horizontal pumps

...without shaft seal streamlined housing made of PP or ETFE volume flow of MA pump type 2 is up to 80 l/min, of MA pump type 3 up to 100 l/min discharge head of MA pump type 2 is up to 8m.Wg, of MA pump type 3 up to 15m.Wg horizontal single-stage monoblock design Material:PP (glass-fibre reinforced) / ETFE (carbon-fibre reinforced) Rated speed in [rpm] at 50Hz /60Hz:3000/3600 Suction port:filetage...

...Centrifugal pumps have well-known advantages such as uniform pumping without surges, the ability to create high pressures at low pump rate in multi-stage designs, long service life and others. Advantages: the fluid can be taken in at a point lower than the axis of the inlet suction pipe without using a pre-installed vacuum pump. - Purpose: transit of corrosive, toxic, explosive and...

...The ECO SNM close coupled, end suction, single stage horizontal centrifugal pump is standardised to DIN 24255 / EN 733 and can be used for a vast range of applications in the industrial and marine markets. It is designed to pump low viscosity clean or slightly contaminated fluids without the presence of solid or fibrous particles. If required, this pump is available in a vertical version known...

...Max viscosity 500 cSt (mm2/s) Rotation speed 1400 rpm Power 0.75 (JEV21), 2 (JEV23) Current 2.2 (JEV21), 5 (JEV23) Suction and discharge 1" Max HMT 60 meters (JEV21), 50 meters (JEV23) Voltage 230/400 Volts three-phase Built-in and adjustable bypass Transfer 10 to 500 mm2/s Positioning horizontal or vertical Max liquid temperature to pump 60°C Ambient working temperature 10° to 60°C Specifications and advantages Gear pump FLUID: Diesel, Oil TECHNOLOGY: Gear ATEX: No PUMP TYPE: Equipped FLOW RATE: 1.5 m3/h max - 3 m3/h max ORIFICE: 1" BODY: Cast iron MECHANISM: Delrin...

...Multistage pumps made entirely of stainless steel, particularly suitable for domestic, agricultural, and industrial uses. All parts in contact with the pumped liquid are made of Aisi 304 stainless steel to ensure maximum hygiene and resistance to corrosion. Versions: EHX3 – EHX5 – EHX9 – EHX15 – EHX20 Flow rates: 0 – 500 lt/min Head: 0 – 100 m Power: 0.33 – 5.5 kW Pump body, impellers, diffusers...

...In our range of Surface Pumps, you can find various types of electric pumps with excellent performance, including volumetric, self-priming, centrifugal, horizontal multi-stage, and submersible drainage pumps. These types of pumps are used in a wide variety of civil and industrial applications, including irrigation, agriculture, potable water supply, lifting and distribution in domestic installations, drainage, among others.

... industrial use as well as for the pharmaceutical, food, and cosmetics (hygiene) sectors. All VISCOPOWER eccentric screw pumps are usable both mobile and stationary, consist of only a few components, and are easy and quick to disassemble. Our eccentric screw pumps are available for direct installation in the medium or outside the container, versions with explosion protection, 3A certification, as well as...

... temperature: +40℃ Maximum system pressure: 10 bar Protection level: IP44 Mains connection: 230V; 50Hz Insulation class: F Characteristic features: Flanged (PN6 and PN10 compatible) Installation: Motor shaft should be positioned in horizontal direction FEATURES and BENEFITS Class “A” energy efficiency – lowest energy consumption Permanent magnet motor – intelligent frequency change control Model Name:Aldea GPA 80-15F Strength:960 W Max. Flow:57 m³/s Max. Height:15 m Ø Connection Diameter:DN 80 Pipe Range:360 mm Energy Efficiency Index (EEI):≤0.23...

...Horizontal multistage electric pumps with stainless steel impellers. Mainly used in pressurization systems, irrigation, washing systems, and handling clean water. Outer casing and motor shaft made of AISI 304 stainless steel. Mechanical seal in ceramic graphite. Closed self-ventilated motor. Insulation class F. Single-phase power supply 230V 50Hz, with permanently installed capacitor and built-in...

