NSGATE - Supplier of industrial networking products for outdoor Video Surveillance Systems

Outdoor UPS, NSBox-UPS are designed to operate in extreme environments and provide a reliable operation of outdoor video surveillance cameras, wireless monitoring and access control systems. The units are mounted in variety of electrical enclosures with protection category IP66 / NEMA4: powder-coated sheet metal, stainless steel, glass reinforced polyester, coated aluminium alloy (explosion-proof), depending on the field of application and operating conditions. With standard wall mounting or optional pole mounting kit (option NSBon-01), the installation for the NSBox-UPS is quick and easy. The basic kit includes the selected UPS-xx with a mounting kit for batteries 7Ah | 15Ah | 45Ah, a mounting plate with DIN rails for customer equipment, terminal blocks, a circuit breaker, an electrical grounding bar, a fan with a thermostat, the set of selected cable glands. The cable glands are mounted in the bottom of the enclosure, e.g. on a removable metal plate for sheet metal cabinets.

Renewable energy sources like solar and wind are ideal for powering equipment in remote locations. These types of off-grid systems are commonly used to power equipment for a variety of different industrial applications. Common applications include lighting, wireless surveillance cameras, sensors, environmental monitors, traffic signals, oil/gas pipes network, pump stations, telecommunication equipment, and anything else that requires reliable power in a remote location. NSBox-SUN Outdoor Access Node is used to deploy protected autonomous or semi-autonomous outdoor applications in the area with no 24/7 electricity available and solar panels can be installed. Typical application for NSBox-SUN is wireless surveillance system that is powered from street lighting where AC power is available only at the night time. NSBox-SUN can be even used if there is no AC power at all if PDs connected to it have low power consumption that can be filled up with energy

Electronic equipment installed inside a cabinet emits heat, which raises the internal temperature. Over time, rising temperature can cause electronic devices to a fail. Thermoelectric Coolers or Thermoelectric Assemblies are designed to divert an excess heat from electronic equipment installed inside an electrical enclosure. NSBox-ICE is a special series of electrical enclosures with installed thermoelectric assembly. The units are mounted in various series of electrical enclosures with protection category IP66 / NEMA4: powder-coated sheet metal, glass reinforced polyester, depending on the field of application and operating conditions. The basic kit includes the selected assembly with a thermostat, a mounting plate with DIN rails for customer equipment, terminal blocks, a circuit breaker, an electrical grounding bar, the set of selected cable glands. The cable glands are mounted in the bottom of the enclosure, e.g. on a removable metal plate for sheet metal cabinet.

There are a variety of industrial applications in remote and challenging locations where effective temporary CCTV monitoring and recording is required. But these applications, ranging from construction sites, environmental monitors, highways & rail, pipelines, pump stations, tunnels, public infrastructure, and local events, usually have no wired broadband or the wired service is unavailable. A problem? Not a problem, using the access nodes of NSBox-LTE series. NSBox-LTE allows 4G/LTE streaming of data pack large enough for CCTV. The system offers highest levels of security and encryption. A compact NVR can be added to NSBox-LTE as an intermediate buffer for video recordings. You can devise own bespoke Security systems like rapid deployment towers with mobile cloud VMS service and an extended temperature range.

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSB-3030 enclosures are made of powder-coated sheet steel and have a protection category of IP66 / NEMA4. The mounting plate material is zinc-plated sheet steel 2 mm. The enclosure is corrosion resistant for long service life. The sizes of NSB-3030 enclosures are 300 x 300 x 210 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly: Climatic control system inside enclosure: thermostats, Fan Heater, Thermoelectric Cooler/ Assembly;

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSB-3040 enclosures are made of powder-coated sheet steel and have a protection category of IP66 / NEMA4. The mounting plate material is zinc-plated sheet steel 2 mm. The enclosure is corrosion resistant for long service life. The sizes of NSB-3040 enclosures are 300 x 400 x 210 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly: Climatic control system inside enclosure: thermostats, Fan Heater, Thermoelectric Cooler/ Assembly;

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSB-3838 enclosures are made of powder-coated sheet steel and have a protection category of IP66 / NEMA4. The mounting plate material is zinc-plated sheet steel 2 mm. The enclosure is corrosion resistant for long service life. The sizes of NSB-3838 enclosures are 380 x 380 x 210 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly: Climatic control system inside enclosure: thermostats, Fan Heater, Thermoelectric Cooler/ Assembly;

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSB-3860 enclosures are made of powder-coated sheet steel and have a protection category of IP66 / NEMA4. The mounting plate material is zinc-plated sheet steel 2 mm. The enclosure is corrosion resistant for long service life. The sizes of NSB-3860 enclosures are 380 x 600 x 210 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly: Climatic control system inside enclosure: thermostats, Fan Heater, Thermoelectric Cooler/ Assembly;

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSB-4040 enclosures are made of powder-coated sheet steel and have a protection category of IP66 / NEMA4. The mounting plate material is zinc-plated sheet steel 2 mm. The enclosure is corrosion resistant for long service life. The sizes of NSB-4040 enclosures are 400 x 400 x 230 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly: Climatic control system inside enclosure: thermostats, Fan Heater, Thermoelectric Cooler/ Assembly;

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSB-6060 enclosures are made of powder-coated sheet steel and have a protection category of IP66 / NEMA4. The mounting plate material is zinc-plated sheet steel 2 mm. The enclosure is corrosion resistant for long service life. The sizes of NSB-6060 enclosures are 600 x 600 x 210 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly: Climatic control system inside enclosure: thermostats, Fan Heater, Thermoelectric Cooler/ Assembly;