

...Features Extra fine and clear non-turbulent solid stream nozzles with high impact cutting force. Applications Trimming: Paper making Cutting: Timber, food Others: Cleaning of precision machine parts, injection of chemicals, deburring, foaming of beer (jet foamer) Pipe conn. size:R 3/8" Spray angle:- Mean droplet diameter:- Strainer:Included or available Standard pressure:1 MPa (ca. 10 bar) Spray capacity:0.016–3.03 ℓ/min Air Consumption:- Free passage diameter:0.1–1.5 mm...

...Large semi-automatic tent for a family or friendly company. Two independent rooms with a spacious vestibule that allows you to store things or get together with the whole company. To accommodate a large number of people under one roof, we have developed a special convection-type flow ventilation that provides the interior with fresh air. Wind resistance: Medium. Fresh wind 9-11 m / s (30-40 km / h). A properly installed tent with fixed guy wires, stretched by pegs, with closed windows and an entrance is suitable for use with a wind force of 5, i.e. 40 km / h...

... the best closed-loop hydraulic technology without air. Complete with speed regulators, force controls, and valves for selecting reversible, irreversible, or mixed modes. In the 24Vdc version, it is possible to adjust the anti-crushing sensitivity for greater safety of the system as required by the EN12453 standard. European profile unlocking key. FLOOR is even more robust in the new version with openings up to 150° and 180°.