Results for
MATERIALS TRANS LOGISTIC
Armenia
The laminated surface of the board is highly resistant to various natural and chemical influences. This property makes our company’s laminated plywood indispensable in the manufacture of reusable concrete formwork.Advantages: More than 20 cycles of use in monolithic housing construction Exceptional strength and wear resistance Increased water resistancePrices may change due to currency fluctuations, so to order, please write to the following contacts:1227.991522.41818.6621162414Chernov Arseniy Sergeevich+7 (921) 787-48-58Chernov-senia@mail.ruChernov Saveliy Sergeevich+7 (921) 571-40-90savelij.chernov.03@mail.ruDelivery from 3000 to 50000 units.
Request for a quoteMATERIALS TRANS LOGISTIC
Armenia
The laminated surface of the board is highly resistant to various natural and chemical influences. This property makes our company’s laminated plywood indispensable in the manufacture of reusable concrete formwork
Request for a quoteLISINE EPSTEIN COSMETICS BV
Belgium
A cleansing milk for the face. With its pleasant, silky smooth texture, this milk is particularly suitable for make-up removal, notably in the evening. It helps the skin to regain its natural radiance. Thanks to the inclusion of Moringa extract, it deeply detoxifies the skin and protects it against pollution. Green Cleanser is a veritable aroma therapeutic beauty treatment thanks to a powerful combination of essential oils. Aloe extract helps to hydrate and calm the skin, while numerous vegetable oils provide nourishment.
Request for a quoteARUBIS
Belgium
These Arubis Smooth Polyurethane Hoses provide greater tear and abrasion resistance than natural rubber with only 1mm thickness. They are FDA, EEC 1935/2006 and can be used in food, pharma and agrocultural industry. These PU-hoses have absolutely no smell nor taste and are easy to clean thanks to their flexible design. Flexible and Airtight FDA approved Abrasion and tear resistant Durable and strong design and easy to use These extremely abrasion resistant PU-hoses are resistant to mechanical loads, stresses and vibrations. The Arubis PU-hoses are smooth on the inside and are designed without spiral wire with a wall thickness of 1mm. Operating conditions of a PU-hose
APICURE PARIS IMPORT-EXPORT
France
Straw hat. Made of braided straw in white or natural green colour, making it breathable. With an inner band for a more comfortable fit. Straw
Request for a quoteAPICURE PARIS IMPORT-EXPORT
France
Sunglasses with UV400 protection. Durable frame with a stylish design and glossy finish, in a variety of fun colours. Black lenses for guaranteed style. Presented in an individual recycled bag. UV400 Protection
Request for a quoteLAVAL EUROPE
France
Jewelry cases in smooth, matte synthetic sheathing. Available in black, gray or cream, for all types of jewelry. These cases can be customized with your logo on request. Personalization is carried out in our workshops in France. Models are available with hook or tab, depending on the type of jewelry. Black models: interior in black synthetic suede and satin. Cream models: interior in cream-colored synthetic suede. Gray models: interior in gray suede and white synthetic satin.
Request for a quoteNORELEM FRANCE
France
Sleeve and spring stainless steel. Ball stainless steel or POM. Version: Sleeve bright. Steel ball hardened and bright.
Request for a quoteNORELEM FRANCE
France
The 5-axis vice features excellent stability and flexibility, and is extremely easy to use. The 5-axis vice can be used as a positive-down force vice or normal vice. When the positive down force function is used, the workpiece can be held with a repeat accuracy of ±0.01 mm. A workpiece clamping height of 180 mm enables easy access during machining. The clamping width is preset using the crank handle, cutting down on setup times. Additionally, the closed geometries and the resistance to dirt that they provide keep maintenance and repair times to a minimum.
Request for a quoteNORELEM FRANCE
France
The functioning principle make the wedge clamps ideal for series clamping. The wedge form can exert high clamping forces. These wedge clamps can be mounted in grid holes or T-slots. Tightening the socket screw moves the wedge down and the jaws out pressing the workpieces against the fixtures fixed stops. The wedge has a slightly elongated hole allowing for movement to compensate for tolerances. Spread width: M8 = ±0.5 mm M10 = ±1.0 mm M12 = ±1.0 mm M16 = ±1.5 mm Drawing reference: D) DIN 6912 cap screw 1) Jaw face smooth 2) Jaw face serrated 3) Wedge clamps 4) Workpiece 5) Fixed stop
Request for a quoteAGOFORM GMBH AUGUST OTTENSMEYER
Germany
Because we use our own extrusion lines we are in a position to produce polystyrene sheets in a maximum width of 1200 mm and theoretically in an infinite length in high-gloss decorative finishes, timber designs or metal decors. The thickness of the sheets can be selected within the range 0.8 mm - 4.0 mm in 0.1 mm increments. All the decorative sheets are film-protected and can be corona-treated on the reverse. The corona coating serves as a bonding agent to facilitate pressure-bonding of the decorative sheets.
