HEAVYDRIVE GMBH
Germany
Vacuum suction systems with special plates for rough surfaces such as stone slabs, plastic panels, wooden panels, wood based boards and much more up to 6000 kg.
H.B.A STEENS ILMA TRADING BV
Netherlands
Double A Copy Paper 80 / 75 GSM / 70 GSM. Weight: 80 GSM Sheet Size: 210mm X 297 Brightness: 102-104% International Size A4. Quality: Imported 100% Virgin Pulp Whiteness High Speed 100ppm Laser Capable, Inkjet, Fax Capable. Thickness: 103-110 UM Surface roughness TS ml / min: from 75 to 175 Surface roughness BS ml / min: 100-200 Bending stiffness. MD> 110 Bending stiffness CD> 50 CIE whiteness: 148 to 152 Cobb Test: 27-33 G / m2 27-33
H.B.A STEENS ILMA TRADING BV
Netherlands
bpecmcation : Navigator A4 Copy Paper 80 / 75 GSM / 70 GSM. Weight: 80 GSM Sheet Size: 210mm X 297 Brightness: 102-104% International Size A4. Quality: Imported 100% Virgin Pulp Whiteness High Speed 100ppm Laser Capable, Inkjet, Fax Capable. Thickness: 103-110 UM Surface roughness TS ml / min: from 75 to 175 Surface roughness BS ml / min: 100-200 Bending stiffness. MD> 110 Bending stiffness CD> 50 CIE whiteness: 148 to 152 Cobb Test: 27-33 G / m2 27-33
WIWOX GMBH SURFACE SYSTEMS
Germany
The performance and aggressiveness of brown fused alumina type WIWOX® NK produces a strong removal effect as well as a uniformly structured surface. The high TiO₂ content makes it extremely hard and tough, whereby the surface roughness can be greatly changed. Also available as microcorn with a precise grain distribution up to 3 μm.
DIERMEIER ENERGIE GMBH
Germany
High Temperature Grease (05/20/2021) High temperature multi-purpose grease Description Castrol High Temperature Grease is a high-performance lithium complex grease that is characterized by its excellent high-pressure properties. It contains a high-quality base oil based on mineral oil, to which corrosion protection inhibitors and antioxidants are added in a balanced ratio. The high resilience and good wear protection of Castrol High Temperature Grease goes far beyond the standard of conventional lubricating greases. These good properties result from the effectiveness of the innovative additive package developed specifically for Castrol High Temperature Grease . By smoothing the surface roughness on the friction surfaces , their load share increases . This creates increased safety with regard to the load capacity of the bearings with reduced friction.
AAAGILER GMBH
Germany
Floor marking for outdoor area / car park has been especially developed as a self-adhesive floor marking tape for outdoor use on uneven / rough surfaces with very high temperature resistance, e.g. for internal car parks, for car park marking in outdoor areas, outdoor storage as well as internal road marking.
E.H.W. WORLDWIDE
Netherlands
Navigator A4 Copy Paper 80 / 75 GSM / 70 GSM. Weight: 80 GSM Sheet Size: 210mm X 297 Brightness: 102-104% International Size A4. Quality: Imported 100% Virgin Pulp Whiteness High Speed 100ppm Laser Capable, Inkjet, Fax Capable. Thickness: 103-110 UM Surface roughness TS ml / min: from 75 to 175 Surface roughness BS ml / min: 100-200 Bending stiffness. MD> 110 Bending stiffness CD> 50 CIE whiteness: 148 to 152 Cobb Test: 27-33 G / m2 27-33 Navigator A4 Copy Paper product was distributed over 100 points globally is one of the markets of Navigator A4 Copy Paper, it is also expected be the future growth.
UFTER HOLDING B.V
Netherlands
Navigator A4 Copy Paper 80 / 75 GSM / 70 GSM. Weight: 80 GSM Sheet Size: 210mm X 297 Brightness: 102-104% International Size A4. Quality: Imported 100% Virgin Pulp Whiteness High Speed 100ppm Laser Capable, Inkjet, Fax Capable. Thickness: 103-110 UM Surface roughness TS ml / min: from 75 to 175 Surface roughness BS ml / min: 100-200 Bending stiffness. MD> 110 Bending stiffness CD> 50 CIE whiteness: 148 to 152 Cobb Test: 27-33 G / m2 27-33
UFTER HOLDING B.V
Netherlands
Double A Copy Paper 80 / 75 GSM / 70 GSM. Weight: 80 GSM Sheet Size: 210mm X 297 Brightness: 102-104% International Size A4. Quality: Imported 100% Virgin Pulp Whiteness High Speed 100ppm Laser Capable, Inkjet, Fax Capable. Thickness: 103-110 UM Surface roughness TS ml / min: from 75 to 175 Surface roughness BS ml / min: 100-200 Bending stiffness. MD> 110 Bending stiffness CD> 50 CIE whiteness: 148 to 152 Cobb Test: 27-33 G / m2 27-33
SOOCHOW ADVANCE INDUSTRIES CO., LTD.
China
knuckle flanged housing material: aluminum alloy 6061 size: diameter 4.25 +/-0.01 inch, 2.50 +/-0.01 inch, height 1.50 +/-0.01 inch 4 through holes diameter 0.332 +/-0.005 inch surface roughness Ra 1.6 Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
POLIFILM
Belarus
provides a connection point with a rough and fleecy surface, preventing displacement of the glued ones; has high flexibility and elasticity for fixing rough surfaces; is easy to use, environmentally friendly and easy to dispose of; connects elements together, keeping their fragile parts intact. for gluing materials that are subject to heavy loads; for laying floor coverings; for temporary restoration work; for decoration of exhibition premises; for installation of materials that must remain motionless even under mechanical influence; for gluing various rolled materials during their production, including on continuous conveyors. Quantity pcs. 64
MINEBEA INTEC BENELUX
Belgium
Protected against corrosion and extremely durable, designed according to hygienic standards and equipped with a proven measurement principle for safe and reliable weighing results, the PR 6212 load cell enables accurate measurements in a variety of different weighing applications. - High corrosion resistance - Design according to hygienic standards - High measurement accuracy, C1 - Laser inscription The advanced stainless steel, which is unique in the weighing industry, reduces downtime and costs on long term basis. Due to the upside-down mounting of the load cell in the PR 6012 mounting kits, the hygienic construction and the reduced surface roughness, cleaning times are minimized. Additionally an effective corrosion protection due to aggressive cleaning agents and other liquids could be realized.
KB ROLLER TECH KOPIERWALZEN GMBH
Germany
Transport and drive rollers must provide precise transport of the print media in the digital printing process. This is especially true for wide format inkjet printers. Tracking lines, artifacts on the printout, or paper feeding failures are not accepted by the end-user. Our transport rollers are subject to the highest quality standards in respect to: Perfect, defect-free surfaces Precisely defined surface roughness High friction stability over life Tight tolerances in all dimensions
KB ROLLER TECH KOPIERWALZEN GMBH
Germany
The latest generation of color laser printers have four toning stations (CMYK). Paper passes all four stations in one cycle which enables higher print speeds. This design requires precise positioning of the belt with respect to the paper during the toning cycle. This need defines the properties of a seamless belt for a perfect printout: Perfect, defect-free surface Tight tolerances of diameter, length, width and surface roughness Precisely defined electrical conductivity over the entire belt surface KB RollerTech`s capabilities: Diameters: up to 1,000 mm Width: up to 600 mm Thickness: 50 - 100 µm (±10%) Electrical properties: 1E5 - 1E16 Ohm cm Roughness: < 1,0 Ra Primary and Transfer Charge Rollers Charge rollers are critical for long lasting, high quality printouts in laser printers and copiers. KB Roller Tech’s special compounds enable charge rollers to maintain continuously stable electrical properties. Primary charge rollers are mostly soft coated rollers with sensitive surf
NPA NORDISKT PAPPER
Sweden
Colored paper with half rough surface which gives a perfect surface for drawing, painting, and different creative purposes. Made of virgin fibers, ideally used for cutting out figures, drawing and painting. https://nordisktpapper.se/en/product-category/tonpapper/
LLC KAMRUD-AGRO-TECHNO
Ukraine
(Magnet Cleaner) is designed for cleaning flax seeds and herbs from hard-separated seeds, weeds that have a rough surface. We deliver our equipment to any country in the world.