... you to be able to produce automatically and continuously with out any touch. Tunnel type spray surface cleaning lines consist of parts like spray nozzles, heat exchangers, dosing pumps and ventilating systems. In our spray lines, the AISI 304 – AISI 316 stainless sheets of steel and polypropylene are used. According to needs of our esteemed customers, horizontal belt type conveyor, compact type, and rotary table type automatic plc controlled washing machines can be produced by us. Some chemicals which are used for surface cleaning must be applied hot. Due to this situation...

...The horizontal pump set is suitable for emptying highly aggressive, aqueous to slightly viscous media from IBC containers or tanks and is the perfect alternative to vertical drum pumps. Ideal for extracting concentrated acids and alkalis. * optionally with leakage detection (Safety Box) * horizontal connection at the bottom outlet of the container Features & Benefits * available with electric...

... back to the filter. The SBC pumps are capable of handling chip to coolant ratios of up to 1.5% by weight. Volumetric delivery: up to 1400 l/min Delivery head: up to 34 m Media:for coolant,emulsions, oils (on request) Operation:electric Priming:semi-submersible Type:centrifugal Domain:industrial,for machine tools,for the metallurgical industry Other characteristics:compact,single-stage,horizontal mount,close-coupled,in-line,cutter,for emulsions,cutting fluid...

Since its founding in 1983 by Dipl.-Ing. Heinz Langer, our family-owned business, now in its second generation, has developed into one of the leading manufacturers of highly corrosion-resistant pumps. Our company primarily focuses on the development, design, and manufacturing of PTFE/PFA-lined chemical pumps with magnetic drive. Through this specialization, we have established ourselves in the gl...

...The 5000-ton horizontal bitumen tank is one of the largest specialty storing containers designed to hold enormous volumes of bituminous, thick, sticky material refined from raw crude oil. These are laid horizontally to facilitate the storing, heating, and transferring of bitumen. They are strong; they insulate the internally stored bitumen; their construction is durable enough, made from high...

...Submersible pump for cooling water 4.0KW Horizontal installation 20 liters/min, 135 meters water column 220V/50Hz 15.6A, 380V/50Hz 8.6A, Outlet connection PS 3/4" Inlet PS 1 1/2" ITEM NUMBER: 5194610 MANUFACTURER PART NO: ACP-4000HMFD Outlet connection: PS 3/4" Inlet: PS 1 1/2"...

...For clayey materials, as an alternative or in addition to the disruptor, it is possible to consider a system of high pressure water jets called the jet-ring system. This system consists of a ring, applied in correspondence with the filter of the dredging unit and a centrifugal pump for feeding the ring with a horizontal axis (available in electric and hydraulic version).

... Protective button guard Dual calculator for working hours and energy consumption of the wire container device Washable air filter Usable with air pumps of 100 mm, 50 mm, 38 mm diameter Technical details: Airflow without support plate: 1,250 m³/h Max air pressure: 1,050 Pa Ventilation levels: none Connection voltage: 230 V / 50 Hz Power: 170 W Acoustic values (distance 1.5 m): 73 dB(A) Installation: for building Configuration: radial...

...At CIMAT, we offer conventional horizontal balancing machines on a bed for rotors of pumps of different size. The greatest advantage of these machines is their versatile application. Main features universally applicable, custom design for every customer, permanent calibration and rotor specific calibration as standard, intuitive and easy to operate software, latest measuring and control unit...

...Caprari pumps provide solutions for water extraction, wastewater pumping, and drainage, as well as water supply and distribution in civil, industrial, and commercial sectors. Well Pumps Borehole Shaft Pumps Dry-installed Pumps Multistage Horizontal High-Pressure Pumps Multistage Horizontal Centrifugal Pumps Multistage Vertical Pumps Single-stage and Multistage Centrifugal Pumps...

...Hemogum has its own recipes for mixtures with special requirements in the field of mining such as: mills with balls, shrink sleepers, rubber rotatory and stationary parts of horizontal and vertical pumps for handling of hydro mixtures with high resistance to abrasion. With Hemogum equipment we produce profiles of different diameters made from material of diverse quality, that attend requirements...

