ferrite

...This strontium ferrite magnetic tape is available in many different colors in rolls of 1 meter. It can be cut to the desired length with scissors and labeled.

...Strontium Dry Pressing Ferrite Magnetic compound are suitable for producing magnets by dry pressing. Strontium ferrite material features better magnetic property than barium ferrite material in the area of remanence induction intensity, coercivity and magnetic hysteresis loss. Strontium compound have been added proper quantity of binders and lubricants and pass through 120 mesh sieve,so as...

...Ferrite rings for quick assembly Motor rated power up to 45 kW Reduction of leakage currents Reduction of interference emissions Compact dimensions Easy installation High permeability Inductance freely selectable...

...Decoration magnets, hard ferrite, with hook, white Article number:DEKA-34 L mm:34 B mm:29 H mm:35 Force* N:100 Weight g:35...

...Steel body. Hard ferrite magnetic core. Flat magnets with threading, shielded system. On models D 80, D 100, and D 125, micro-cracks on the contact surface of the magnetic material are unavoidable due to the manufacturing process. They do not affect the proper functioning of the magnets. Reference: 09065 Finish: Zinc-plated body Temperature range: 200 °C max Drawing indication: Contact surface...

... materials of carbon products: Materials used for rechargeable battery electrodes, condensers and resistance material and insulating electronics / cokes / graphite / carbon black / carbon fiber / nano carbon, etc. Metal powder: Materials used for battery electrodes, thin film materials such as copper powder or ITO powder, for circuit board materials, for example conductive paste and electro conductive paint. Others: Thermoplastic powder, Printer toner, Magnetic material such as ferrite, food material, pharmaceutical related and automobile parts.

...Ferrite in various designs Ferrite in many shapes and variants...

...Flat gripper with a hard ferrite magnet in a steel pot. The housing increases the adhesive force of the permanent magnet. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The flat gripper has a 10 mm threaded socket with an internal thread. It is characterized by a force of 125 N. The diameter is 40 mm, the total height is 18 mm. Design:with threaded bush  Material:hard ferrite  Force:125 N Diameter:40 mm Height:8 mm Total height:18 mm Diameter threaded bush:10 mm Thread:M5  Weight:59 g Temperature:200 °C Housing:galvanized ...

...Cable assembly and crimping applications for Dsub, using a ferrite core...

LEAR (Laboratorio Elettronico di Automazioni e Regolazioni) in Turin focuses on the design and manufacturing of electrical equipment based on specific customer requirements. The core of the production activity has always been centered on the design and construction of windings (transformers, inductors of various powers and frequencies for specific industrial uses, etc.), made according to the requ...

...Ferrite Magnet...

... product, such as containers made of the material 1.4404 (316L) or 1.4435 (316L defined delta ferrite content) Tanks and pipes cooled, heated and/or insulated ("chloride-free") Pipe dimensions according to DIN 11866 Aseptic pipe connections as clamp connections according to DIN 32676 Easy assembly and disassembly...

... ferrite material mixed with a thermoplastic binder and magnetised on one side for the maximum magnetic performance. Suitable for both roll-to-roll and flat bed printing processes with a choice of white matt, gloss vinyl or PET finish. Adhesive-backed variants are available for bonding directly to various surfaces.

...Product Features: • High saturation flux density ferrite rods. • 1" long leads, tinned to within 1/8" of body. • Ideal for filtering or energy storage inductors. • Inductance measured at @ 1 Khz. with 0 amps. D.C. current, typical inductance change is less than 5% @ twice rated current. • Ambient temperature range -60C to +85C.

... well as the volume of waste for disposal. WIWOX PeenPearl® produces extremely smooth, shiny surfaces, ideal for the visual appearance of high-quality components. By the uniform compaction can functional Surfaces to be improved in their properties (Shot-Peening effect). The contained iron oxide (TiO₂) is completely crystalline bound. Ferrite residues on Surfaces are therefore excluded. For the processing of stainless steels and nonferrous metals opened WIWOX PeenPearl® blasting abrasives new perspectives.

...For transport, storage, weighing, and processes such as mixing, we offer IBCs or containers and other vessels in any size. Product-contacting parts are made from stainless steel (1.4404/AISI 316L). Through our own production at BSW Anlagenbau, with the capability for in-house material analysis, we can document and comply with requirements for δ-ferrite content. The containers are designed...

