Woven strapping - Import export

The operator wrap the product with the strap, put the two ends through the buckle and places into the strapping tool. The first end is locked with the brake while the second is placed under the cutter and inside the tension roller. Increasing the tension of the strap, the buckle keeps the tension. After reaching the desired tension the strap is cut automatically by the tensioning device.

The woven strap is widely used when you need to tie and secure the products by means of ligatures that are not constituted by iron or plastic strap. Woven strap features: - Excellent tension maintenance. - Perfect elasticity in case of shock. - No conjunctions. - It ensures minimum wastage. - Perfect winding. For the ligation you need a tensioner, the strapping band, the buckles and a strap-holder trolley to prevent strap damage. Different types of straps, more professional strapping tools and various types of trolleys are available on request.

Pneumatic tensioner model FP CORD for tensioning and cutting of polyester strap textile and composite. Equipped with high tension force (7500 N) allows the use of strap widths up to 32 mm. By acting on the supply pressure it is possible to adjust the tension. The built-in knife allows cutting the strap easily and without waste of material. The holding capacity of strap depends on material type to strap and on strap choice.

Pneumatic tensioner model FP LASH very powerful and easy to handle, suitable for all working conditions, guarantees a high tensile strength and it is suitable for securing bulky and heavy loads on trucks, containers, ships, etc. The high tension force (7500 N) allows the use of textile strap with width up to 50 mm. It is also possible to adjust the tension acting on the supply pressure. The holding capacity of strap depends on material type and on strap of choice.

Woven dress with straps

Woven dress with straps

Woven dress with straps

Woven dress with straps

Woven dress with straps

Woven cotton dress with straps

Woven cotton "boble" dress with straps 100.0% Cotton Find out here how to identify the symbols of your new FS Baby clothes. >Machine Wash - Max Temperature 30 ºC Low Heat Iron - Max Temperature 110 ºC Do Not Bleach Dry Cleaning Do Not Tumble Dry

The protection against „sharp edges“ Alongside other factors such as temperature, chemical environment and mechanical loads, the „sharp edge“ remains one of the main causes of damage to the lifting accessory itself and frequent cause of accidents. Most damage on sharp or rough edges is the result of load movement perpendicular to the load lifting accessory. If the edge is „sharp“ it can, in a worstcase scenario, cut through the lifting accessory. If the load moves laterally, a cutting movement takes place at the edge. Much like the blade of a knife, the edge can cut through the fibres of the textile lifting accessory. For loads with a „sharp edge“ or with a rough surface, a protective sleeve or fixed coating is recommended to protect the textile lifting strap.

The secutex clip [SC] can be quickly mounted thanks to mounting slots on the backside. On a case to case basis, it is preferably used in places where round slings or protective sleeves are required. Important The clip [SC] offers simple handling and quick setup times. The secutex protective layer can be placed softly and flexibly on the load, increasing the radius on critical edges. Leverage force can be extensively distributed and the load remains undamaged.

Economical and durable A perfect combination Excellent handling, as the loops of the wear strap are extremely flat and can be easily inserted under the load. The rigid wear strap can be easily pushed even through narrow gaps. Improved efficiency, as the crane does not have to be lowered as far. Experience has shown, lifting processes have been significantly improved. Extra light, as the textile material of the sling offers a clear weight advantage over steel cables or chains. Economical, as only the lowcost wear strap has to be replaced! Durable, as the loop of the wear strap is coated and is therefore protected against wear.

We recommend against turning stacked coils upright on the stack. The first choice for the raising of packages delivered in a horizontal position with split straps is therefore always a coil turning seat. However, there is not always a fixed installation for raising narrow coils. The secutex splitband turning strap has two different attachment ends. One end loop of the secutex lifting strap is flat, and can be easily threaded through the gap between the split bands. The flat end loop can then be easily hooked into the forged Cshackle. The protective sleeve is positioned against the “sharp edges“ of the coil. During lifting, the strap moves freely through the protective sleeve while the latter remains motionless against the load. There is no movement, and therefore no wearing against the “sharp edges“. The solution An end loop of secutex lifting slings for slit strips is flat and can easily be pushed into the gap between the slit strips.

The form and surface of the edge have a significant effect on the durability of the lifting accessory. Very rough surfaces, such as tsleeve of precast concrete products, can quickly damage the lifting strap or cable. If nothing moves, there can be no wear. The cutresistant secutex protective sleeve sits firmly against the edge and the textile lifting strap runs reliably through the protective sleeve.

In addition to loads with rightangled edges, there are also transportable goods with different geometry. These include loads with projecting spines and with sharp or jagged external contours such as gearwheels, turbine blades, etc. These edges are not addressable using normal approaches. The secuwave protective sleeve was developed for components with extremely critical edges. secuwave increases the deflection radius. The „sharp edge“ has no contact with the protective sleeve and thus cannot cut it.

For particularly heavy loads, normal secutex protective sleeves can only be used for larger edge radii because the heavyload round slings under load are up to 80 mm thick. According to the technical definition, this creates a “sharp edge“. Both the loadbearing round slings as well as the protective sleeve will be destroyed by the forces which occur here. The secuwave edge protector increases the load’s edge radius. The wave profile helps the edge protector adapt to the load. The castin perforated plate then permanently keeps the shape. The additional secutex protective sleeve reliably prevents the edge protector from moving through the heavyload round sling. Possible applications bridge elements, machinery, gear segments etc.