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
1.) Shaft (1x): quality: Cf53 (1.1213) hardened: 59-65 HRC Rht min.0,6 grounded tol. h6 (0-11my) length: up to 1000mm (please take your needed length up to 1000mm in the field "length in mm") surface roughness: Ra <= 0,3 weight: 0,89kg/m straightness: 0,2mm/m
Do you sell or make similar products?
Sign up to europages and have your products listed
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description Shaft support rail unit SMTSU 12-W length precisely lengths to the millimetre, choosable up to 6000mm, with rail in aluminium and shaft in hardened, quality: stainless steel X46Cr13 (1.4034) This system you can combined with all open (look the "o" in the name of article) housing units, see categorie: http://lineareasy.com.de/shop/index.php/cat/c12_Gehaeuseeinheiten.html Urgent notes for order: The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. The type SMTSU will be not mounted !. Product data unit: Abmessungen: Type Ød h +/-0,15 H1 A A1 W M Ød1 e T Gew./kg* SMTSU-12 12 14,5 3 11 6,0 5,4 M4 4,5 15,5 75 0,44 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section T5 min = 20mm the weight of the unit you´ll see down on this side material of shaft support: Aluminium Product data shaft: Material shaft: stainless steel X46Cr13 Hardened: 52-56 HRC Rht min.0,6 Grounded Tol. h6 (0-11my) Surface roughness: Ra <= 0,3 Weight (shaft only): 0,89kg/m Straightness:0,2mm/m Predrilled: see the table Chamfer: on both sides of the shaft appr. 1 - 2mm x 30° (depending the diameter of the shaft)
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description Shaft support rail unit SMTSU 12-W length precisely lengths to the millimetre, choosable up to 6000mm, with rail in aluminium and shaft in hardened, quality: Cf53 (1.1213) This system you can combined with all open (look the "o" in the name of article) housing units, see categorie: http://lineareasy.com.de/shop/index.php/cat/c12_Gehaeuseeinheiten.html Urgent notes for order: The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. The type SMTSU will be not mounted !. Product data unit: Dimensions: Type Ød h +/-0,15 H1 A A1 W M Ød1 e T Gew kg SMTSU-12 12 14,5 3 11 6,0 5,4 M4 4,5 15,5 75 0,44 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section T5 min = 20mm the weight of the unit you´ll see down on this side material of shaft support: Aluminium Product data shaft: Material shaft: Cf53 Hardened: 59-65 HRC Rht min.0,6 Grounded Tol. h6 (0-11my) Surface roughness: Ra <= 0,3 Weight (shaft only): 0,89kg/m Straightness:0,2mm/m Predrilled: see the table Chamfer: on both sides of the shaft appr. 1 - 2mm x 30° (depending the diameter of the shaft)
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description Shaft support rail unit SMTSN 12-T2-W length precisely lengths to the millimetre, choosable up to 6000mm, with rail in aluminium and shaft in hardened, quality: stainless steel X46Cr13 (1.4034) This system you can combined with all open (look the "o" in the name of article) housing units, see categorie: http://lineareasy.com.de/shop/index.php/cat/c12_Gehaeuseeinheiten.html Urgent notes for order: The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. The type SMTSN we deliver assembled to you. Product data unit: Dimensions: