Water proofing - Import export

PVC, T-ball, DN10, solvent socket, from d16 - d50, optical and electrical position indication, manual override, chlorine and sea water proof, protection code IP 65, PN3

Aqua-non AGOFORM's water-proof mats offer the ideal protection against leaks and liquids running out in the sink area. The special semi-spherical shape on the surface allows up to 6 litres of liquid per sq.m to be collected. Removing and cleaning the mat is quick and easy thanks to the special design. The product is available in standard cut sizes of 2000 x 580 mm as well as in special cut sizes for any required format (corner solutions, centre posts) for any carcase dimensions.

Aqua-non AGOFORM's water-proof mats offer the ideal protection against leaks and liquids running out in the sink area. The special semi-spherical shape on the surface allows up to 6 litres of liquid per sq.m to be collected. Removing and cleaning the mat is quick and easy thanks to the special design. The product is available in standard cut sizes of 2000 x 580 mm as well as in special cut sizes for any required format (corner solutions, centre posts) for any carcase dimensions.

Aqua-non AGOFORM's water-proof mats offer the ideal protection against leaks and liquids running out in the sink area. The special semi-spherical shape on the surface allows up to 6 litres of liquid per sq.m to be collected. Removing and cleaning the mat is quick and easy thanks to the special design. The product is available in standard cut sizes of 2000 x 580 mm as well as in special cut sizes for any required format (corner solutions, centre posts) for any carcase dimensions.

The robust, water-proof and impact-resistant construction in combination with easy readable display of Detective+ of Crowcon is a ideal device for portable gas detector For monitoring of a bigger area, up to 12 Detective+ can be connected, whereby in case of alarm of one device all devices will be activated! Easy detection of several gases (up to 4) and due to installation of infrared-sensors (optionally available) sampling of potential high-flammable gases and carbon dioxide is possible! Infrared-sensors are not affected in cases of poisoning of other sensors! Detective+ is based on the successful, worldwide over 55.000 devices sold “Triple Plus”- gas detector! Features of Detective+ Integrated pump (optional) offers rapid response and additional sensor protection Easy readable display Up to 60 hrs. battery operation Very bright red LED-groups provide optival alarm display Extremely loud acoustically alarm tone by emitting siren in all directions (104 dBA @ 1 meter) Sensors...

The MED-approved (wheel) SOLAS person marking light (PML) is a special emergency lighting for life vests. PML is a special emergency lighting for sailors, surfer, and divers (depth up to 100m) with a duration of 8 hours. It is used by French marine and American cost guards, as well. SOLAS PML is particularly suitable for hard-shell jackets and can be easily fixed with the help of clamping device. The Cyalume developed emergency lighting offers special features. It consists of two independent light sources. The white flashing light starts automatically by contact with water; as well it can be activated manually. The burning time amounts to approx. 8 hours. Afterwards, chemical lighting source can be activated through breaking the black protective cover. The chemical light source (green light) has also a burning time of 8 hours, water-proof and durable for 4 years. All chemical light sources are non-toxic and do no pollute the environment! Datenblatt

This bag has the same design with YGC-2101 but is made of water proof fabric. It is lighter than YGC-2101 and hence more suitable for long journey. Dimensions: L x H x D = 30cm x 25cm x 13cm approximately.

2016 polaris slingshot sl WHITE AND RED LOADED. Condition is "Used". Great ride but we are building a house and toys are first to go. This bad boy is loaded and only 9500 miles. CRUIZE CONTROL TILT WHEEL BLUETOOTH PHONE MOUNT CUP HOLDERS CUSTOM SEAT COVERS CUSTOM DASH PADDED COVERS CUSTOM FLOOR MATS (WITH HEAT DEFLECTION) CARBON FIBER COVER KIT (20 PIECES) RED-BLUE-GREEN-WHITE-YELLOW LED OUTSIDE KIT FROM FRONT TO BACK WITH REMOTE. SAME ABOVE FOR INSIDE CUSTOM 20 INCH WHEELS WITH RED TRIM AND LOW PROFILE TIRES ($3200.00) CUSTOM SEE THROUGH TOP THAT IS A T-TOP FOR EASY ENTRY AND HOLD THE SUN BACK. ALSO GIVES MORE HEAD ROOM.($1600.00) CUSTOM RECURVE WINDSHIELD TO LOOK THROGH OR OVER (ADJUSTIBLE) CUSTOM LUGGAGE RACK (DETACHIBLE 6 500WATT WATER PROOF SPEAKERS. 2 TWEETERS. 2 7INCH WOOFERS AND 1000 WATT 6 CHANNEL ($2800.00) BRAKE PADS RE DONE 200 MILES AGO BATTERY 5 DAYS OLD NO CRACKS OR DENTS RUNS AND DRIVES GREAT!!

Railway expansion joint rail with water-proof and dielectric characteristics suitable to absorb longitudinal movements of the decks from 100 to 450 mm and vertical deformations up to ± 50 mm. This type of joint is designed to prevent the ballast penetration in the gap or in any active part of the joint. The RFI-approved series (built according to instruction 44/e) is for displacements from I 00 to 250 mm. Consisting of: • CNR 10018/85-compliant reinforced rubber dielectric modular pads consisting of a central bridging plate and two side elements; • mechanical anchoring system consisting of threaded bars fixed with epoxy resin; • stainless steel protection and sliding plates; • hypalon gutter; • side draining slats for under-ballast infiltration waters; • epoxy mortar transition strip between the joint and the binder. To complete the Beta railway joint the sidewalk and ballast joint is available, consisting of: • reinforced dielectric rubber flange: flat for the sidewalk and shaped fo

Joint 90/65 AS (levelled wings) was specifically designed for highway use within structures creating longitudinal movements of ± 15 (mm), vertical movements up to 10mm. It consists of an extruded rubber bellows, vulcanized to two 65x80x9 mm T-profiles and anchored to the slab by clamps of suitable diameter, placed at centre distance of 240 mm. The extruded rubber, together with the steel profiles it is vulcanized to, makes up a water-tight system and seamlessly covers the entire width of the road bed. Water-tight capacity around the areas close to the joint is ensured by appropriate water-proof materials. POS. DESCRIPTION MATERIAL A 80x80x9 "T" profile S235JR EN 10025 B Vulcanized rubber profile CR 65 Sh/A CNR 10018 C A.M. clampØ16X15 ÷200 FeB 44K D Pavement

Expansion joint specifically designed for highway use within structures creating longitudinal movements of ± 15 (mm), vertical movements up to 10mm. It consists of an extruded rubber bellows, vulcanized to two 80x80x9 mm T-profiles and anchored to the slab by clamps of suitable diameter, placed at a centre distance of 240 mm. The extruded rubber, together with the steel profiles it is vulcanized to, makes up a water-tight system and seamlessly covers the entire width of the road bed. Water-tight capacity around the areas close to the joint is ensured by appropriate water-proof materials. POS. DESCRIPTION MATERIAL A 65x80x9 finger "T" profile S235JR EN 10025 B Vulcanized rubber profile CR 65 sh/a cnr 10018 C A.M. clamp Ø 16x150÷200 FeB 44K D Construction joint Fibre-reinforced cement mortar E Gutter Hypalon F "L" shaped drainage profile X5 CrNi 1810-UNI 8317 G Epoxy-resin mortar H Road surface