If the load has sharp edges or has a rough outer surface, a suitable abrasion or edge protector must be used. secutex edgeprotectors are easy and versatile to use. The extremely robust secutex edgeprotectors protect the load and the lashing belts. They increase the radius of the edge and prevent “sharp edges”. The corner edgeprotector SWH for lashing belts considerably increases the radius on the corners. It is particularly robust and durable thanks to the perforatedplate reinforcement. An optional magnetic version can be easily attached to the magnetic load.

By means of a hinge, the edge protector SKB can be optimally suited to fit any load geometry. It can be optionally equipped with magnets to better retain its position on the magnetic load. The edge protector can be quickly secured to the edge of the lashing belt by means of mounting slits. The lashing belt slides through the secutex clip which remains on the lashing belt despite collisions. Optionally available Magnets for easy fixation of the magnetic load

Even when securing the load, the lashing material must be protected against the „sharp edge“. Highvalue loads may not be damaged by lashing chains or ropes. The SKBE secutex simple edge protector has a low deadweight and is easy to handle thanks to the flexible textile reinforcement. It is simply pushed onto the lashing material via the fulllength opening on the reverse side and is thereby impossible to lose. Important note the secutex simple edge protector SKBE is not suitable for prolonged use.

Even when securing the load, the wire cable must be protected from the “sharp edge“. Highvalue loads may not be damaged by wire cables. The secutex simple edgeprotector SKDE is easily pushed over the backside of the mounting slit and over the wire cable. It is affixed and can no longer be detached. The edgeprotector is simple and versatile. The corner protector has a low deadweight and is quick and easy to handle thanks to the flexible textile reinforcement.

When lifting machinery components, there are always edges and surfaces which are insufficiently protected by regular edgeprotectors and protective sleeves. Textile load lifting accessories cannot always be used, as the cables or chains being used press against the load with extreme pressure. Damage to the often expensive and highlymachined components is often unavoidable and the edges must be reworked at great cost. The secuPad is DIN A4 size and can easily be placed at critical locations by hand. It consists of multiple textile layers joined together on every side. It adapts flexibly even to difficult contours. The surface is coated in Powerflex and protected against abrasion and the penetration of shavings and lubricants.

This protective sleeve is particularly robust and has two contact sides in this version for work on both sides. Both contact sides are coated with secutex. They are extremely resistant and minimize the buildup of wrinkles in the textile. Use of the protective sleeve is no longer necessary.

The secutex protective sleeve is optimally coordinated from a technical standpoint for the spanset lashing belt programme or the spanset round slings. The contact side is coated with secutex. It is extremely resistant and minimizes the buildup of wrinkles in the textile. The secutex protective sleeve with singlesided coating can be easily pushed over lifting equipment and protects against damage caused by “sharp edges” and the rough edges of the lifting equipment and the load at the same time.

secutex protective sleeves protect loads and textile lifting accessories against marks left by handling. If an edge exceeds the range covered by the norm, the usual textile lifting accessories can no longer be used in conjunction with the secutex protective sleeve. If the edge radius of a load is less than 2 mm, lifting experts refer to it as a “critically sharp edge“. secuwave and secuwave Mini are thicklycoated protective sleeves with a wave structure on the contact side. The wave structure increases the bending radius of “sharp edges”. The edge lies in a wave trough, while the load rests on the wave peak. Therefore, the “sharp edge“ has no contact with the protective sleeve. secuwave is delivered as a clip. This means that it can be subsequently added to a lifting situation. secuwave is available in two versions. The various sizes mean that the suitable wave size can be used. The smaller wave size means that the thick coating is more flexible in the bending direction.

This protective sleeve sits firmly on the lifting strap and therefore stays in its position when the lifting strap is in contact with the load. The contact side is coated with secutex which is extremely tearresistant and reduces the formation of creases in the textile strap. The reverse side is coated with Powerflex and protected against abrasion and penetrating dirt. The very flat form and resistance to bending in a longitudinal direction make it simple to insert the SFXequipped strap into small gaps. The firm grip prevents unintentional slipping.

secutex protective sleeves protect loads and textile lifting accessories against marks left by handling. If an edge exceeds the range covered by the norm, the usual textile lifting accessories can no longer be used in conjunction with the secutex protective sleeve. If the edge radius of a load is less than 2 mm, lifting experts refer to it as a “critically sharp edge“. secuwave and secuwave Mini are thicklycoated protective sleeves with a wave structure on the contact side. The wave structure increases the bending radius of “sharp edges”. The edge lies in a wave trough, while the load rests on the wave peak. Therefore, the “sharp edge“ has no contact with the protective sleeve. secuwave is delivered as a clip. This means that it can be subsequently added to a lifting situation. secuwave is available in two versions. The various sizes mean that the suitable wave size can be used.

While the stiffness of regular protective sleeves often makes lifting easier, it can be rather uncomfortable when handling smallersized loads. Small gaps and limited contact areas make handling the stiff protective sleeve more difficult in this situation. The secutex “veloxClip“ is made with a slit along the reverse side. This makes it very flexible in the bending direction. In the longitudinal direction, on the other hand, the protective sleeve keeps its valued properties and remains stiff. This makes it a very simpletouse alternative when lifting loads with more limited contact areas. It is easy to insert through lower gaps and adapts flexibly to loads during lifting.