hardness tests

...-resolution USB camera, and LED lighting. The very rigid structure of the frame eliminates the effects of sagging during testing. Measurements are automatically taken across all hardness ranges, and if necessary, manual measurement can be performed. Results are displayed on a 12” screen and can be printed or exported to a PC. The correction offset for tests on cylindrical parts is automatic. Reference:100121000...

...In the laboratory of Istanbul Dokum, for all productions, chemical analysis, mechanical yield – tensile – elongation tests, and when required hardness tests, UT, MT and MPI tests are provided.

...We maintain quality assurance systems, such as iso 9001: 2009, iso 18001-2004 and iso 14001-2005. KIGEMA possesses a laboratory allowing testing the mechanical properties of products like hardness, elongation, and micrometer. KIGEMA also conducts penetration and ultrasonic tests and issues certificates of conformity with EN 10204-2.2, 2.3, 3.1B. Additionally, the company has an air-conditioned...

... sorting by defects are conducted. This guarantees 100 percent quality – with a cycle time of 3 seconds. Application area: Turned parts for automotive suppliers, special customer parts, general measurement tasks Tests: Hardness / crack testing, leak testing, etc. Sorting system: Automatic sorting of parts into 9 categories Cycle time: 3 sec.

...This Water Quality Test Kit is ideal to test the levels of 12 different elements, allowing you to identify potential issues in your water quality so you know how to correctly treat your water. This kit tests for: coliform bacteria, nitrate, nitrite, hydrogen sulfide, total hardness, total alkalinity, total chlorine, free chlorine, copper, sulfate, iron & pH. Suitable for: fresh and potable water samples, including water from taps, wells, springs, boreholes, ponds, rain water as well as water stored in tanks.

... the electronic unit are mounted outside the conditioning chamber. Modular, digital hardness testing system in conjunction with a conditioning chamber for individual or series testing. Electronic unit Through the electronic unit, various parameters such as dwell time, heating time, and profiles for series testing can be set. Series tests are automatically conducted after the parameters are entered. Our service offerings: - Calibration - Reminder service - Loan equipment - Contract measurement - Maintenance contract - Training...

...As mechanical tests, we offer hardness tests, tensile and compressive tests, roughness measurements, adhesion strength measurements, grid cuts, and more.

...Hardness tests with a standard of 3 impressions per test on the universal hardness tester according to DIN EN ISO 6505, 6506, 6507 (Brinell, Rockwell, Vickers)...

...Our modern inspection and testing equipment allows us to inspect the cast products completely according to your requirements before we deliver them to you. We offer: Inspection of materials (both chemically and mechanically) Delivery under certificate Measurements reports Wall thickness measurement Radiography Penetrant inspection Pressure and leakage tests Endoscopic Ultrasonic Microscopic Hardness measurement 3D scan & 3D-cad comparison...

...For trade, flesh firmness is an important quality criterion. The harvest date of the fruits is determined by the firmness measurement, taking into account the transport duration to the destination and the storage duration. Scope of application: Firmness tests on: Peaches, apricots, plums, damsons, cherries, tomatoes, strawberries, apples, avocados, kohlrabi, carrots, cucumbers, radishes, etc.

...The most important methods for determining the hardness of metals are the testing procedures according to Brinell (HB), Vickers (HV), and Rockwell (HRC). Hardness tests are used to assess the wear behavior or compressive strength of materials. to verify the effectiveness of material treatment processes that could or should result in a change in hardness, such as cold forming, heat treatments...

...The DuraVision G5 series hardness testers cover an unprecedented load range of 0.3 to 250 kg or 3 to 3,000 kg, allowing for a wide variety of testing methods: Brinell, Vickers, Rockwell according to EN ISO and ASTM, as well as carbon tests (Knoop and plastic tests available on models within the lower standard load range). Thanks to its robust construction, the DuraVision G5 hardness tester is particularly suitable for use in a challenging production environment.

... testing, roller for tests according to ASTM F1566) The adjustable testing table frame guarantees a high flexibility for specimens of different sizes Flexible test parameter entry (e.g. number of cycles, test load) Automatic shutdown of the machine when the pre-set number of cycles is reached Exensive testing and evaluation software Alternative: Single test stand for durability tests on mattresses, spring cores and (box spring) beds according to EN 1957/ASTM F1566 Single test stand for the hardness measurement on mattresses, spring cores and (box spring) beds according to EN 1957/ASTM F1566...

...We provide stock of hot-rolled seamless tubes up to a diameter of Ø914 with a thickness of 100 millimeters. These tubes are available in single or double standard lengths. We can also cut the tubes according to your requirements. To ensure the best quality of service, our tubes are selected to meet your production needs: Resilience tests / Ultrasonic inspections / Hardness / Non-destructive testing... Standard EN 10210: Quality S355J2H / S355J2+N Standard EN 10297: Quality E355+AR / E355+N Standard EN 10216: Quality P235 TR1 / P235 TR2 / P355N...

...The demands on cutting discs in cast processing are enormous. Tyrolit offers special cutting discs with high service lives and an attractive price-performance ratio, based on years of experience and comprehensive safety tests. Tyrolit cutting discs for cast materials combine a new bonding system with high-quality zirconia corundum and are available in various hardness grades. In addition to...

