Germany
Manufacturer/ Producer
KITO ARMATUREN GMBH
Germany
For installation into pipes to the protection of vessels and components against deflagration of flammable liquids and gases. Approved for all substances of explosion groups IIA1 to IIA with a maximum experimental safe gap (MESG) > 0.9 mm. Bi-directionally working in pipes, whereby an operating pressure of 1.2 bar abs. and an operating temperature of 60 °C must not be exceeded. The distance between a potential ignition source and the flame arrester must not exceed 50 times the inner pipe diameter. The installation of the Deflagration flame arrester into horizontal and vertical pipes is permissible. When equipped with one or two temperature sensors, the devices are protected under atmospheric conditions against a short time burning by a burning time tBT = 1.0 min. If only one temperature sensor, then it is to be placed on the device side where a burning could be expected.
Request for a quoteManufacturer/ Producer
Grotrian-Steinweg-Strasse 1C
38112 Braunschweig - Germany
TEC ARTEC GMBH
Germany
The TEC artec TECpress steam conversion station is a combination of pressure, quantity and temperature control. The subcritical controlled pressure release is integrated with the proven downstream temperature control systems into a complete solution. Due to different design versions, various applications such as turbine bypass stations or district heat extraction can be realised.
Request for a quoteTEC ARTEC GMBH
Germany
Our patented desuperheater TECtemp HT L lance cooler is suitable for applications at temperatures up to 750 °C due to non-moving parts in the steam flow. The three-part design makes it possible to bring the control unit with drive out of the high temperature area. The reduced weight of the steam lance has a positive effect on the support load of the steam line. The functional principle is based on the proved TECtemp desuperheater. The compact control unit can be removed easily and can be serviced individually for servicing work.
Request for a quoteTEC ARTEC GMBH
Germany
Our patented desuperheater TECtemp HT R ring cooler is designed with a three-part structure without moving parts and without weld seams in the steam lances. These are arranged in a ring shape depending on the steam pipe nominal diameter. For example. 40 individually controlled nozzles can be used in this way. Homogeneous distribution of the injection water makes short evaporation sections and minimal load of the steam pipe possible. The geometry of the steam lances acts like a venturi nozzle in the steam pipe which results in clearly reduced loss of pressure.
Request for a quoteTEC ARTEC GMBH
Germany
Our patented desuperheater TECtemp HT V venturi cooler is suitable for applications at temperatures up to 750 °C for small pipeline nominal diameters due to non-moving parts in the steam flow. The three-part design makes it possible to bring the control unit with drive out of the high temperature range. The functional principle is based on the proven TECtemp desuperheater. The compact control unit can be removed easily and can be serviced individually for servicing work. This desuperheater is used as a compact solution for small pipelines with a high number of nozzles and small pressure loss requirements.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.