Germany
Distributor
DRIESEN + KERN GMBH
Germany
The P-Log3021-MMC was specifically developed for applications demanding an increased memory capacity and high sampling rates. The measurement of the water level is carried out based on a piezoresistive pressure sensor and the measurement of the temperature is achieved by a high-precision measuring resistor. Its exceptionally high resolution and accuracy allow for water level and wave movements to be measured accurately to the very last millimetre.
Request for a quoteDRIESEN + KERN GMBH
Germany
The μS-Log3040 can measure conductivity and temperature in aqueous solutions at the same time. Typical fields of application are monitoring wells, rivers, lakes and sewer tunnels or transportation, e. g. of fish.
Request for a quoteDRIESEN + KERN GMBH
Germany
The pH-Log3030 is a self-sustaining data logger for unsupervised measurements and logging of pH and temperature. It is perfectly suitable for water quality surveys, e. g. in bodies of water or sewer tunnels, or for monitoring in transportation, e. g. fish or fluids. Once the pH Log3030 has ben set up with a PC it records measurements of the chosen parameters in a freely programmable interval.
Request for a quoteDRIESEN + KERN GMBH
Germany
The O2-Log3050 is a data logger for dissolved oxygen and temperature. It measures the oxygen saturation level in the water and saves the readings to its internal memory. It also calculates the ppm and mg/l concentration and allows for user-friendly recalibration and changing of its O2 electrode. In combination with its automatic temperature compensation it is best suited for operation in lakes, rivers, in sewage-treatment plants or for monitoring transportation, e. g. of fish.
Request for a quoteDRIESEN + KERN GMBH
Germany
Sensors for Water Quality Parameters pH/Temperature pH-Sense330 Conductivity/Temperature µS-Sense340 O2 Saturation/Temperature O2-Sense350 The Sense300 Series by Driesen+Kern GmbH consists of three models for different water quality parameters. Each sensor model also measures temperature thus ensuring precise and temperature compensated readings. Electronic circuits are entirely integrated into the stainless steel housing making it compact and entirely submersible. Of course, it can also be installed in the process assembly. The user himself can perform calibration and exchange the electrode on each model. Devices are available with analog, digital and switching output. Analog outputs are 0-1V/0-10V or 4..20mA in thre-wire or as 4-20mA current loop. Optionally, the sensors can be fitted with a relay output whose switching value will be factory-set, but can later be changed with the programming kit.
Request for a quoteDRIESEN + KERN GMBH
Germany
P-Sense transducers for pressure and temperature can be used both in air and in water or other fluids. Devices come with analog, digital or switching output and can be configured for absolute pressure or gauge pressure measurements. Potential fields of application are water level monitoring or fluid level measurements, e. g. in bodies of water, sewage treatment plants, storage tanks etc. The p-Sense320 probe can be fitted with an RS485 interface instead of an analog output which can optionally be connected to a computer using a RS232 adapter. Connection and data transfer to a PC/notebook can established with the Windows terminal.
Request for a quoteDRIESEN + KERN GMBH
Germany
Temperature loggers TempLog "rugged" by Driesen+Kern GmbH are extremely robust miniaturized data loggers for temperature. The DK310 incorporates an integrated temperaturesensor whereas the DK311 offers an connector socket for an external temperature sensor. Standard probes are reasonably priced air or surface probes, however a variety of other sensors are optionally available. The housing is made of high quality, shock-proof POM protecting the data logger even under rough conditions. The DK311 is protected against splash water according to IP65 - the DK310 complies even with IP68 and is thus fully submersible.
Request for a quoteDRIESEN + KERN GMBH
Germany
Data Logger for Temperature Measurements The TempLog TC data loggers by Driesen+Kern GmbH are designed to be used with thermocouples (Types K, T, J, B, E, N, R, S). There are two models available: DK315-TC with a single input channel for a thermocouple, and DFK316-TC with two input channels. Please see our range of thermocouples for surface temperature, air temperature, product temperature which are compatible with the TempLog TC data logger.
Request for a quoteDRIESEN + KERN GMBH
Germany
The data logger type Dk8040 is a robust and flexible datalogger with up to 10 channels. Each channel can be configured by the user separately for soil moisture, temperature, humidity, condensation as well as several voltage signals. The logger is protected by a robust, IP65 splash water resistant housing enabling applications under tough conditions such as rain or snow.
Request for a quoteSHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
These are the accssories use for machines.
Request for a quoteQUELLTECH GMBH
Germany
The QuellTech laser sensor family Q4 or Q5 used for these tasks is generally mounted on an arm of a rotational axis, to scan along the complete 360° angle of the internal surface in a sequence of strips. The Q4 sensors can also be used to control the weld seam tracking itself for rapid setup and ease of use. Even during a project, the range and scope of the Q Series sensor demonstrates the advantages of a modular system to quickly adapt to project needs, where the smallest system has provided fast analysis of pipes as small as 105mm. The low power, with standard communication protocols, enable battery powered systems to transmit wireless data to other systems for review and cloud back up.
Request for a quoteQUELLTECH GMBH
Germany
Laser Scanner Solution: This task is a typical application of the high-resolution QuellTech 2D/3D Q5-880 Blue Laser Scanners. Two of these units are placed at the left and at the right of the measuring objects, at a defined inclination angle. Blue laser light in this case is a prerequisite, as the cast parts are red-hot, hence emitting in the red spectral range. Additionally, the client was in need of a software solution for the project, so a 3D point cloud processing application was implemented, performing inline and evaluating width, height and angle results. QuellTech customer is able to inspect continuously the product quality, simultaneously avoiding scrap. He uses the same system for more than 10 different types of castings. Errors caused by manual inspection are considerably reduced, and safety for personnel is enhanced.
Request for a quoteKNIGHT OPTICAL (UK) LTD
United Kingdom
Knight Optical can offer you Plane Mirrors (general, λ/1 and λ/4), for use within 3D Mapping Applications in a range of materials such as Soda-lime float glass, white float glass, and BK7 glass. Plane mirrors also known as front surface mirrors or first surface mirrors are used within 3D Mapping Applications. As stock we hold a number of general purpose, λ/1 and λ/4 with a range of up to 6 types of coatings such as Enhanced Aluminium, Ali/SiO2 and Ali/Mgf2. Our general purpose grade mirrors are made from good quality float glass and generally available in thicknesses of 1mm, 3mm and 6mm as standard. How our mirrors are used within 3D Mapping, is they are used as a sender and receiver of a laser beam that will take a reading of a specific surface, and from that reading it can create a 3D map of the surface that is has read. FOR MORE INFORMATION READ THE PDF..
Request for a quoteCreate one request and get multiple quotes form verified suppliers.