adjusting device

...The VS100 screw module, developed by CDA, is a semi-automatic and independent device designed for screwing caps onto a variety of products. Equipped with an integrated screwdriver, the VS100 can efficiently secure caps onto containers. It is easy to handle, features two-hand control, and allows for adjusting the screwing time directly on the screwdriver head. This semi-automatic tabletop...

... it to the desired location by pushing it, without applying force or lifting it. Effective in a Wide Area The CRM 5KW heater can comfortably and quickly heat an area of 40–100 square meters during operation. More information is available. Thermostat Temperature Setting With the thermostat temperature setting, you can maintain the ambient temperature in balance by adjusting it to your desired temperature at any time. Fast and Powerful Heating Width: 30 cm Height: 44 cm Depth: 35 cm Weight: 12 kg Voltage Frequency: 380 V – 50 Hz...

...Manual stapler, extremely compact and light, suitable for stitching cardboard boxes. Body with a special aluminum alloy and depth/dot shape adjustment. Each model can use two measures of 15 and 19 mm points by simply turning the adjusting device. Staples width:35 mm Charger capacity:100 staples Usable staples:35/15-35/19 mm Weight:Kg. 1,200...

... randomly adjusting the device between the maximum and minimum settings, this comfort dehumidifier allows you to directly preset the desired humidity level. The built-in hygrostat automatically regulates the power of the compressor and the two-speed fan according to the defined humidity level. The temperature as well as the current humidity level can also be read at any time via the control panel of the TTK 90 E. Technology: refrigerant Mobility: mobile Fluid: air Other features: not specified...

... adjusting damper is also insulated (depending on the control mechanism). The servomotor is installed on the control unit casing so as to allow for thermal insulation of the system. The regulator is also available in the version with preinstalled 50 mm insulation and a galvanised steel shield. The measuring system based on aluminum impact pressure tubes and pressure relieve stub pipes ensures reliable measuring of the air flow. Sensor, control unit and servomotor are integrated in one device.

...) or similar device to establish a Tightening Assurance System using assembly line interlock controls. Torque setting is easy to adjust by knob and scale. The ratchet head has 24 teeth with a 15 degree operating range, allowing for use in space-limited working conditions. A clear “click” sound signals tightening completion upon reaching the set torque. Metal handle version (-MH) especially suitable for use in greasy conditions (oil, chemicals, etc.) such as garage work. Large adjusting knob designed to enhance usability in torque setting by oily hands. [...]...

...Sealing Bar Type BS for welding and sealing bags: - Made of PE - Made of PP - Made of Soft PVC - Made of Polyamide PVC Features: Equipped with a potentiometer for adjusting the welding time and a high-quality welding wire. The models BS...C are equipped with a manual cutting knife. The models BS...CF are equipped with a round welding wire cutter (welding and cutting).

...This exceptionally versatile tool for post-molding assemblies is perfectly suited for all levels of production: from a single unit for prototype assembly to multiple units on an assembly line. The SPIROL® CM model manual compression limiter installation machine easily adapts to rapid changes by simply: 1. Replacing the device 2. Swapping the insertion punch/pusher tip 3. Adjusting the...

... located in the upper part of the cooling chamber. When the maximum filling level in the cooler is reached, the sensor activates the discharge grate, which cyclically discharges the cooled product into the discharge hopper until the rated minimum level is reached. The minimum and maximum fill levels in the cooler chamber is regulated by manually adjusting the position of the fill sensors. In the lower...

... avoid shake when printing. 5. Registration with servo motor, lateral ball screw rod adjusting. 6. Rubber roller & anilox roller fast changing design. Chamber doctor blades and rubber roller are available, optional. 7. Anilox roller automatic self-wash device, much more convenient for circulation washing. 8. Automatic back to “zero” after washing printing studio. 9. Double diaphragm pump, and automatically ink recycling system, can reduce ink waste, and make ink recycling faster. Printing unit can equipped with hot air/IR dryer system.

...Reach for the stars! The innovative adjusting knob DKE01 combines a programmable electronic position indicator with a star grip or disk handwheel to offer a flexibly usable positioning unit. The indicated values can be configured application-specifically to cover the most varied areas of use with always the same basic device. Turning knob with integrated 5-digit LCD display. Digit height approx. 11,5 mm. Freely programmable via the ProToolDE programming software. Usable for length or angle measurement. Shaft accommodation: max. Ø 20 mm. Long battery life. With disk handwheel as an option.

...Checking and adjusting: function, closing pressure, flow pressure, overflow quantity, - Stationary testing facility for checking and adjusting: overall function of the gas pressure regulating device (GDR), test pressure and pre-pressure, closing pressure, flow pressure, overflow quantity, function of the safety shut-off valve (SAV), SAV zero closure test...

...This newly developed device is suitable for the same applications as the PLF 88 file. The features of this machine include its low vibration rate and the simplicity of adjusting the stroke length.

Founded in 1943 by Oskar Uhl, Walter Uhl Technical Microscopy GmbH & Co. KG has stood for the highest quality and precision in fine mechanics and optical measurement technology for over 80 years. Our company, based in 35614 Asslar, Germany, has developed into a globally leading provider in the industry through continuous development and expansion. We offer a comprehensive range of fine mechanical...

... flow meter features an adjustable needle valve. The device is approved for use in explosive atmospheres. Liquid::for liquids Technology::float Additional features::glass tube; in the measuring tube Temperature::-5°C to +100°C Operating pressure::up to 10 bar Measuring range end value liquid::0.4 to 160 l/h (water: 20°C) Measuring range end value gas::5 to 5,000 l/h (air: 20°C, 1.013 bar)...