Type d A h +/- 0,15 V N1 N2 d1 d2 W (°) E T weight./kg* SMTSN-12 12 40 22 5 8,0 5,0 4,5 4,5 5,8 50 29 120 0,52 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section T5 min = 20mm the weight of the unit you´ll see down on this side material of shaft support: Aluminium Product data shaft: Material shaft: stainless steel X46Cr13 Hardened: 52-56 HRC Rht min.0,6 Grounded Tol. h6 (0-11my) Surface roughness: Ra <= 0,3 Weight (shaft only): 0,89kg/m Straightness:0,2mm/m Predrilled: see the table Chamfer: on both sides of the shaft appr. 1 - 2mm x 30° (depending the diameter of the shaft)
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description Shaft support rail unit SMTSN 12-T1-W length precisely lengths to the millimetre, choosable up to 6000mm, with rail in aluminium and shaft in hardened, quality: stainless steel X46Cr13 (1.4034) This system you can combined with all open (look the "o" in the name of article) housing units, see categorie: http://lineareasy.com.de/shop/index.php/cat/c12_Gehaeuseeinheiten.html Urgent notes for order: The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. The type SMTSN we deliver assembled to you. Product data unit: Dimensions: Type d A h +/- 0,15 V N1 N2 d1 d2 W (°) E T weight./kg* SMTSN-12 12 40 22 5 8,0 5,0 4,5 4,5 5,8 50 29 75 0,52 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section T5 min = 20mm the weight of the unit you´ll see down on this side material of shaft support: Aluminium Product data shaft: Material shaft: stainless steel X46Cr13 Hardened: 52-56 HRC Rht min.0,6 Grounded Tol. h6 (0-11my) Surface roughness: Ra <= 0,3 Weight (shaft only): 0,89kg/m Straightness:0,2mm/m Predrilled: see the table Chamfer: on both sides of the shaft appr. 1 - 2mm x 30° (depending the diameter of the shaft)
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description Shaft support rail unit SMTSN 12-T2-W length precisely lengths to the millimetre, choosable up to 6000mm, with rail in aluminium and shaft in hardened, quality: Cf53 (1.1213) This system you can combined with all open (look the "o" in the name of article) housing units, see categorie: http://lineareasy.com.de/shop/index.php/cat/c12_Gehaeuseeinheiten.html Urgent notes for order: The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. The type SMTSN we deliver assembled to you. Product data unit: Dimensions: Type d A h +/- 0,15 V N1 N2 d1 d2 W (°) E T weight./kg* SMTSN-12 12 40 22 5 8,0 5,0 4,5 4,5 5,8 50 29 120 0,52 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section T5 min = 20mm the weight of the unit you´ll see down on this side material of shaft support: Aluminium Product data shaft: Material shaft: Cf53 Hardened: 59-65 HRC Rht min.0,6 Grounded Tol. h6 (0-11my) Surface roughness: Ra <= 0,3 Weight (shaft only): 0,89kg/m Straightness:0,2mm/m Predrilled: see the table Chamfer: on both sides of the shaft appr. 1 - 2mm x 30° (depending the diameter of the shaft)
