Tapping screws - Import export

With our delivery program “Screws for direct screwing” we deliver a great variety of thread rolling screws in different implementations. In doing so we realize small lot sizes and short-term delivery dates. Upon request we also introduce customer-oriented warehousing also in your company. Apart from the many advantages you can save time and money. We provide: KTG screws for thermoplastic materials: single pass thread or double pass thread (high/low); head shapes with cross or 6-star (similar Torx). Tapping screws: longitudinal slot, cross slot, cross-head-combination slot or 6-star (similar Torx). DIN 7981, 7982, 7983 or to the new ISO standards; special tip-styles, e.g. with with pressed washer. Combination screws with undetachably washers: According to DIN 6901. Self-tapping screws: According to DIN 7500. Fields of application: For thermoplastics, duroplastics, light alloys, metal compounds. Industrial consumers: Electrical industry, plastics processing industry...

Large Quantities: produced as cold formed parts (so-called multi-station presses), which require high output volumes in order to achieve a reasonable price parts Small Quantities: Produced as turned parts - the economic adjustment to small batch sizes Fields of application: For thermoplastics, duroplastics, light alloys, metal compounds. Industrial consumers: Electrical industry, plastics processing industry, sheet metal processing industry, telecommunications, tank- and container construction.

The economic adjustment to small batch sizes, we meet with our turned parts for the direct assembly in plastics and die-cast products. Any thread forms such as, thread-tapping (DIN7500), thread cutting (DIN 7513-7516) or KTG for direct screw in plastics are realized cost-effectively. Advantage is the elimination of high tooling costs, since no counter-thread in the workpiece (eg threaded inserts, nuts, etc.) is required because the direct assembly takes place directly into the workpiece. Only a given tube is required in order to screw it directly. Our turned parts replace previously cold formed parts used (so-called multi-station presses) which require high output volumes in order to achieve a reasonable price parts.

Ready to install sprockets with hub on one side for DIN ISO 606 roller chains. Teeth are milled and inductively hardened. Keyway acc. to DIN 6885 / BS 4235. The keyway is aligned with the tooth tip. With two grub screws. One tapped hole aligned with the keyway centre, the other offset by 90°.

These supports are placed under long or thin workpieces to prevent vibration or bending during milling, drilling, grinding or shaping operations. The support can be accurately placed without the need to reach under the workpiece. The support pin contacts the workpiece under light pressure. It can be tightened in any position. Various types of pins can be screwed into the tapped hole in the thrust pin to adapt the support height. The supports 02380-075, 02380-150 and 02380-170 have only 1 slot.

Self-tapping screw for fastening, connecting sheet metal and metal profiles up to 0.9 mm Head: hemispherical with press washer, Philips slot No2, M = 4.5 5.1

Washer for roofing screws With EPDM rubber gasket, galvanized / has no official standard The washer for the roofing screw is equipped with an EPDM rubber gasket made of ethylene, propylene, diene, methylene. It is not used without a self-tapping screw. The metal part of the washer is coated with white zinc. When painting the roofing screw, the metal part of the washer surface is painted. Coating of the metal part: white zinc. Gasket material: neoprene or EPDM E - ethylene, P - propylene, D - diene, M - methylene. Attention! The thickness of the EPDM rubber gasket on the washer is 2.4-2.8 mm.

Roofing self-tapping screw for metal DIN-EN-ISO 15480 (old - DIN 7504-K) with an EPDM washer 2.4-2.8 mm thick Standard Head: hexagonal with a shoulder, , turnkey 8 (D-5.5) or 10 (D-6.3) mm, a marking mark in the form of the letter "X" is stamped on the cap

Roofing self-tapping screw on wood with a 2.4-2.8 mm thick EPDM washer Head: hexagonal with a shoulder, 8 mm turnkey, a marking mark in the form of the letter "X" is stamped on the cap

Self-tapping screw with a drill bit for connecting metal profiles DINEN-ISO 15480 standard (old - DIN 7504-K) Head: hexagonal with a shoulder, , turnkey 8 (4.8 x and 5.5x) or 10 (6.3x) mm, a marking mark in the form of the letter "X" is stamped on the cap

Self-tapping screw for fastening, connecting sheet metal and metal profiles up to 0.9 mm Head: hexagonal with a shoulder, straight slot

Self-tapping screw for fastening, connecting sheet metal and metal profiles up to 0.9 mm Head: semi-cylindrical with self-locking notches, Philips No2 slot, M = 4.5-5.1

Self-tapping screw for fastening, connecting sheet metal and metal profiles up to 2 mm Head: hemispherical/semi-cylindrical, Philips No2 slot

Self-tapping screw for fastening, connecting sheet metal and metal profiles up to 2 mm Head: hemispherical with press washer, Philips No2 slot, M = 4.5-5.1

Self-tapping screw for fixing gypsum fiber boards Head: countersunk with notches for cutting, Philips slot No2, M = 4.5-5.1

Self-tapping screw for fixing drywall to metal profiles up to 2-3 mm Head: countersunk, Philips No2 slot, M = 4.5-5.1

Self-tapping screw for fixing drywall, frequent carving (on metal)

for square holes For the mounting of parts with metric screws on components with holes. The nut tapping is done by the screw. Permits blind assembly and prevents nut rotation. Material: PA 6.6 / PA 6 Colour: natural / black

The design includes a box for connecting FTP and standard camera wires as well as a bracket for attaching input cable. The camcorder is attached directly to the box with self-tapping screws.

Self-tapping screws, Self-drilling screws, Thread forming screws - Self-tapping screws - BN 941

Self-tapping screws, Self-drilling screws, Thread forming screws - Thread cutting screws - BN 1014

Self-tapping screws, Self-drilling screws, Thread forming screws - Thread forming screws - BN 2724

Self-tapping screws, Self-drilling screws, Thread forming screws - Self-drilling screws ecosyn -drill - BN 10318