Swivels - Import export

Swivel

Swivel

Fitted with smoothrunning plain bearings. Not suitable for swivelling while under load. When lifting the load, the safety latch closes automatically and is securely locked by a locking mechanism at the rear of the hook. To open the latch, the locking mechanism must be unlocked manually. The swivel hooks correspond to the Machinery Directive and are BG certified (H stamp). Temperature range From 40°C to 200°C = 100% permissible load Up to 300°C = 90% permissible load Up to 400°C = 75% permissible load

Compact and light design, full loading on all sides. 4x safety factor against breakage in all loading axis. Rotatable 360°. Link swivel range max. 180°. The ball bearing allows the ring to rotate even under load. Lifting or securing loads, swivel rings have many uses. For the loading capacity to be valid it must be ensured that the ring is in line with the load. The swivel face must lie flat on the support beam and the screw must always be screwed in fully.

Body tempered. Ball hardened (50 - 55 HRC). Note: Self-aligning pads serve as stops, supports and thrust pads in fixture construction. They can also be installed in existing clamping devices, e.g. arness clamps. Ball is secured against rotation. Drawing reference: Form C: male thread, smooth flattened ball Form F: male thread, serrated flattened ball

hydraulic backhoe with gripping function for Ferrum DM yard loader / wheel loader suitable for the models from the list below 3in1, backhoe excavator with swivel function and gripper in one unit. The best excavator attachment of all one of the most versatile attachments for wheel loaders. excavation and side excavation placement, Relocate grabbing tree trunks and other grabby items, Dredging up to 2 meters deep Can also be used as a small crane with slewing function. Simply slip or hang hooks from the outside of the excavator bucket. Significantly expands the effective radius of the wheel loader Various lengths and bucket widths available. Here standard version with total length of shovel open 250cm, shovel width backhoe 270mm, max. digging depth 200cm requires 3rd & 4th control circuit. Can also be used with 5 control circuits - simply order the wheel loader to fit when ordering from us requires 3rd control circuit for opening and closing the excavator bucket

Hydraulic crane arm extra long with swivel function for Ferrum DM yard loader / wheel loader suitable for with connection for quick coupler requires 3rd control circuit to extend & retract the hook Requires 4th control circuit to swivel the crane arm Lifting power depends on the own weight and lifting power of the wheel loader model used. Different lengths available. Standard length here: 3.00 m retracted and 4.50 m extended Pay attention to leverage Combination with calibrated or uncalibrated scales possible, e.g. crane scales Our recommendation: from model FERRUM DM416 x4 and larger Attention: extra long trunk, you can do even more with it In response to a customer request, we were commissioned to build a simple, inexpensive crane arm with a telescopic function, which we could combine with the versatile FERRUM wheel loaders.

hydraulic backhoe with swivel function for Ferrum DM yard loader / wheel loader suitable for models see listing requires 3rd & 4th control circuit requires 3rd control circuit for swiveling requires 4th control circuit for opening and closing the excavator bucket with connection for quick coupler Recommended for: Wheel loader Ferrum DM312 x4 Ferrum DM416 x4 V2 Ferrum DM522 x4 Ferrum DM430 x4 DLZ Ferrum DM625 x4 Ferrum DM732 x4 Court loader: Courtyard loader FIRST 12 Courtyard loader FIRST 16

Our assortment of threaded screw fittings ranges from connectors, double threaded nipples, counter nuts and bushings to reducing nipples, pipe double nipples, hose sleeves and pivoting bushings and up to bulkhead fittings, union nuts, extension pieces, end caps and locking screws. We also offer various fittings made of steel and malleable cast iron as well as assortment boxes with a chosen selection of screw fittings.

Our assortment of threaded screw fittings ranges from connectors, double threaded nipples, counter nuts and bushings to reducing nipples, pipe double nipples, hose sleeves and pivoting bushings and up to bulkhead fittings, union nuts, extension pieces, end caps and locking screws. We also offer various fittings made of steel and malleable cast iron as well as assortment boxes with a chosen selection of screw fittings.

