Germany
Manufacturer/ Producer
LABOM MESS- UND REGELTECHNIK GMBH
Germany
Thermowells are generally used where they remain in the measured medium and only the temperature sensor is to be replaced or retrofitted or the measured media must not touch the temperature sensor directly. Thermowells also provide protection against mechanical stress. Labom thermowells are manufactured according to national standards or to customer specifications. The corresponding Labom dial thermometers and temperature measuring transmitters are optimally adapted to them in metrological terms.
Request for a quoteLABOM MESS- UND REGELTECHNIK GMBH
Germany
Pressure gauge NG 63/100 in hygienic design for diaphragm seal operation, types series BH8: Features: High quality case NS 63/100 in hygienic design as per EHEDG recommendation Degree of protection IP 65 Accuracy class 1.6/1.0 per EN 837-1 Flush mounted diaphragm Small temperature error by means of reduced-volume measuring element Options Neck tube and diaphragm seal in a one-piece design, optionally complete case including neck tube and diaphragm seal in an hygienic version available (Ra < 0.76 µm as per ASME BPE SF3 / EHEDG Doc. 8) Material certificate per EN 10204 Calibration certificate per EN 10204 Damping of movement Precision scale Autoclavable EAC declaration (upon request)
Request for a quoteLABOM MESS- UND REGELTECHNIK GMBH
Germany
High-resolution graphic display with backlight Intuitive 4-button operation Comprehensive parameterising functions Comprehensive simulation and diagnostic functions Quick access to device data Development according to SIL2 Nominal range 0.25 bar to 40 bar Turndown up to100:1 Measuring rate up to 100 Hz Accuracy 0.1 % Output signal 4…20 mA with HART® protocol Configuration memory Digital communication via PDM, FDT/DTM, 375/475 Field Communicator Output functions: linear, invers, square root, table function Table function with up to 64 support points Stainless steel case in hygienic design, degree of protection IP 65/67 Media temperature up to 160 ° C Wetted parts stainless steel Case design: - process connection bottom - process connection back Various hygienic process connections Approved according to NAMUR 95 EAC declaration (upon request)
Request for a quoteLABOM MESS- UND REGELTECHNIK GMBH
Germany
Pressure transmitter with diaphragm seal technology for the measuring of relative and absolute pressures of gases, vapors and liquids Stainless steel case in sturdy design, degree of protection IP 65/67 Accuracy 0.1 % High-resolution graphic display with Intuitive 4-button operation and backlight Comprehensive parameterising functions Comprehensive simulation and diagnostic functions Quick access to device data Development according to SIL2 Nominal range 0,25 bar to 400 bar Turndown up to 100:1 Measuring rate up to 100 Hz Output signal 4…20 mA with HART® protocol Configuration memory Digital communication via PDM, FDT/DTM, 375/475 Field Communicator Output functions: linear, invers, square root, table function with up to 64 support points Media temperature -40…400 °C Case design process connection bottom Case design process connection back Various process connections Approved according to NAMUR 95 EAC declaration (upon request)
Request for a quoteLABOM MESS- UND REGELTECHNIK GMBH
Germany
The resistance thermometer in clamp-on technology is used for temperature sensing and process control, mainly for sterile applications in the food and pharmaceutical industries.The resistance thermometer can be quickly and easily fitted to all existing pipework. There are no changes necessary to the piping and no welding required. The resistance thermometer can be supplied with a built-in transmitter.
Request for a quoteLABOM MESS- UND REGELTECHNIK GMBH
Germany
Analogue pressure and differential pressure transmitter series Features: Analogue pressure and differential pressure in numerous designs Proven reliability in numerous designs and processes Piezoresistive measuring system or thin film Measuring system high overload protected Wetted parts of stainless steel Degree of protection IP 65 Options: Explosion protection for gases and dust GL (Germanischer Lloyd) certificated (CB1/CE1 only) Degree of protection IP 67 Classification per SIL2 (COMPACT)
Request for a quoteLABOM MESS- UND REGELTECHNIK GMBH
Germany
Pressure transmitter COMPACT Features: Measuring ranges 0…250 mbar up to 0…100 bar Linearity error including hysteresis <+ 0.2 % f.s. Piezoresistive measuring system Hygienic design according to EHEDG, FDA and GMP recommendations Material and surface quality according to the hygienic requirements Wetted parts of stainless steel; completely welded Stainless steel housing as standard or field housing Degree of protection IP 65, IP 67 option Output signal: 4…20 mA Process temperature up to 200 °C Options: Explosion protection for gases Classification per SIL 2 Inspection certificate: material certificate as per DIN EN 10204-3.1
Request for a quoteLABOM MESS- UND REGELTECHNIK GMBH
Germany
The digital differential pressure transmitter PASCAL Ci4 Delta P has been specially designed for the mounting of diaphragm seals with a volume reduced differential pressure chamber. Due to this design the transmitter is suitable for various applications, e.g. for the level measurement of pressure vessels.
Request for a quoteLABOM MESS- UND REGELTECHNIK GMBH
Germany
The temperature transmitter PA2530 with mit IO-Link is suitable for hygienic temperature measurement in connection with the following resistance thermometers ■ LABOM MiniTherm, Type series GA27 (see data sheet T4-014, T4-015 and T4-017) ■ LABOM Clamp-on, Type series GA2610 (see data sheet T4-028) Due to its compact design the transmitter fulfils the hygienic requirements of plant and machinery engineering.
Request for a quoteLABOM MESS- UND REGELTECHNIK GMBH
Germany
Pressure transmitter/Pressure switch PASCAL CSfor general applications, Type series CS2100 Multifunctional pressure transmitter/pressure switch Degree of protection IP 65 4 digit LED display, can be mirror-imaged by 180° Indication module can be turned through 300° Measuring ranges 0…100 mbar to 0…40 bar rel., 0…1 bar to 0…6 bar abs, High pressure 0…60 bar to 0…400 bar Output signal 4…20 mA, 2-wire technology Accuracy: ≤ 0.2 % Easy to program locally (as per VDMA standard) Galvanic isolation between transmitter and switching outputs Various process connections Options 2 floating contacts Switching contacts with high switching current (1A) Inspection certificates - material certificate per DIN EN 10204-3.1 - calibration certificate per DIN EN 10204-3.1 Electrical connection rotatable by 300° Degree of protection IP 67
Request for a quoteManufacturer/ Producer
Im Gewerbepark 13
27798 Hude - Germany
BURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
The new strain gage amplifier with IO-Link interface enables digitalization of the measurement technology right from the sensor. Its compact design and high degree of protection allow the instrumentation amplifier to be used practically anywhere in the field. Strain gage sensors typically have an output voltage of a few millivolts. In industrial environments, e.g. in the vicinity of electric motors or frequency converters, interference can affect the measurement result when transmitting analog signals. This is reliably avoided using the new strain gage amplifier with IO-Link interface. The analog link between the sensor and instrumentation amplifier is kept as short as possible, the standardized IO-Link communication is fully digital and interference-free. The amplifier is powered directly via the IO-Link interface – a standardized 5-wire cable with M12 socket. Strain gage sensors can be connected via a 4-pin M8 connector.
Request for a quoteTROTEC GMBH
Germany
The T610 is a handheld measuring instrument from the Trotec MultiMeasure family, used for quick non-destructive moisture measurement up to 300 mm. Another advantage of the process, aside from the measuring depth, is its independence from the level of salt content in the material. This creates no dissimilarity to the microwave technique, whether it is an older or a new building being gauged. Since the unit’s screen can show two values, for purposes of results evaluation, a function value can be indicated at the same time as the present measured value, if needed. The T610 moisture meter can be linked to a PC through a USB cable. Due to the MultiMeasure Studio Software, the gauged values of the device can be transported online and in real time to the PC. A few practical benefits: German industrial design in robust, premium two-component construction with IP54 type of protection
Request for a quoteAPT ANGEWANDTE PROZESSORTECHNIK GMBH
Germany
Overpressure or underpressure - Different pressure and measuring ranges - Various operating languages - Optionally with ProfiNet interface and USB interface - Robust, durable design
Request for a quoteBURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
DIGIFORCE® 9311 is the new standard in efficient quality control. The pioneering force/displacement controller delivers rapid, precise evaluation results for applications that demand both high quality and high productivity. The smart performance features and intelligent hardware make test equipment quicker to set up, easier to use and capable of automatic integration in modern production systems. This unrivalled product specification gives businesses the added security and dependability they need for increasingly complex production processes. The DIGIFORCE® 9311 monitors processes in which precisely defined functional relationships need to be demonstrated between two measured quantities of the process. For instance when recording and monitoring processes such as press-insertion, joining, riveting, stamping or caulking, reliable quality control depends on synchronous and high-speed acquisition of measured values combined with analysis based on versatile evaluation elements.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.