Germany
Manufacturer/ Producer
Germany
Mechanically connected, screw-in speed encoder with square wave output signal. Cost-effective speed sensor with square wave output signal. Can be mounted directly instead of using a flexible shaft. Can be loaded with 50 mA SINK and 20 mA LOAD. High EMC protection for harsh electrical environments. For harsh environments up to IP67.
Request for a quoteGermany
Mechanically connected, screw-in speed encoder with square wave output signal. Cost-effective speed sensor with square wave output signal. Can be mounted directly instead of using a flexible shaft. Can be loaded with 50 mA SINK and 20 mA LOAD. High EMC protection for harsh electrical environments. For harsh environments up to IP67.
Request for a quoteGermany
Measuring transducer for frequency (sinusoidal signal). Simple application; for harsh environments. Compact design for mounting side by side. Fine adjustment of the measuring range via sealed integrated trimming potentiometer. Operating status indication via integrated LED. Ideal for shipbuilding due to construction and approvals. Approvals: DNV-GL, LR
Request for a quoteGermany
Multifunctional device for frequency input and monitoring. Measurement of up to 2 speed signals with slip or offset measurement. Direction of rotation detection. Free programmable speed range. 2 galvanically isolated norm signal outputs (0...5 V, 0...10 V, 2...10 V, +/-5 V, +/-10 V, 4...20 mA or 0...20 mA). 6 potential-free relais outputs with normally open switch. Short-circuit- and overvoltage proof outputs. Simple mounting and operation. Approvals: Marine ABS, BV, DNV-GL, LR, NK, KR
Request for a quoteGermany
NORIMETER – 360° analogue indicator with stepping motor principle. Long lifetime due to compact and robust technology, a high protection class and a glass-fibre-reinforced, salt spray resistant plastic housing, suitable for outdoor areas. Individual scale design and corporate logos possible, even for small quantities. Monitoring for valid measuring signal. Option: Minimum-Maximum value indication for saving and indicating the highest and lowest measured value. Option: Motor with anti-clockwise rotation. Fulfils all conventional ship classifications: ABS, BV, DNV-GL, LR, MED
Request for a quoteGermany
Measuring transducer for frequency (three-phase generator). Simple application; for harsh environments. Compact design for mounting side by side. Fine adjustment of the measuring range via sealed integrated trimming potentiometer. Operating status indication via integrated LED. Approvals: BV, DNV-GL, LR
Request for a quoteGermany
Measuring transducer for frequency (sinusoidal signal). Simple application; for harsh environments. Compact design for row mounting. Fine adjustment of the measuring range via sealed integrated trimming potentiometer. Operating status indication via integrated LED. Approvals: DNV-GL, LR
Request for a quoteGermany
I/O slave module with 16 analogue inputs 16 analogue inputs for processing analogue standard signals (current, voltage, temperature, resistance) Robust design for harsh environments Ideal for use in shipbuilding thanks to approvals from classification societies
Request for a quoteGermany
Master display for alarm extension systems and duty alarm systems Visual and acoustic alarm triggering Central control of additional slave displays N3000-DSP10/20 Connection of group alarm annunciator N3000-SSP01 as an extension Duty assignment and duty takeover Engineer call function Dead-man function (DMP31 only) Ideal for use in shipbuilding thanks to approvals from classification societies
Request for a quoteGermany
Slave display for alarm extension systems and duty alarm systems Cabin unit for alarm extension systems and duty alarm systems (e.g. for ship cabins, mess room, office, bridge, etc.) Display of measurement value channels, channel statuses and alarms from the automation systems (e.g. IAMCS) Visual and acoustic alarm triggering Acoustic and visual fire alarm signalling from an external, independent fire alarm system (type N3000-DSP20 only) Ideal for use in shipbuilding thanks to approvals from classification societies
Request for a quoteManufacturer/ Producer
Muggenhofer Str. 95
90429 Nürnberg - Germany
Germany
Laser Scanner Solution: This task is a typical application of the high-resolution QuellTech 2D/3D Q5-880 Blue Laser Scanners. Two of these units are placed at the left and at the right of the measuring objects, at a defined inclination angle. Blue laser light in this case is a prerequisite, as the cast parts are red-hot, hence emitting in the red spectral range. Additionally, the client was in need of a software solution for the project, so a 3D point cloud processing application was implemented, performing inline and evaluating width, height and angle results. QuellTech customer is able to inspect continuously the product quality, simultaneously avoiding scrap. He uses the same system for more than 10 different types of castings. Errors caused by manual inspection are considerably reduced, and safety for personnel is enhanced.
Request for a quoteGermany
The QuellTech laser sensor family Q4 or Q5 used for these tasks is generally mounted on an arm of a rotational axis, to scan along the complete 360° angle of the internal surface in a sequence of strips. The Q4 sensors can also be used to control the weld seam tracking itself for rapid setup and ease of use. Even during a project, the range and scope of the Q Series sensor demonstrates the advantages of a modular system to quickly adapt to project needs, where the smallest system has provided fast analysis of pipes as small as 105mm. The low power, with standard communication protocols, enable battery powered systems to transmit wireless data to other systems for review and cloud back up.
Request for a quoteUnited Kingdom
Knight Optical can offer you Plane Mirrors (general, λ/1 and λ/4), for use within 3D Mapping Applications in a range of materials such as Soda-lime float glass, white float glass, and BK7 glass. Plane mirrors also known as front surface mirrors or first surface mirrors are used within 3D Mapping Applications. As stock we hold a number of general purpose, λ/1 and λ/4 with a range of up to 6 types of coatings such as Enhanced Aluminium, Ali/SiO2 and Ali/Mgf2. Our general purpose grade mirrors are made from good quality float glass and generally available in thicknesses of 1mm, 3mm and 6mm as standard. How our mirrors are used within 3D Mapping, is they are used as a sender and receiver of a laser beam that will take a reading of a specific surface, and from that reading it can create a 3D map of the surface that is has read. FOR MORE INFORMATION READ THE PDF..
Request for a quoteCreate one request and get multiple quotes form verified suppliers.