Steel-forming - Import export

EN 10149-2 Thermomechanically Rolled Steels : S315MC, S460 MC, S 500MC, S 700MC EN 10149-3 Normalized or Normalizing Rolled Steels : S260NC – S 420 NC

Shrink disc to connect a hollow hub to a shaft. They are mounted on the OD of the hub and generate pressure on the hub wall by reducing the ID with wedgeformed rings, creating a press fit between the hub and shaft. They are suitable for static, dynamic and shock loads. for extremely high torques no axial shaft/hub offset when assembling selfcentring The version 23380014072 has high tensile ISO 4762 screws. Assembly Remove existing transportation locks. Clean and lightly oil shaft, internal and external hub diameters. Do not use MoS2 or grease. Slide shrink disc onto hub. Then slide unit (shrink disc/hub) onto shaft and position correctly. Gently tighten clamping screws one after the other by hand. Then use a torque wrench to tighten the clamping screws crosswise in several increments to the defined tightening torque MS. 1st increment approx. 33% MS 2nd increment approx. 66% MS

Coupling stainless steel 1.4057. Screws stainless steel 1.4301. For applications that require a small construction volume and low surface pressure. The keyless locking coupling can be fully recessed in a hub connection. for shaft diameters 6 20 mm suitable for hubs with low wall thickness minimum axial offset possible selfcentring Assembly Lightly oil keyless locking coupling on the tapered faces and contact points of the shaft and hub. Do not use MoS2 or grease. Insert keyless locking coupling in the hub seat and slide onto shaft. Tighten screws crosswise in several increments to the defined tightening torque. Dismantling Remove all screws and screw into the extraction threads of the front flange. Tighten screws crosswise in several steps until the keyless locking coupling loosens. Tolerances Shaft Recommended tolerance h8. Surface quality Rz ≤ 16 µm. Hub Recommended tolerance H8. Surface quality Rz ≤ 16 µm.

1.4401 stainless steel, similar to DIN 39. Grip suitable for DIN 950 handwheels.

Form C and F: Ball steel, ball seat high-carbon steel. Form G and J: Ball high-carbon steel, ball seat steel. Version: Form C and F: Ball hardened and black oxidised, ball seat phosphated. Form G and J: Ball phosphated, ball seat hardened and black oxidised. Note: The self-aligning pads serve as stops, rests and thrust pads in fixture construction. The seating face returns to the start position when the load is removed. Ball secured against rotation. Drawing reference: Form C: male thread, flattened ball, smooth Form F: male thread, flattened ball, diamond grip Form G: press fit, flattened ball, smooth Form J: press fit, flattened ball, diamond grip

Body carbon steel. Ball, ball bearing steel 1.2067. Form D: Ball with POM insert. Form H: Ball with POM insert. Form K: Ball with carbide insert. Form M has a carbide ball. Version: Body tempered and phosphated. Ball hardened. Form M ball nickel plated. Note: Self-aligning pads serve as stops, supports and thrust pads in fixture constructions. Ball secured against rotation. * Valid only if the minimum bore depth is observed. Drawing reference: Form C: with male thread, flattened ball, smooth. Form D: with male thread, flattened ball, with POM insert. Form F: with male thread, flattened ball, diamond grip. Form M: with male thread, flattened ball, with carbide insert. Form G: press fit, flattened ball, smooth. Form H: press fit, flattened ball, with POM insert. Form J: press fit, flattened ball, diamond grip. Form K: press fit, flattened ball, with carbide insert.

Material: Housing thick steel plate. Tyres steel-wire reinforced elastic solid rubber. Wheel body welded steel. Version: Housing press formed. Reinforced fork, base plate and centre pin. Double ball bearing with hardened shells in the castor head. Precision ball bearings in the wheels. Note: These castors are particularly impact and shock proof and assure a high service life. Wheel axle bolted.

The flat blade for cutting steel is made of aluminum oxide. It is designed for cutting: hard and soft steels, cast iron, cast steel, aluminum in the form of bars, sections, pipes, plates, thin profiles and sheets, and for transverse cutting of metal bars and wires. TECHNICAL DATA: Outer diameter - 230 mm Dial thickness - 2.0 mm Inner diameter - 22.23 mm Shape - flat Granulation type - A (alumina) Grain thickness - 46 Maximum rotational speed - 6,600 rpm Maximum linear speed - 80 m/s.

- Wide range of steel grades: structural, cold forming, HSLA, etc. - In coils or cut-to-length - Standard os curtomized sizes

ASM model is made of cast iron construction. ASM machines are combining the user friendly features, quality and best prices as an economical model. ASM - 3 Rolls Asymetical Plate Roll Machine Standard Details Body is made of cast iron construction Central rollers powered with electric motor, gearbox and gear drive Cone bending device Self brake main motor Upper roll is opanable by side Lower roll and back roll are with hand wheels up & down adjustable. Separate eletric control panel with foot pedal Suitable for CE, ISO 9001-2008, TSEK and TURQUM certificates ASM - 3 Rolls Asymetical Plate Roll Machine Optional Features Induction hardened rolls. Back roll with motor. Digital display.

This Geka Hydracrop 110S is a versatile and economic universal steelworker with 2 independent hydraulic cylinders, 2 areas and 5 workstations. It is suitable for punching profiles and for mounting special equipment. It benefits from a greater speed backed by a powerful hydraulic unit. Geka Hydracrop 110S Standard Details Machines driven by two cylinders 5 work stations, fitted with tools for L, shearing, round and square bars, rectangular notching and punching Quick change punch Flat bar shearing table with adjustable guides 2 simultaneous work stations Greater speed backed by a powerful hydraulic unit Special equipment for approaching at reduced pressure and slow speed Precision punching table with X & Y measuring stops Precision notching table with X & Y measuring stops Ready for production pack comprising: One meter "touch & cut" length stop with fine adjusting Lamp for enhanced vision of cutting zones 10 sets of round punches and dies

Rolled stainless steel is intended for the production of visible and durable buildings, parts and goods. Stainless steel is especially popular in everyday life, construction, mechanical engineering and medicine. Rolled stainless steel has the form Matte; Polished; Mirror. Depending on the requirements and place for the installation of stainless steel, a selection of its type is made. Stainless steel is resistant to aggressive environments and, if used correctly, is a durable material, because it is no secret that products made of this metal, just like gold, are passed from generation to generation. According to the method of appointment, stainless steel can be used both for food, for example, steel 08X18H10, and for non food products. Stainless steel is produced at factories in our country (according to GOST) and abroad (according to DIN). Stainless steel sheet DIN EN 10088 2 (strip) is intended for the production of children's playgrounds

Hot rolled steel sheet is produced at factories in our country , its scope is extremely wide both in everyday life and in mechanical engineering and construction. Hot deformed sheet is used to make Armored doors; Boxes and other square shapes; Awnings; Fences; Steel structures ; Press forms; Weight blocks; Auto, mototechnics, agricultural machines, tractors; Hangars; Wagons; Machine tools; Steel strip ; Channel and bent corner ; Profile pipe , welded, longitudinal seam ; Bridges, passages and other floors; Lifting equipment; Decking ; Tool. Hot rolled sheets are also made from steel coils. Overall dimensions of gk sheet width from 1 meter to 2.5; length from 2 to 6 meters. The price of hot rolled (hot rolled) sheet is displayed in the price list on the website. You can contact us by mail - marketing@stalevar.com or by phone +380675624220.

Cranes scales for weighing steel plates, steel profiles, other products Capacity form 300 kg to 100 tons With CE-M approved