Germany
Manufacturer/ Producer
Germany
Non-contacting multi-channel speed sensor with square wave output signal, stainless steel threaded tube, difference-hall-effect or inductive magnetic principle. Due to its design and its approvals especially suitable for shipbuilding industry. Robust housing: IP66/68 Excellent vibration and shock resistance Variable lengths, threads and electrical connections Optionally with two galvanically isolated output signals Optionally with additional status signal (e. g. direction of rotation detection) Approvals: ABS, BV, DNV-GL, LR
Request for a quoteGermany
High-quality mechanically connected tachogenerator with alternating voltage output signal. Suitable for harsh operating conditions. Direct and indirect drive possible. Protection class: IP66 Variable mechanical connections for speed acquisition. Approvals: GL
Request for a quoteGermany
NORIMETER – analogue indicator with stepping motor principle. Long lifetime due to compact and robust technology, a high protection class and a glass-fibre-reinforced, salt spray resistant plastic housing, suitable for outdoor areas. Individual scale design and corporate logos possible, even for small quantities. Square design: 72x72mm, 96x96 mm or 144x144 mm Round design: 60 mm, 80 mm, 100 mm or 130 mm (diameter) Other special functions (some as option): Monitoring total sensor failures, invalid sensor signal Wire-break monitoring of the sensor cable Short-circuit monitoring of the sensor cable Supply voltage failure monitoring (only on Live Zero units) Option: Additional signal LED (measurement value alarm, limit value monitoring) Option: Blinking pointer (measurement value alarm, limit value monitoring) Option: Minimum-Maximum value indication for saving and indicating the highest and lowest measured value. Option: Motor with anti-clockwise rotation.
Request for a quoteGermany
NORIMETER – analogue indicator with stepping motor principle. Long lifetime due to compact and robust technology, a high protection class and a glass-fibre-reinforced, salt spray resistant plastic housing, suitable for outdoor areas. Individual scale design and corporate logos possible, even for small quantities. Gauge square design: 72x72mm, 96x96 mm or 144x144 mm Gauge round design: 60 mm, 80 mm, 100 mm or 130 mm (diameter) Other special functions (some as option): Monitoring total sensor failures, invalid sensor signal Wire-break monitoring of the sensor cable Short-circuit monitoring of the sensor cable Supply voltage failure monitoring (only on Live Zero units) Option: Additional signal LED (measurement value alarm, limit value monitoring) Option: Blinking pointer (measurement value alarm, limit value monitoring) Option: Minimum-Maximum value indication for saving and indicating the highest and lowest measured value. Option: Motor with anti-clockwise rotation.
Request for a quoteGermany
Non-contacting multi-channel stainless-steel speed sensor, difference-Hall principle. Due to its design and type approval according to DIN EN 50155 especially suitable for transport technology. Up to 4 galavanically isolated measurement channels Robust and high quality housing: IP69 pressure-tight and individually tested at 5 bar (for details see technical data). Excellent vibration and shock resistance and double protection of the sensor head. Connection outlet straight or lateral; with protective tubing on request. Detection of very low speed (near zero speed).
Request for a quoteGermany
High-quality mechanically connected tachogenerator with alternating voltage output signal. Suitable for harsh operating conditions. Direct or indirect drive possible. Protection class: IP66 Variable mechanical connections for speed acquisition. Approvals: GL
Request for a quoteGermany
Non-contacting multi-channel stainless-steel speed sensor, eddy current principle. Due to its design and type approval according to DIN EN 50155 especially suitable for transport technology. Scanning of all electrically conductive materials (steel or aluminium). Insensitive against mechanical abrasion (metal chips). Robust and high quality housing: IP69 pressure-tight and individually tested at 5 bar (for details see technical data). Excellent vibration and shock resistance and double protection of the sensor head. Connection outlet straight or lateral; with protective tubing on request. Detection of very low speed (near zero speed).