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description Shaft support rail unit SMTSN 12-T1-W length precisely lengths to the millimetre, here choosable up to 6000mm, with rail in aluminium and shaft in hardened, quality: Cf53 (1.1213) This system you can combined with all open (look the "o" in the name of article) housing units, see categorie: http://lineareasy.com.de/shop/index.php/cat/c12_Gehaeuseeinheiten.html Urgent notes for order: The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. The type SMTSN we deliver assembled to you. Product data unit: Dimensions: Type d A h +/- 0,15 V N1 N2 d1 d2 W (°) E T weight./kg* SMTSN-12 12 40 22 5 8,0 5,0 4,5 4,5 5,8 50 29 75 0,52 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section T5 min = 20mm the weight of the unit you´ll see down on this side material of shaft support: Aluminium Product data shaft: Material shaft: Cf53 Hardened: 59-65 HRC Rht min.0,6 Grounded Tol. h6 (0-11my) Surface roughness: Ra <= 0,3 Weight (shaft only): 0,89kg/m Straightness:0,2mm/m Predrilled: see the table Chamfer: on both sides of the shaft appr. 1 - 2mm x 30° (depending the diameter of the shaft)
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description Shaft support rail unit SMTSN 12-T2-WV length precisely lengths to the millimetre, choosable up to 6000mm, with rail in aluminium and shaft in hardened, quality: Cf53-chrome plated (1.1213) This system you can combined with all open (look the "o" in the name of article) housing units, see categorie: http://lineareasy.com.de/shop/index.php/cat/c12_Gehaeuseeinheiten.html Urgent notes for order: The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. The type SMTSN we deliver assembled to you. Product data unit: Dimensions: Type d A h +/- 0,15 V N1 N2 d1 d2 W (°) E T weight./kg* SMTSN-12 12 40 22 5 8,0 5,0 4,5 4,5 5,8 50 29 120 0,52 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section T5 min = 20mm the weight of the unit you´ll see down on this side material of shaft support: Aluminium Product data shaft: Material shaft: Cf53-chrome plated Chrome layer thickness: ca. 10 my Chrome layer hardness: >= 800HV Hardened: 59-65 HRC Rht min.0,6 Grounded Tol. h7 (0-18my) Surface roughness: Ra <= 0,3 Weight (shaft only): 0,89kg/m Straightness:0,2mm/m Predrilled: see the table Chamfer: on both sides of the shaft appr. 1 - 2mm x 30° (depending the diameter of the shaft)
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description Shaft support rail unit SMTSN 12-T1-WV length precisely lengths to the millimetre, choosable up to 6000mm, with rail in aluminium and shaft in hardened, quality: Cf53-chrome plated (1.1213) This system you can combined with all open (look the "o" in the name of article) housing units, see categorie: http://lineareasy.com.de/shop/index.php/cat/c12_Gehaeuseeinheiten.html Urgent notes for order: The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. The type SMTSN we deliver assembled to you. Product data unit: Dimensions: Type d A h +/- 0,15 V N1 N2 d1 d2 W (°) E T weight./kg* SMTSN-12 12 40 22 5 8,0 5,0 4,5 4,5 5,8 50 29 75 0,52 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section T5 min = 20mm the weight of the unit you´ll see down on this side material of shaft support: Aluminium Product data shaft: Material shaft: Cf53-chrome plated Chrome layer thickness: ca. 10 my Chrome layer hardness: >= 800HV Hardened: 59-65 HRC Rht min.0,6 Grounded Tol. h7 (0-18my) Surface roughness: Ra <= 0,3 Weight (shaft only): 0,89kg/m Straightness:0,2mm/m Predrilled: see the table Chamfer: on both sides of the shaft appr. 1 - 2mm x 30° (depending the diameter of the shaft)
