Germany
Manufacturer/ Producer
KITO ARMATUREN GMBH
Germany
As breather/venting safety device incorporating an explosion proof flame arrester element for installation on top of storage tanks, tank access covers or breather pipes. The breather allows the unimpeded flow of gases out to atmosphere and air into the tank/pipe thereby preventing vacuum locks whilst ensuring provision of a permanent and reliable protection against any flashback into the tank/pipe. This device is not permitted to be installed in enclosed areas. Approved for all materials of the explosion group IIB3 with a maximum experimental safe gap (MESG) ≥ 0.65 and an maximum operating temperature of 60 °C.
Request for a quoteKITO ARMATUREN GMBH
Germany
For installation into pipes to the protection of vessels and components against stable detonation of flammable liquids and gases. Tested and approved as detonation flame arrester type 4. Approved for all substances of explosion groups IIA1 to IIA with a maximum experimental safe gap (MESG) > 0.9 mm. Bi-directionally working in pipes, whereby an operating pressure of 1.2 bar abs. and an operating temperature of 60 °C must not be exceeded. The installation of the detonation flame arrester into horizontal and vertical pipes is permissible. Provided with one or two temperature sensors (PT 100) the armature is certified against short time burning from one or both sides. If only one thermal sensor is attached, it must be installed into that part of the body from which a fire is expected.
Request for a quoteKITO ARMATUREN GMBH
Germany
As end-of-line armature, for venting apertures on tank installations. Used mainly as venting and breather device for fixed roof tanks. Used to prevent inadmissible pressure and vacuum and to minimize unwelcome gas losses or inadmissible emissions respectively. The housing is mounted perpendicularly on a tank roof. The product vapours can be discharged through a collective line into the atmosphere connected to the line flange on the pressure side.
Request for a quoteKITO ARMATUREN GMBH
Germany
For installation into pipes to protect containers and components against stable detonation of flammable liquids and gases. Tested and approved as detonation flame arrester type 4. Approved for all substances of explosion groups IIA1 to IIA with a maximum experimental safe gap (MESG) > 0.9 mm. Working unidirectional in pipes, whereby an operating pressure of 1.2 bar abs. and an maximum operating temperature of 60 °C must not be exceeded. Provided with one temperature sensor (PT 100) the armature is certified against short time burning from one side. The installation is not dependent on the position and both directions of flow are possible. During installation, please observe the direction of detonation and the indication „protected side“.
Request for a quoteKITO ARMATUREN GMBH
Germany
As emergency venting device for installation on storage tanks with a VRV to protect against hazardous excess pressure but minimize the loss of gas/vapours. Also suitable as replacement of a manhole. This device does not protect against the hazard of explosion or stabilized burning.
Request for a quoteKITO ARMATUREN GMBH
Germany
Application as end-of-line armature for venting apertures on tank installations, valve is explosion-proof and endurance-burning proof for certain inflammable liquids. Used mainly as venting and breather device for fixed roof tanks to prevent inadmissible pressure and vacuum and to minimize unwelcome gas losses and inadmissible emissions. Approved for all materials of the explosion group IIA with a maximum experimental safe gap (MESG) > 0.9 and a maximum operating temperature of 60 °C. The housing is mounted perpendicularly on a tank roof. If required by the customer, the valve is equipped with an explosion-proof condensate drain device.
Request for a quoteKITO ARMATUREN GMBH
Germany
Application as end-of-line armature for venting and breathing of tanks. Tested and approved against atmospheric deflagrations for all materials of the explosion group IIB3 with a maximum experimental safe gap (MESG) ≥ 0.65 mm and a maximum operating temperature of 60 °C. Vertical mounting (for tank roofs) with an integrated elbow as an option.
Request for a quoteKITO ARMATUREN GMBH
Germany
Explosion proof safety valve to protect inbreathing openings of storage tanks, vessels and pipes to prevent inordinate vacuum. Approved for flammable liquids of explosion group IIB3 with a maximum experimental safe gap (MESG) ≥ 0.65 mm and a Maximum operating temperature of 60 °C.
Request for a quoteKITO ARMATUREN GMBH
Germany
Installation into pipelines as inline detonation flame arrester e. g. for the protection of ignition gas lines or measuring devices. Applicable for all materials of the explosion groups IIA1 up to IIA with a maximum experimental safe gap (MESG) > 0.9 mm. Operating from both sides, for a maximum operating pressure of 1.2 bar abs. and a maximum operating temperature of 60 °C.
Request for a quoteKITO ARMATUREN GMBH
Germany
Application as inline armature with venting and breather valve function for vessels. Preferably used for installation in pipes.
Request for a quoteManufacturer/ Producer
Grotrian-Steinweg-Strasse 1C
38112 Braunschweig - Germany
TEC ARTEC GMBH
Germany
The TEC artec TECpress steam conversion station is a combination of pressure, quantity and temperature control. The subcritical controlled pressure release is integrated with the proven downstream temperature control systems into a complete solution. Due to different design versions, various applications such as turbine bypass stations or district heat extraction can be realised.
Request for a quoteTEC ARTEC GMBH
Germany
Our patented desuperheater TECtemp HT L lance cooler is suitable for applications at temperatures up to 750 °C due to non-moving parts in the steam flow. The three-part design makes it possible to bring the control unit with drive out of the high temperature area. The reduced weight of the steam lance has a positive effect on the support load of the steam line. The functional principle is based on the proved TECtemp desuperheater. The compact control unit can be removed easily and can be serviced individually for servicing work.
Request for a quoteTEC ARTEC GMBH
Germany
Our patented desuperheater TECtemp HT R ring cooler is designed with a three-part structure without moving parts and without weld seams in the steam lances. These are arranged in a ring shape depending on the steam pipe nominal diameter. For example. 40 individually controlled nozzles can be used in this way. Homogeneous distribution of the injection water makes short evaporation sections and minimal load of the steam pipe possible. The geometry of the steam lances acts like a venturi nozzle in the steam pipe which results in clearly reduced loss of pressure.
Request for a quoteTEC ARTEC GMBH
Germany
Our patented desuperheater TECtemp HT V venturi cooler is suitable for applications at temperatures up to 750 °C for small pipeline nominal diameters due to non-moving parts in the steam flow. The three-part design makes it possible to bring the control unit with drive out of the high temperature range. The functional principle is based on the proven TECtemp desuperheater. The compact control unit can be removed easily and can be serviced individually for servicing work. This desuperheater is used as a compact solution for small pipelines with a high number of nozzles and small pressure loss requirements.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.