...Adjusting the correct ceiling and floor thickness is an important and time-consuming task. With the help of this thickness device, the accuracy of this process is significantly improved, and the working time is greatly reduced. The desired thickness can be easily adjusted and monitored using the digital display, and precisely marked at the intended location with the Dremel router. These marks...

...coils, fuel pump, etc.). It allows technicians to perform factory maintenance procedures such as resetting the service light, unlocking the immobilizer device, and configuring the immobilizer/alarm device, injection adjustments (CO Trimmer), and adjusting the throttle position sensor (TPS),...

... via a sophisticated mechanism, where otherwise the clamping head engages. MANDO Adapt is attractive with extreme rigidity and precision. Without adjusting For rotating products, concentricity of 0.005 mm between chuck taper and mandrel taper can be achieved. For stationary clamping devices repeatability of 0.003 mm is possible. And best of all: This can all be accomplished without adjusting.

...Smart Ergo Level is a mobile device for measuring and adjusting steering wheels at the end of the production line. The measurement data is transmitted wirelessly to a host PC, which evaluates the signals. The display of correction instructions is provided both acoustically and visually. Ergonomics and functionality are at the core of the clearly structured design concept and the brand's design language.

...In addition to its design and color variety, PARA.MI also impresses with its practicality. The head can rotate in any direction, and the joints are self-adjusting, requiring no maintenance. - The LED module evenly mixes different colors, creating a homogeneous and powerful light with only 7 W of maximum consumption. - Special reflector developed to provide glare-free light. - Switching and dimming with memory via a simple button on the device's head. - Adjustable automatic shut-off. - Flexible fixtures to adapt to any decor. - Double adjustable arm with a wide range of motion.

... result. Integrated safety device ensuring optimal protection. What are the features of the Renz ECL 360 plastic binder? Pitch 3:1 & 2:1 Binding thickness: 1 – 34 mm Diameter of the binding rod: 6.9 – 38 mm 1/4" – 1 1/2" Minimum binding width: 10 mm Maximum binding width: 360 mm Minimum length of unbound edge: 65 mm Maximum length of unbound edge: 600 mm Electric Binding Binding thickness: 1 – 34 mm Number of booklets produced per hour: 400 booklets Number of calendars produced per hour: 250 calendars Changeover time for diameter: 20 s...

... "Companion" is one of the most affordable in the world. Equipment weight: 8.5 kg Battery life without recharging: Up to 12 hours Maximum patient weight: Up to 120 kg Maximum patient height: Up to 2 meters Adjusting the equipment for the patient: No more than 7 minutes Dimensions (folded): 550*400*350 Availability of the EMS (electrical muscle stimulation) system: Yes Ability to adapt to individual parameters of a person: Yes...

...-Link). The device can be mounted on a spindle using an optional hollow shaft without additional coupling. Nominal torque / nominal speed: 0.25 .. 1 Nm / 200 .. 50 revolutions per minute Adjustment range: 986 .. 4026 rotations Protection class: IP 50 or IP 65 (optional) Type: Cross design, Nema 17 Output shaft: Solid shaft of 5 mm or hollow shaft of 8 or 14 mm (optional) Bus communication: CANopen, EtherCAT, EtherNet/IP, IO-Link, PROFINET Special feature: Precise position feedback via a battery-free absolute measurement system Special feature: Addressing via bus or address switch (not with IO-Link)...

... device • Electronic and self-adjusting tension control depending on the profile of the load • Capable of applying bands (strips) at any height of the load • Possibility of wrapping at ground level • Possibility of applying efficient dustproof and rainproof wrappings Application:Ring Stretch wrapping...

... AISI304 stainless steel - Used for thick and viscous products - Mixing device with movable Teflon scrapers (fluoroplastic) without blind spots or corners, the product is effectively mixed, which ensures that there are no areas for the accumulation of various microorganisms - Hygienic design for easy and quick cleaning of the unit - Tank holders on each side for convenient and easy handling of the...

...or change settings (on one side of the screen, there is a slot for inserting your micro SD card), and a flexible cable with a camera head at the end. The screen has a rechargeable battery, and the ergonomic handle is powered by a battery pack. The device has a battery life of 5 to 6 hours, with the option to connect it to mains power.

...A training device for the fingers to mobilize and strengthen the hand muscles. Air is alternately pushed from one chamber to the other. Diameter approximately 16 cm. Two interconnected oval air balls for a controlled muscle-building and coordination training in the fingers, hands, and arms. The hand trainer is inflatable; you can regulate the pressure resistance during training by adjusting the amount of air. Hand trainer approximately 16 cm Ø, Item number: 930...

... mode). Dot welding mode 2T and 4T. Adjusting of smooth drop of the terminating current. Adjustable inductance. Max power, kW:8,4 Voltage, V:380 Max current - Min current, А:5 - 315 Open circuit voltage, V:67 Duration of on at maximum current, %:60 Electrode diameter, mm:1,6 - 6 Burner operating mode :2-stroke / 4-stroke Weight, kg:38 Brand name :VIKING Country of Origin :Russia...

...The compact, mobile design allows for precise and repeatable bending in a vice. The drive is activated by a screw-in handle. A lockable adjusting ring ensures repeatable bending accuracy. Changing the plug-in tools is incredibly simple. The principle of 'stationary pipe and rotating tool' enables bending with minimal space requirements. For thin-walled pipes, sliding shoes are used for wrinkle...

... • Operating temperature range of -40°C to 105°C • ±30% tolerance • I2C interface Applications: The ADI Digital Potentiometer AD5254BRUZ10 can be used in a wide range of applications, including: • Adjusting the gain of amplifiers • Adjusting the brightness of LED displays • Adjusting the speed of motors • Adjusting the frequency of oscillators • Adjusting the sensitivity of sensors Kynix Part #:KY32...