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description High-precision Linear-Set Type: SMGWH-16-WV-2GC16-KHPP Application: Linear guides, for example milling machines Size: shaft 16mm, chrome plated, length max 1000mm (choosable exactly) Free configuration to length system (shaft). 100% exactly system for your need with pr ice saving for th e user compared to the si ngl e purchase. System length: choosable exaclty up to 1000mm (lenght shaft) Material shaft: here in Cf53, hardened 59-65 HRC, chrome plated, Eht min. 0,9mm, grounded in h7 / -18my) Housing unit: 2 pcs SMGC-16-KHPP Shaft support block: 2 pcs. SMGWH-16 Shaft support block unit Type SMGWH-16-WV-2GC16-KHPP: 1x Shaft support block unit, length 1000mm with 2x SMGC-16-KHPP and 2x SMGWH-16, with hardened and chrome plated shaft in Cf53 Article: SMGWH-16-WV-GC16-KHPP unit-data components: 1.) Shaft (1x): quality: Cf53 (1.1213) hardened: 59-65 HRC Rht min.0,9 chrome plated appr. 10 my grounded tol. h7 (0-18my) length: up to 1000mm (please take your needed length up to 1000mm in the field "length in mm") surface roughness: Ra <= 0,3 weight: 1,58kg/m straightness: 0,2mm/m 2.) Housing unit (2x): Type Ø d Ø D H h +0,01 -0,02 A L E1 +/-0,15 E2 +/-0,15 N1 N2 Ø d1 M Gew. kg SMGC-16-KHPP 16 24 38 19 45 30 15 34 11 18 4,3 M5 0,13 3.) Shaft support block SMGWH-16 (2x): Type Ø d A B H h +/-0,02 E +/-0,12 Ø d1 Ø d2 M N1 N2 Gew kg SMGWH-16 16 45 20 38 22 32 5,2 10 M6 13 18 0,07 We delivered the components unmounted, the linear ball bearing will be greased Please give us your note for the wished length up to 1000mm in the button field "length in mm". The cut and chamfer is without surcharge!
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description High-precision Linear-Set Type: SMGWH-16-WSB-2GC16-KHPP Application: Linear guides, for example milling machines Size: shaft 16mm, length max 1000mm (choosable exactly) Free configuration to length system (shaft). 100% exactly system for your need with pr ice saving for th e user compared to the si ngl e purchase. System length: choosable exaclty up to 1000mm (lenght shaft) Material shaft: here in X90CrMoV18, hardened 55-59 HRC, Eht min. 0,9mm, grounded in h6 (0 / -11my) Housing unit: 2 pcs SMGC-16-KHPP Shaft support block: 2 pcs. SMGWH-16 Shaft support block unit Type SMGWH-16-WSB-2GC16-KHPP: 1x Shaft support block unit, length 1000mm with 2x SMGC-16-KHPP and 2x SMGWH-16, with hardened shaft in X90CrMoV18 Article: SMGWH-16-WSB-GC16-KHPP unit-data components: 1.) Shaft (1x): quality: X90CrMoV18 (1.4112) hardened: 55-59 HRC Rht min.0,9 grounded tol. h6 (0-11my) length: up to 1000mm (please take your needed length up to 1000mm in the field "length in mm") surface roughness: Ra <= 0,3 weight: 1,58kg/m straightness: 0,2mm/m 2.) Housing unit (2x): Type Ø d Ø D H h +0,01 -0,02 A L E1 +/-0,15 E2 +/-0,15 N1 N2 Ø d1 M Gew. kg SMGC-16-KHPP 16 24 38 19 45 30 15 34 11 18 4,3 M5 0,13 3.) Shaft support block SMGWH-16 (2x): Type Ø d A B H h +/-0,02 E +/-0,12 Ø d1 Ø d2 M N1 N2 Gew kg SMGWH-16 16 45 20 38 22 32 5,2 10 M6 13 18 0,07 We delivered the components unmounted, the linear ball bearing will be greased Please give us your note for the wished length up to 1000mm in the button field "length in mm". The cut and chamfer is without surcharge!