...The EFD series (Economic Flat Design) is suitable for applications where a particularly flat transformer design is required. The ferrite cores differ from the classic E series by having a flattened, lower central leg. This allows the winding structure to be embedded within the coil body and the ferrite core halves. All components of the EFD series (EFD10, EFD12, EFD15, EFD20, EFD25, and EFD30) are available from us as surface mountable for SMD technology. Upon request, we can supply EFD components up to size EFD20 on delivery spools.

...Fully automated winding centers in fine and back lacquer wire technology make us the right partner for your comprehensive tasks. Our spool pre-tinning is done with lead-free solder (RoHS). Single-chamber and multi-chamber coils can also be realized at PRÜFREX using two-wire winding technology. For specific requirements regarding magnetic flux, we apply wire of varying thicknesses to the spool body. Two different wire thicknesses ranging from 0.045 to 0.71 millimeters on spool bodies with press-fit ferrite or metal cores.

...THE SOLUTION FOR MANY APPLICATIONS Ferrite magnets are commonly used and represent the classic magnets for many. They consist of approximately 80% iron oxide and about 20% barium or strontium ferrite. Since they are available in large quantities as raw materials, these magnets are very cost-effective. The shaping of hard ferrite magnets is done through pressing.

... is additionally applied in an axial, radial, diametrical, or multipolar direction. This anisotropy allows for higher magnetic values to be achieved, although they do not reach the level of sintered anisotropic hard ferrite magnets. Furthermore, the ratios of ferrite content to plastic content can also influence the elasticity and strength of the magnet.

...Ferrites from Blinzinger – E, EC, EFD, ELP/ILP, EP, ER, ETD, EVD, P, PM, PQ, RM, I and U cores, URR, ring cores, double hole cores, shell cores, ferrite blocks, ferrite plates, custom ferrites...

...Hard ferrite magnets are the most commonly used materials worldwide.

...Permanent magnetic plate catchers in various sizes and optionally made with ferrite magnets or neodymium magnets. Permanent magnetic separation systems are used to separate iron parts from a wide variety of media. This can involve both solid materials and liquid media. A precise analysis of the operating conditions is crucial in determining which system can be used where. Dear Sir or Madam, Are...

...The ferrite content measuring device FERRITE-CHECK 110 with integrated probe for measuring the ferrite content in austenitic and duplex steels according to the Basel standard DIN EN ISO 8249, magnetic inductive method.

ALUMINIUM FERRI has concentrated its skills around three areas of excellence since 1938: machining, polishing and anodizing. The reputation of ALUMINIUM FERRI is built on its unequalled know-how in making decorative parts, be they polished, brushed, sanded, matt, satin, shiny, or coloured in shades such as gold, copper, brown-olive, nickel, grey, black, or shotgun. ALUMINIUM FERRI uses its experti...

...Cost effective fluid clarification for removing ferrous material. Remove ferrous material, including sludge and chips, from both water soluble and neat oils with high intensity ferrite or rare earth magnets. Typical applications include centerless and heavy stock removal grinding machines, honing, and gear cutting machinery. PRAB’s line of magnetic separators employ high-intensity ferrite or rare...

...Reliability and security are at the heart of our business. Your production and customer satisfaction depend on it, and we ensure this through our quality management system. - Measurement and documentation of ferrite content as requested to assess product properties, including at high temperatures - Thickness measurement by ultrasound at any point of the tube - Anti-mixing control - Roughness control on polished products Any questions? Our team is at your disposal to answer them.

Würth Elektronik Circuit Board Technology specializes in the production of printed circuit boards for small to medium-sized orders in all common surfaces and currently employs over 1,000 staff, the vast majority of whom work in the three German production facilities. Every day, more than 120 new printed circuit board designs pass through our manufacturing. This is impressive evidence of our high ...

...Magnets are flexible, easily removable, force-locking fastening elements. They are used, for example, in flaps as a locking mechanism to prevent accidental opening. They find application in mechanical engineering and plant construction. Flat grippers with threads, shielded system. The magnets can be mounted by pressing in, screwing in, or gluing. Material: Housing stainless steel 1.4016. Thread stainless steel 1.4305. Magnet core hard ferrite. Flat grippers with threads, shielded system. The magnets can be mounted by pressing in, screwing in, or gluing. Material: Hard ferrite, stainless steel...

Magna-C GmbH is a mail order company for magnetic products of all kinds. We offer a wide range of products with high versatility. We, Magna-C GmbH, have been in the market for magnetic products of all kinds for over 40 years. We provide a very broad assortment with expert advice from our in-house sales engineers. We regularly expand our range and adapt to the needs of our customers. Due to our go...