Technical production - Import export

At each stage of research and development throughout your project, we hold strategic planning meetings with the design office and the manufacturing workshops, so that we can fully capitalise on our internal theoretical and practical skills, as well as having co-engineering discussions with your teams. The close collaboration between our development and manufacturing teams enables us to combine theoretical creativity and best practice.. All technical solutions undergo a practical feasibility and optimisation analysis upstream in the manufacturing phases. The various solutions studied are reviewed again, with the final decision being made according to the solution that offers the best balance between technicality, productivity, efficiency and cost.

In close collaboration with your technical and production teams, we target equipment whose cost-effectiveness can most be improved through digitisation. We define the profitability objectives, and then adapt your production facilities and roll-out the most appropriate technical solutions in order to achieve them. Analytics & data interpretation We install the digital tools required for: continuous collection of the generated data analysis and synthesis of the information collected at regular intervals interpretation of the results via secure remote connections at your facilities. Based on the findings, and in close collaboration with your maintenance teams, we organise the following: preventive and/or corrective maintenance programmes actions for improvement follow-up of these actions and the financial gains generated If required, we can perform all the operations needed to support your teams.

Our precision balls are high technical products whose quality is non-negociable. Raw material selection, dimensional control, storage and packaging are all managed to perform the best quality customer is waiting for. We are able to propose precision balls in various raw material such as steel, stainless steel, tungsten carbide, ceramic, plastic, bronze, brass but also aluminum, hastelloy, Inconel, monel, titanium, tantale and duplex etc

Our precision balls are high technical products whose quality is non-negociable. Raw material selection, dimensional control, storage and packaging are all managed to perform the best quality customer is waiting for. We are able to propose precision balls in various raw material such as steel, stainless steel, tungsten carbide, ceramic, plastic, bronze, brass but also aluminum, hastelloy, Inconel, monel, titanium, tantale and duplex etc

Through a representative office in Hong Kong, CIC supports the often difficult procurement of technical products from China, e.g.: efficient search for suitable suppliers direct, native speaker contact with the producer Contract design and processing Supplier Qualification Quality monitoring Logistics control ZURÜCK

In addition to our wide range of oils, lubricants and fluids, we supply your business with technical accessories for smooth operation in the workshop, factory and production. Our technical products meet the highest quality standards and are produced by renowned brands. For the optimum selection of oil pumps, grease guns and storage technology for oils, greases and fluids, our specialist advisors will support you from the very first minute.

Production of non-standard products according to technical specifications provided by the customer. "Astra" has perfect welding and metal working equipment in-house which could be applicable not only for cylindrical tanks but also for various shapes and various purpose equipment - just give us a hint!

Main Technical Data Production Speed Up to 1000 pcs/min Production Linear Speed 280 m/min max Efficiency 85-90% Product Width (min-max) 70-115 mm w/o wings, up to 165 including wings Product Length (min-max) 180-320 mm Required Air Pressure 6 bar Noise Lower than 90 dBa Basic Machine Features • Top sheet with NW side barriers • Fluff core with short ADL layer • Core anatomic shaped according to customer design • Core embossing according to customer design • Back sheet • Release tape glued on line • Edge sealing & contour cut out according to customer design • Wing tape glued on line Optional Machine Features • Thermo sealing for three pieces top sheet • Videojet printing on ADL • Individual easy wrap fold • Pouch tape • Bypass for straight product

Adult Diaper AD−250 Main Technical Data Production speed Up to 250 pcs/min Production linear speed 200 m/min−max Efficiency 85-90% Product width (min−max) 480-800 mm Product length (min−max) 710-975 mm Required air pressure 6 bars Required air flow Approx. 8,000 Nl/min Noise Lower than, 85 dBA Basic Machine Features Full servo technology Electronic job change High quality multi-zone forming system with 2D/3D core design Inline & stand alone unwinders Automatic splicing units “ZERO SPEED” Automatic web guiding systems Full feature product User-friendly HMI panel Bi & tri-folding systems Horizontal stacking & counting system Advanced QCS system Safety measures conforming to “CE” standards Optional Machine Features Waist band application Long life carbide die cutters Dual core design

Main Technical Data Production speed Up to 600 pcs/min Production linear speed 300 m/min−max Efficiency 85-90% Optional Machine Features Low waste side panels application Front ears application QCS vision system Product width (min−max) 250-380 mm Product length (min−max) 370-600 mm Required air pressure 6 bars Required air flow Approx. 6,000 Nl/min Noise Lower than, 85 dBA

For the production and application of industrial goods in car industry we follow the SRPS ISO 9001-2008 ISO norm as well as TRV norm.This understands the specific application during technical production and personal responsability in the use of specific materials for the production of goods used in car industry. We produce air tubes, fuel tubes and oil tubes, shock absorbers, bearers, membranes, floor mats, protection caps resistant to grease and oils... Hemogum can meet car industry customers in production of articles for all renowned car manufacturers. We have the necessary equipment that helps us guarantee high quality, uniformity, excellent physical characteristics and high dimensional precision of our articles. For the production of car industry goods we apply the NR, CR, SBR, NBR, MWQ, FWK

