Wire transmission - Import export

For transmission and distribution of electric power at stationary devices with rated voltage 0,660kV and 1 kV frequency 50Hz. For straining in the air where there is no danger of mechanical damage of the cable, also for laying into channels without influence of stretching forcesInstallation temperature: -150C. The max. allowable core heating temperature in short circuit with duration of not more than 4 seconds must not be above 1600C The conductor is resistant to 98% relative air humidity under +350C conditions Conductive lobe for long-term allowable heating temperature +700CThe aluminum cores with section 2,5-50mm2 inclusive are produced with single wire of 1 class flexibility, 70-240mm2 inclusive with twisted multi-core wires of 2 class flexibility, according to standard 22483-77. Number of cores in the cable 1,2,3,4,5

HDBaseT is a wired solution for signal transmission, such as image and USB signals, in production environments. Interference-free transmission of signals is possible up to a distance of 100 metres. Perfect for users who are not satisfied with the 15 m distance achievable with DP or HDMI. The HDBaseT Box is available as a stand-alone transmitter module, as well as with or without an additional receiver module. The HDBaseT Box can be attached by simply snapping it onto the DIN rail.

• Pliers for electrical installation • With stripping function for single and multi-stranded conductors with 1.5 mm² and 2.5 mm² conductor cross-section • Cutting edges inductively hardened • Precision cutting edge for the finest wires • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of special tool steel, forged, oil-hardened

• Pliers for electrical installation • 4 Functions: cutting - stripping - crimping - bending • With stripping function for single and multi-stranded conductors with 1.5 mm² and 2.5 mm² conductor cross-section • For shortening screws M 3.5 • Cutting edges inductively hardened • Precision cutting edge for the finest wires • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of special tool steel, forged, oil-hardened

• Pliers for electrical installation • 4 Functions: cutting - stripping - crimping - bending • With stripping function for single and multi-stranded conductors with 1.5 mm² and 2.5 mm² conductor cross-section • Cutting edges inductively hardened • Precision cutting edge for the finest wires • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of special tool steel, forged, oil-hardened

Traditional in-pipe temperature sensors, including thermocouples, RTDs, and thermistors, have been essential in various industries for monitoring temperature variations. However, they present several drawbacks. These conventional sensors rely on wired connections for data transmission and power supply, necessitating complex and extensive cabling infrastructure. Cable trays and platforms must be installed to accommodate wiring, increasing costs and architectural requirements. Over time, cables are susceptible to deterioration, leading to signal loss, inaccurate measurements, and potential safety hazards. Regular maintenance is essential to address these issues, adding to operational expenses.

Traditional in-pipe pressure sensors, including strain gauge pressure transducers and capacitive pressure sensors, have been essential in various industries for monitoring pressure variations. However, they present several drawbacks. These conventional sensors rely on wired connections for data transmission and power supply, necessitating complex and extensive cabling infrastructure. Cable trays and platforms must be installed to accommodate wiring, increasing costs and architectural requirements. Over time, cables are susceptible to deterioration, leading to signal loss, inaccurate measurements, and potential safety hazards. Regular maintenance is essential to address these issues, adding to operational expenses. Furthermore, the dependence on external power sources or batteries results in additional maintenance and environmental concerns related to battery disposal.

Moisture meter Name: MTX moisture transmitter for paper Calibrations: Paper Overview The standard MTX provides a current (4-20mA) or voltage (1-5v, 0-2v) output via 4-wire transmission. Your PC or data logger provides the display and processor. Connect with any standard or special application Delmhorst electrodes. The transmitters are ideally suited for applications requiring continuous monitoring of moisture in paper or other hygroscopic materials and interfacing the sensor to a data logger. The transmitters are housed in an ABS wall-mounted case for easy mounting near the sensor or in a control room. SPECIFICATIONS: MTX Moisture range : 4,13% - 8% Paper (21ºC / 70ºF) Specific calibrations : upon request No. of outputs : One Outputs : D.C. Current 4 to 20 mA (Non-linear, inversely proportional) or, Voltage 1-5 VDC, or 0-2 VDC Power requirement : D.C. Voltage between 15 to 30 volts Supply current : Minimum 500 mA Case size (mm) : 83 x 83 x 32 Mounting Base (mm): 108 x 84 Termina

Moisture meter Name: MTX wood moisture transmitter Material: Wood, hygroscopic materials Mc: 6%-60% on wood Calibrations: Wood species Overview The standard MTX provides a current (MTX-C) or voltage (MTX-V) output via 4-wire transmission. Your PC or data logger provides the display and processor. Connect with any standard or special application Delmhorst electrodes. The transmitters are ideally suited for applications requiring continuous monitoring of moisture in wood or other hygroscopic materials and interfacing the sensor to a data logger. The transmitters are housed in an ABS wall-mounted case for easy mounting near the sensor or in a control room. SPECIFICATIONS: MTX-C Moisture range : 6% - 60% Wood (Douglas Fir @ 21ºC / 70ºF) Specific calibrations : upon request Operating temp. range : 0º-70ºC (32º-158ºF) (nominal) No. of outputs : One Outputs : D.C. Current 4 to 20 mA (Non-linear, inversely proportional) or, Voltage 1-5 VDC, or 0-2 VDC Power requirement : D.C. Voltag

M12 AV Adapter 4Pin Aviation Head Female Plug To 2 RCA + DC Male Cable For CCTV Camera Security DVR Microphone Wire high quality Core wire material: pure copper Outer covering material: environmentally friendly PVC Wire outer diameter: 4.8mm Advantages: pure copper core wire, stable and fast signal transmission Purpose: surveillance equipment connecting wire Total length: about 35cm Connector 1: M12 (GX12) 4PIN Female type Connector 2: 2 RCA male (AV) + DC male (5.5 * 2.1mm) Package included: 1 piece