...Horizontal Multicellular Pump Flow H Max kW 1 to 7.2 5 to 56 0.33 to 1.10 mc/h m kW Execution Horizontal multicellular pumps. Pump body made of chrome-nickel stainless steel in a single piece, open on one side with a front suction inlet above the pump shaft and a radial discharge outlet at the top. Uses Water supply. For domestic applications, gardening, and irrigation.

...Jet - Self-Priming Surface Pump - PUMPS AND LIFTING STATIONS Model: JET In stock: 5 Products Liquid temperature: from 0 °C to + 35 °C. Maximum suction depth: 8 m. Maximum ambient temperature: + 40 °C. Maximum operating pressure: 8 bars. Installation: to be installed in a horizontal position.

... materials, such as sugar, cream, instant coffee powder or frying powder, etc. can also be fed into the machine via nozzles or via liquid pumps for liquid mixing. Options for combined equipment are pumping systems, weighbridge or powder feeding stations.

... Gravity:: up to 1.8 Maximum Working Pressure:: 175 psi (12 bar) Type:: Heavy Duty Sealless Mag Drive Configuration:: Horizontal ANSI dimensional AA Construction Materials:: ETFE-lined ductile iron O-ring Materials:: FKM, EPDM, Simriz®, Kalrez®, or Aflas® Bushing Materials:: Carbon, SiC, or Dri-Coat SiC Shaft Materials:: SiC or Dri-Coat SiC...

...KYK H model hot oil boilers are produced as horizontal type with spiral tubes, suitable for use with liquid and gas fuels. The system can be delivered as a package including all boiler room equipment and accessories such as circulation pumps, reserve and expansion tanks, deaerator, and chimney. KYK H model is a spiral tube, horizontal type heater, suitable to use with oil and gas fuel types...

...Horizontal, single-stage spiral casing pumps with dimensions and nominal performances according to DIN 24255 / EN 733, plus 6 additional sizes. Application Spiral casing pumps of the ZLK series according to DIN 24255 / EN 733 and ISO 9908 are used when it is necessary to pump clean or slightly contaminated liquids that do not contain solid components without any issues. They are utilized in...

... volume flows without cavitation in the pump. Special Features: Flow rate based on 100% volumetric efficiency and 20°C ambient temperature Min. inlet pressure dependent on fluid Speed range 0-100% depending on rod force dynamically balanced crankshaft Gearbox with external forced lubrication and oil cooling External gear ratios on request e.g. i = 4.76; 5.72; 6.3 Also available to API 674 Horizontal operation Special fluids such as seawater, glycol, methanol, oils, etc. on request. Pressure:max. 3500 bar Flow:max. 4677 l/min Power input:max. 1500 kW Weight:7500 kg...

...Hydraulic workshop press with a pressure force of 30 to 1,000 tons. Technical specifications: - 400 mm double-acting stroke - movable cylinder - Pressure gauge with manometer - 2 operating modes: electric operation or manual operation - 2 independent hydraulic pumps - Control unit with motor protection monitoring and safety features - Adjustable passage height - Pull chains for easy adjustment...

... (These values may vary depending on the material used, the pumping height, the consistency of the pumped material, the type of pump, rotor and stator.) Water pump 50 liters/min - 0.75kW Transport Distance Horizontal * 40 meters (Standard – if needed this will be long - option) Transport Distance Vertical * 30 meters (Standard – if needed this will be long - option) Reservoir Volume 130 liters Maximum Weight 285 kg ...

...The horizontal monobloc stainless steel centrifugal pumps are either derived from the "NI" range, which stands for "Normalized Stainless Steel," also known as PROCESS pumps, or designed to provide a technical and economical alternative to standardized pumps. Made from stainless steel (316, 316L, 904L...), they meet the most complex requirements thanks to their reliability and performance. Self-priming horizontal monobloc stainless steel pump with mechanical seal and priming tank Maximum flow rate 25 m3/h and maximum head 30 mcl...