DSEC's commitment on the construction of Biodiesel plants is based on a very specialized technical knowledge of the Biofuels production processes; in this article you will find a more detailed understanding about the process of Methanol Rectification and Glycerin Purification. Methanol Rectification The methanol coming from the upstream process units is fed to the rectification column. The methanol is recycled to reactor loop circuits.

is an ester of the acetic acid and ethanol. That is why it has also following names: Acetic acid ethyl ester or acetic ester. It can also be obtained from acetaldehyde. For the industrial use ethyl lactate is obtained from lactic acid. Mostly processed by fermentation of sugar. Therefore it is a salt of lactic acid. The chemical term for the substance is ethyl (S)-2-hydroxypropionate. The product is a clear liquid, smelling like glue. It is easily soluble in water and organic substances. The dangerous goods term is UN 1192 Ethyllactat,3,III,(D/E). The product is availabe for the food (FCC) and technical sector. In this product sector we work together with the european manufacturers Corbion / Purac (Purasol ® ) and Galactic (Galaster ™).

TECHNICAL SPECIFICATIONS: Product to be packed: Yogurt, Lala, Sour Cream, Mayonnaise, Mustard Paste, Honey Dosing volume: 200-3000 ml Speed: up to 20 tubs/min Cup material: Plastic tubs Lid material: Aluminum Voltage: 220/380 V, 50 Hz Power: 0.6 kW/ 1kW Dimensions: 1600 x 900 x 1400 mm Weight: 150 - 500 kg BASIC SCOPE OF SUPPLY: De-nesting of tubs from magazine to transfer mechanism Linear movement of tub Filling of set product volume Placing of plastic lid on tub Leak-proof closing of plastic lid Date coding by contact type ink printer on self-adhesive label Transfer of filled tub on table for ready products TUB FEEDING UNIT Operator puts stack of tubs into infeed magazine (capacity of infeed magazine is approx. 20 pcs.). Tub feeding unit provides piece by piece feeding of tubs on the conveyor. Tub feeding unit provides possibility of stacking for three tub sizes (for 200 ml, 500 ml and 3000 ml).

TECHNICAL SPECIFICATIONS: Product to be packed: Yogurt, Lala, Sour Cream, Mayonnaise, Mustard Paste, Honey Dosing volume: 150-500 ml Speed, max.: 55-60 cups/min Cup material: Plastic cups Lid material: Aluminum Voltage: 220 V, 50 Hz Power: 2 kW Compressed air, max.: 900 litres/min. at 6 bar Dimensions: 2400 x 1200 x 1900 mm Programmable Logic Controller: Unitronics (Israel) BASIC SCOPE OF SUPPLY: Entire frame & guards of the machine is made of stainless steel SS304 with protective acrylic covers and door handles Parts which are in contact with product made of stainless steel SS316 Drive unit for cup & lid-holder disc (there are pins around the cavity on rotary turret to hold the lids. The cups magazine has a step to hold the cups during discharge) Piston filler for viscous products Cup feeder to turret with vacuum cup Magazine for top aluminum lid loading & lidding unit (precut lids) Lid sealing device “NO cup – NO filling” system Inkjet printer for date coding

TECHNICAL SPECIFICATIONS: Product to be packed: Yoghurt, Juice, Sour Cream, Mayonnaise, Mustard Paste, Honey Dosing volume: 100-500 ml Speed: up to 25 cups/min Cup material: Plastic cups Lid material: Aluminum Voltage: 220 V, 50 Hz Power: 1 kW Dimensions: 1200 x 1000 x 1800 mm Programmable Logic Controller: Unitronics BASIC SCOPE OF SUPPLY: Entire frame & guards of the machine is made of stainless steel with protective acrylic covers and door handles Product hopper without heating and agitator Magazine for cups Magazine for top aluminium lid Complete set of changeable rings for cups with neck Ø 75 mm and 95mm OPTIONAL EQUIPMENT FOR PACKING OF SPECIALIZED PRODUCTS: –Modified filler design for working with products having suspended particles –Product hopper with heating jacket and agitator (for such products as jam, honey, peanut butter, etc.) –Unit for lifting and rotation of cup for uniform filling for high viscous products

Cleaner, solvent-based or without labelling obligation, technical and medical products, cosmetic products in different packagings, pump sprays, canisters, barrels

Gaskets are necessary to guarantee watertightness of the tunnel and avoid water infiltration in the bridge segments. Almost 20 million metres of gaskets supplied for railway, underground, road and hydraulic tunnels prove FIP INDUSTRIALE technical skills and production capacities. FIP INDUSTRIALE gaskets are made of EPDM, CR-SBR, NBR and HYDROEXPANSIVE RUBBER. FIP INDUSTRIALE manufactures both compact gaskets with hardness from 50 to 80 Shore A, and foam gaskets with various densities. The gaskets can be supplied in continuous extrusion or in frames with 4 or 6 corners moulded to the profile. EPDM water-tight gasket. Durability and unchangeability over time of FIP INDUSTRIALE gaskets are guaranteed by the special rubber compounds used and by severe laboratory testing simulating actual service conditions. The dimensions of the gasket, the profile, the type of rubber and its physical and mechanical characteristics can be specified at the design stage based on the service conditions: