BOPP & REUTHER MESSTECHNIK GMBH

The control of the quantities of liquid products in the mineral oil industry and in the chemical and petrochemical industry requires volume-measuring instruments, which are adjusted to the special operating conditions and characteristics of the transported materials being measured both with respect to design and materials used. Oval wheel meter of the OaP series meet these requirements. They are used for measuring liquid raw, intermediate and finished products such as liquefied gases, gasolines, heating oils, lubricating oils, transmission oils, solvents, bitumen, alkaline solutions, acids and other chemical liquids. Meters of this series are employed for the filling of tank trucks, rail tank cars and tanker ships, in pipeline operations and the process technology for the determination f balance sheets of materials such as heating oil consumption and the control of burners etc. Due to the high measuring accuracy and operational safety, oval wheel meters from this series are...

The control of the quantities of industrial liquids is an economic necessity considering the high value of these products. The volume measuring instruments required for this must be adjusted to the particular operating conditions and the characteristics of the materials to be measured both with respect to design and the materials used for these instruments. Oval wheel meter series OK have a shutoff valve (compact design). For the automatic dosage of chmemical liquids of all types such as solvents, resins, colors, paints and, with som eindividuell limitations, alkaline solutions, organic and inorganic acids depending on temperature and concentration. Not suited for liquified gases and liquid foods. For all types of series OK the casing is also the measurement chamber for all types. A permanent magnetic coupling is the basis for the non-positive transmission, without a compression gland, of the rotational movement of both oval wheels from the measurement area to the dry...

Technical specification • DN 10 - 65 • PN 16 - 320 • flow rates 0,15 - 120 m³/h • accuracy ± 0,15 % over a reduced flow range ( for viscosities of 0,2 – 0,7 mPa ·s ) • accuracy ± 0,25 - 0,3 for the standard - flow range ( for viscosities of 0,2 – 0,7 mPa ·s ) • operating temperature according to design -196°C to +250°C • for custody transfer admitted Accessoires • electronical Counter • pulse pick-up • strainer • gas separator • processing peripherals

Technical specifications • DN 80 - 300 • PN 16 -100 • flow rates 18 - 2400 m³/h • accuracy ± 0,15 % over a reduced flow range ( for viscosities of 0,2 – 0,7 mPa ·s ) • accuracy ± 0,25 - 0,3 for the standard - flow range ( for viscosities of 0,2 – 0,7 mPa ·s ) • operating temperature according to design -190°C to +250°C • for custody transfer admitted Accessoires • electronical Counter • pulse pick-up • strainer • gas separator • processing peripherals

The VTX2 vortex meter is used for flow and volumetric measurements of conductive and non-conductive fluids, gases and vapours in all industrial branches. Applications include volumetric measurements for balancing (compressed air systems, heat carriers, vapours, chemical products, for example), process control and high throughput applications. Technical specifications • DN 15 - 300 (higher on request) • PN 10 - 40 • Flow rate 0,4 - 20000 m³/h • Measurement accuracy Gas and Steam: ± 0,9 % • Measurement accuracy liquids: ± 0,6 % • operating temperature according to design -40°C to +260°C, optional to 450°C Accessories • Strainer • gas separator • processing peripherals Advantages • high reliability • overloadable • interchangeable pressure sensor (optional) • measurements in harsh environments (vibration) is possible • good results even at low pressures and low volume flows