...Model: PDT 101 ⦁ The results of the tests are known as the Pellet Durability Index, a standard quality measure (P.D.I.). ⦁ The pellet testing device is suitable for animal feed pellet testing. ⦁ The device is PLC controlled and has 4 timers (30-60-90-120 seconds) that can set the ideal time for testing. ⦁ The device is used to calculate the pellet durability index. ⦁ Only a 100 g sample is used...

...Recommended for medium-sized and irregularly shaped samples, AX/PD is the new digital tool from Axiotek designed to perform Rockwell, Brinell, and Vickers tests in accordance with the relevant ISO and ASTM standards. The "AX 4.PD" version features a convenient handwheel and a wide, sturdy support base; these two elements combined enhance the tool's operability and can support even the most...

...The ZHV30 Vickers low-load durometer is designed for conducting Vickers and Knoop hardness tests in accordance with ISO 6507, ISO 4545, and ASTM E 384 standards, within a testing force range of HV0.2 to HV30. For more complex or automated applications, there are PC-controlled versions that integrate high-definition (HD) software, functioning as either semi-automatic or fully automatic systems. Type: Vickers Mounting: tabletop Other features: semi-automatic Uses: for any type of material...

...Structure replicas ASTM E1351. Thanks to its diamond tip and ultrasonic analysis, the MIC 10 allows for quick and precise hardness measurement.

... lubricating oil can be regularly and directly checked on-site, and the essential parameters can be determined. Features: Measurable Parameters • Water-in-oil • Freshwater hardness • Chloride content • pH value • Antifreeze concentration • Corrosion inhibitor • Oil viscosity • Spot test Benefits: • Complete set of equipment for evaluating engine oil and coolant • Compact size, convenient for transport • On-site, quick and accurate assessment of the condition of engine oil and coolant...

... to determine at what force the scratch tool penetrates the plastic. Pencil Hardness Test - Scratch Hardness Test according to Wollff-Wilborn A quick and simple test where a pencil is drawn across a component at a 45° angle with a specific force. Cross-Cut Test Determination of the adhesion of one or more layers of coatings. Usually combined with environmental simulation tests. Honda Hot-Scratch Test Special examination of the adhesion strength of a coating on plastic parts.

... experience to guarantee skilled support in every phase of business. We take pride in long-standing relationship with our customers and our manufacturers. In-house testing facilities We perform all mechanical and chemical tests according to the applicable standards such as: mechanical Tensile tests, hardness and impact tests (destructive testing), product analysis, PMI, UT, HIC (Non-destructive testing) or any other customer requirement.

...sandblasted and primer coated High tensile strength plates according to DIN standards can be produced with hardness at - 50 degrees and yield strength at high temperatures, whichever is preferred in other standards.

...Straps and all other components undergo strict analysis for chemical composition, tensile strength, hardness and microstructure. All components parts undergo rigorous inspection and measurement controls before entering the production areas. Diaphragm springs - Produced utilizing Japanese manufactured automatic heat treatment plant and computer tested against OE load specifications before assembly. Tests including clamp load, release load, pressure plate lift, finger height, stress and fatigue testing using the latest sophisticated test and inspection facilities.

...By the end of the fourth quarter of 2018, the company continued its R&D efforts in-house, highlighting its commitment to quality control by subjecting its products to tests such as chemical analysis and hardness metallography in a laboratory setting. It also expanded its product range to better serve its customers, aiming to increase capacity to up to 2000 tons.

...Pressure Testing X-ray and Fluoroscopy with state-of-the-art X-RAY technology Wall thickness measurement using ultrasound Crack Testing Chemical Analyses Tensile Samples and Hardness Tests Component Samples 3D Dimensional Checks...

...We conduct hardness testing (HBW) in-house. This primarily concerns the assessment of casting assortments, where an improvement in mechanical properties is desired through a microstructure change during pearlitizing, ferritizing, or FP annealing. Further material tests, however, are outsourced to accredited, local testing laboratories that offer both non-destructive and destructive testing...

...Quality made by Siempelkamp Based on decades of experience and using state-of-the-art technology, we oer individual, comprehensive testing of your components. Key features Advantages highly-qualied sta numerous certications (see download area) individual pressure and leakage tests non-destructive testing methods (VT, PT, MT, UT and test station for RT) Innovative 3D laser and video scan measurement techniques decades of experience mobile hardness testing greatest accuracy state-of-the-art technology...

... products withstand the highest loads in use Material samples are produced in accordance with standards and reproducibly by trained specialists using CNC-controlled milling and turning machines, and are tested and evaluated promptly and flexibly. To determine reference values, heat treatment of the samples can be performed in our laboratory prior to testing. This includes, for example: - determining the hardness jump behavior - conducting blind hardness tests...

...Indentation Testing and Hardness Testing in a Machine The innovative hardness and strength testing machine i3D R/BVR combines classical hardness testing with the latest findings from materials testing. Based on the indentation method, flow curves and thus the comparative values for tensile tests are determined: - Rp0.2 – Yield Strength - Tensile Strength Rm The classical hardness testing...