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description High-precision Linear-Set Type: SMGWH-16-WKB-2GC16-KHPP Application: Linear guides, for example milling machines Size: shaft 16mm, length max 1000mm (choosable exactly) Free configuration to length system (shaft). 100% exactly system for your need with pr ice saving for th e user compared to the si ngl e purchase. System length: choosable exaclty up to 1000mm (lenght shaft) Material shaft: here in X46Cr13, hardened 52-56 HRC, Eht min. 0,9mm, grounded in h6 (0 / -11my) Housing unit: 2 pcs SMGC-16-KHPP Shaft support block: 2 pcs. SMGWH-16 Shaft support block unit Type SMGWH-16-WKB-2GC16-KHPP: 1x Shaft support block unit, length 1000mm with 2x SMGC-16-KHPP and 2x SMGWH-16, with hardened shaft in X46Cr13 Article: SMGWH-16-WKB-GC16-KHPP unit-data components: 1.) Shaft (1x): quality: X46Cr13 (1.4034) hardened: 52-56 HRC Rht min.0,9 grounded tol. h6 (0-11my) length: up to 1000mm (please take your needed length up to 1000mm in the field "length in mm") surface roughness: Ra <= 0,3 weight: 1,58kg/m straightness: 0,2mm/m 2.) Housing unit (2x): Type Ø d Ø D H h +0,01 -0,02 A L E1 +/-0,15 E2 +/-0,15 N1 N2 Ø d1 M Gew. kg SMGC-16-KHPP 16 24 38 19 45 30 15 34 11 18 4,3 M5 0,13 3.) Shaft support block SMGWH-16 (2x): Type Ø d A B H h +/-0,02 E +/-0,12 Ø d1 Ø d2 M N1 N2 Gew kg SMGWH-16 16 45 20 38 22 32 5,2 10 M6 13 18 0,07 We delivered the components unmounted, the linear ball bearing will be greased Please give us your note for the wished length up to 1000mm in the button field "length in mm". The cut and chamfer is without surcharge!
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description High-precision Linear-Set Type: SMGWH-16-W-2GC16-KHPP Application: Linear guides, for example milling machines Size: shaft 16mm, length max 1000mm (choosable exactly) Free configuration to length system (shaft). 100% exactly system for your need with pr ice saving for th e user compared to the si ngl e purchase. System length: choosable exaclty up to 1000mm (lenght shaft) Material shaft: here in Cf53, hardened 59-65 HRC, Eht min. 0,9mm, grounded in h6 (0 / -11my) Housing unit: 2 pcs SMGC-16-KHPP Shaft support block: 2 pcs. SMGWH-16 Shaft support block unit Type SMGWH-16-W-2GC16-KHPP: 1x Shaft support block unit, length 1000mm with 2x SMGC-16-KHPP and 2x SMGWH-16, with hardened shaft in Cf53 Article: SMGWH-16-W-GC16-KHPP unit-data components: 1.) Shaft (1x): quality: Cf53 (1.1213) hardened: 59-65 HRC Rht min.0,9 grounded tol. h6 (0-11my) length: up to 1000mm (please take your needed length up to 1000mm in the field "length in mm") surface roughness: Ra <= 0,3 weight: 1,58kg/m straightness: 0,2mm/m 2.) Housing unit (2x): Type Ø d Ø D H h +0,01 -0,02 A L E1 +/-0,15 E2 +/-0,15 N1 N2 Ø d1 M Gew. kg SMGC-16-KHPP 16 24 38 19 45 30 15 34 11 18 4,3 M5 0,13 3.) Shaft support block SMGWH-16 (2x): Type Ø d A B H h +/-0,02 E +/-0,12 Ø d1 Ø d2 M N1 N2 Gew kg SMGWH-16 16 45 20 38 22 32 5,2 10 M6 13 18 0,07 We delivered the components unmounted, the linear ball bearing will be greased Please give us your note for the wished length up to 1000mm in the button field "length in mm". The cut and chamfer is without surcharge!
Results for
Surface roughness - Import exportNumber of results
35 ProductsCompany type
Category
- Printer paper (5)
- Lubricants, industrial (1)
- Marking - diverse products (1)
- Agriculture - Machines & Equipment (1)
- Cars - electrical and electronic parts and components (1)
- Industrial Vehicles (1)
- Nails and tacks (1)
- Paper - art (1)
- Plastic packaging (1)
- Precious and semiprecious stones and pearls (1)
- Weighing and dosing equipment (1)