Request for a quoteGermany
NORIMETER – analogue indicator with stepping motor principle. Long lifetime due to compact and robust technology, a high protection class and a glass-fibre-reinforced, salt spray resistant plastic housing, suitable for outdoor areas. Individual scale design and corporate logos possible, even for small quantities. Square design: 72x72mm, 96x96 mm or 144x144 mm Round design: 60 mm, 80 mm, 100 mm or 130 mm (diameter) Other special functions (some as option): Monitoring total sensor failures, invalid sensor signal Wire-break monitoring of the sensor cable Short-circuit monitoring of the sensor cable Supply voltage failure monitoring (only on Live Zero units) Option: Additional signal LED (measurement value alarm, limit value monitoring) Option: Blinking pointer (measurement value alarm, limit value monitoring) Option: Minimum-Maximum value indication for saving and indicating the highest and lowest measured value. Option: Motor with anti-clockwise rotation.
Request for a quoteGermany
Pressure sensor for absolute pressure measurement. Vacuum-proof Various process connections: G¼ B, ¼ - 18 NPT, M14 x 1.5 Measurement range: Min. 1 bar, max. 25 bar Electrical connections: Elbow connector Form A EN 175301-803, Circular connector Euro M 12 x 1, cable outlet 2 m length Certified for shipbuilding industry and offshore by DNV-GL
Request for a quoteGermany
Limit value switch for frequency (sinusoidal signal). Simple application; for rough environments. Limit value freely adjustable by drum scale. Open-circuit or closed-circuit devices available. Compact and robust construction. Operating status indication by integrated LED.
Request for a quoteManufacturer/ Producer
Muggenhofer Str. 95
90429 Nürnberg - Germany
Germany
The QuellTech laser sensor family Q4 or Q5 used for these tasks is generally mounted on an arm of a rotational axis, to scan along the complete 360° angle of the internal surface in a sequence of strips. The Q4 sensors can also be used to control the weld seam tracking itself for rapid setup and ease of use. Even during a project, the range and scope of the Q Series sensor demonstrates the advantages of a modular system to quickly adapt to project needs, where the smallest system has provided fast analysis of pipes as small as 105mm. The low power, with standard communication protocols, enable battery powered systems to transmit wireless data to other systems for review and cloud back up.
Request for a quoteGermany
Laser Scanner Solution: This task is a typical application of the high-resolution QuellTech 2D/3D Q5-880 Blue Laser Scanners. Two of these units are placed at the left and at the right of the measuring objects, at a defined inclination angle. Blue laser light in this case is a prerequisite, as the cast parts are red-hot, hence emitting in the red spectral range. Additionally, the client was in need of a software solution for the project, so a 3D point cloud processing application was implemented, performing inline and evaluating width, height and angle results. QuellTech customer is able to inspect continuously the product quality, simultaneously avoiding scrap. He uses the same system for more than 10 different types of castings. Errors caused by manual inspection are considerably reduced, and safety for personnel is enhanced.
Request for a quoteUnited Kingdom
Knight Optical can offer you Plane Mirrors (general, λ/1 and λ/4), for use within 3D Mapping Applications in a range of materials such as Soda-lime float glass, white float glass, and BK7 glass. Plane mirrors also known as front surface mirrors or first surface mirrors are used within 3D Mapping Applications. As stock we hold a number of general purpose, λ/1 and λ/4 with a range of up to 6 types of coatings such as Enhanced Aluminium, Ali/SiO2 and Ali/Mgf2. Our general purpose grade mirrors are made from good quality float glass and generally available in thicknesses of 1mm, 3mm and 6mm as standard. How our mirrors are used within 3D Mapping, is they are used as a sender and receiver of a laser beam that will take a reading of a specific surface, and from that reading it can create a 3D map of the surface that is has read. FOR MORE INFORMATION READ THE PDF..
Request for a quoteCreate one request and get multiple quotes form verified suppliers.