The round slings comply with DIN EN 14922. They are made of highstrength endless polyester fibre cords. These polyester fibre cords are protected by a sturdy and seamlessly woven polyester sleeve. This sleeve surface is also impregnated with polyurethane to make it abrasionproof. The working load limit (WLL) and the cord tonnage (tonne capacity per cord) are either woven into or printed on the protective sleeve of the sling. The safety label with the CE mark and technical data is firmly sewn onto the sling. The colour of the round sling corresponds to the colour code scheme for load capacities of textile type slings. These round slings have high UV resistance and low moisture absorption. These round slings carry the CE mark according to the European machinery directive.

Round sling hooks for quick suspension of textile lifting equipment such as hoist belts or round slings. The round sling hook is fitted with a robust, forged safety latch. All edges are rounded to protect the textile slings. The colour of the round sling hook corresponds to the colour code assigned to textile lifting equipment that signifies the permissible loads. The round sling hooks correspond to the Machinery Directive and are BG certified (H stamp). Temperature range From 40°C to 200°C = 100% permissible load Up to 300°C = 90% permissible load Up to 400°C = 75% permissible load

Grade 10. Plasticcoated, red. Latch forged and electro zincplated. Slip hooks with forged latch. The hooks correspond to the Machinery Directive and are BG certified (H stamp). Temperature range From 40°C to 200°C = 100% permissible load Up to 300°C = 90% permissible load Up to 400°C = 75% permissible load

Form A: Ball element case-hardened and black oxidised. Form B: Bright. Form C: Ball element case-hardened and black oxidised. Form D: Ball element bright. Form G: Ball element case hardened and black oxidised, foot with anti-slip plate. Note: The anti-slip plate absorbs vibrations and prevents the swivel foot slipping The loading indicated in the table is a recommendation up to which permanent static load the swivel foot can be used.

Category Compressed-air technology / Compressed-air couplings and accessories / Plug / Swivel joint plug Product number supplier 301081

Ball element case-hardened steel. Thrust pad ETG 100 steel.

Material: Housing thick steel plate. Tyres steel-wire reinforced elastic solid rubber. Wheel body welded steel. Version: Housing press formed. Reinforced fork, base plate and centre pin. Double ball bearing with hardened shells in the castor head. Precision ball bearings in the wheels. Note: These castors are particularly impact and shock proof and assure a high service life. Wheel axle bolted.

Material: Housing steel plate. Wheels with thermoplastic rubber tread. Wheel body polypropylene. Version: Housing press formed. Double ball bearing in the castor head. Plain bearing in wheels. Note: Wheel axle threaded. Swivel and fixed castors with bolt hole. Electrically conductive wheels, non-marking grey. The ohmic resistance of the wheel is less than 10⁴Ω. Application: Electrically conductive wheels on swivel and fixed castors are used to protect against electrostatic discharge generated by transport equipment or the transported goods. Damage to sensitive goods and painful electrostatic shocks to the personal is so prevented.

Snap hook with movable, round swivel

Panic hook with movable, straight swivel

Snap hooks made from solid brass

Snap hooks made from solid brass

Snap hooks made from solid brass

Snap hooks made from solid brass

The double-sided clamp straps are ideal for series clamping. For special applications, the clamping flange can be replaced with another clamping flange by loosening the clamping screw. The clamping flange must always have a contact point on both sides. Functional principle: 1. Use a hand-held or electric tool to tighten the hexagon head bolt (make sure that the maximum tightening torque is not exceeded). When clamping, the clamping flange automatically turns by quarter of a rotation and starts the clamping stroke. 2. Use reverse procedure to loosen the hexagon head bolt. The clamping flange automatically returns to its starting position (the set screw can be used to change the position of the clamping flange). Drawing reference: 1) Hexagon head bolt 2) Slotted round nut 3) Set screw

Misc. snaps made from zinc die cast and malleable cast iron

made from zinc die cast and malleable cast iron

made from zinc die cast and malleable cast iron