Request for a quoteCETEC SYSTEMS SONDERMASCHINEN- VERTRIEBS GMBH
Austria
Smooth, bent at 45¡. ESD. Steel thickness 3,0mm, Length 152mm.
Request for a quoteCETEC SYSTEMS SONDERMASCHINEN- VERTRIEBS GMBH
Austria
For the general handling of all types of components. ESD. Model making. Steel thickness 5.0mm, Length 154mm
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
AGOFORM GMBH AUGUST OTTENSMEYER
Germany
Because we use our own extrusion lines we are in a position to produce polystyrene sheets in a maximum width of 1200 mm and theoretically in an infinite length in high-gloss decorative finishes, timber designs or metal decors. The thickness of the sheets can be selected within the range 0.8 mm - 4.0 mm in 0.1 mm increments. All the decorative sheets are film-protected and can be corona-treated on the reverse. The corona coating serves as a bonding agent to facilitate pressure-bonding of the decorative sheets.
Request for a quoteAGOFORM GMBH AUGUST OTTENSMEYER
Germany
Because we use our own extrusion lines we are in a position to produce polystyrene sheets in a maximum width of 1200 mm and theoretically in an infinite length in high-gloss decorative finishes, timber designs or metal decors. The thickness of the sheets can be selected within the range 0.8 mm - 4.0 mm in 0.1 mm increments. All the decorative sheets are film-protected and can be corona-treated on the reverse. The corona coating serves as a bonding agent to facilitate pressure-bonding of the decorative sheets.
Request for a quoteAGOFORM GMBH AUGUST OTTENSMEYER
Germany
Because we use our own extrusion lines we are in a position to produce polystyrene sheets in a maximum width of 1200 mm and theoretically in an infinite length in high-gloss decorative finishes, timber designs or metal decors. The thickness of the sheets can be selected within the range 0.8 mm - 4.0 mm in 0.1 mm increments. All the decorative sheets are film-protected and can be corona-treated on the reverse. The corona coating serves as a bonding agent to facilitate pressure-bonding of the decorative sheets.
Request for a quoteAGOFORM GMBH AUGUST OTTENSMEYER
Germany
Because we use our own extrusion lines we are in a position to produce polystyrene sheets in a maximum width of 1200 mm and theoretically in an infinite length in high-gloss decorative finishes, timber designs or metal decors. The thickness of the sheets can be selected within the range 0.8 mm - 4.0 mm in 0.1 mm increments. All the decorative sheets are film-protected and can be corona-treated on the reverse. The corona coating serves as a bonding agent to facilitate pressure-bonding of the decorative sheets.
Request for a quoteAGOFORM GMBH AUGUST OTTENSMEYER
Germany
Because we use our own extrusion lines we are in a position to produce polystyrene sheets in a maximum width of 1200 mm and theoretically in an infinite length in high-gloss decorative finishes, timber designs or metal decors. The thickness of the sheets can be selected within the range 0.8 mm - 4.0 mm in 0.1 mm increments. All the decorative sheets are film-protected and can be corona-treated on the reverse. The corona coating serves as a bonding agent to facilitate pressure-bonding of the decorative sheets.
Request for a quoteAGOFORM GMBH AUGUST OTTENSMEYER
Germany
Because we use our own extrusion lines we are in a position to produce polystyrene sheets in a maximum width of 1200 mm and theoretically in an infinite length in high-gloss decorative finishes, timber designs or metal decors. The thickness of the sheets can be selected within the range 0.8 mm - 4.0 mm in 0.1 mm increments. All the decorative sheets are film-protected and can be corona-treated on the reverse. The corona coating serves as a bonding agent to facilitate pressure-bonding of the decorative sheets.
Request for a quoteAGOFORM GMBH AUGUST OTTENSMEYER
Germany
Because we use our own extrusion lines we are in a position to produce polystyrene sheets in a maximum width of 1200 mm and theoretically in an infinite length in high-gloss decorative finishes, timber designs or metal decors. The thickness of the sheets can be selected within the range 0.8 mm - 4.0 mm in 0.1 mm increments. All the decorative sheets are film-protected and can be corona-treated on the reverse. The corona coating serves as a bonding agent to facilitate pressure-bonding of the decorative sheets.
Request for a quoteAGOFORM GMBH AUGUST OTTENSMEYER
Germany
Because we use our own extrusion lines we are in a position to produce polystyrene sheets in a maximum width of 1200 mm and theoretically in an infinite length in high-gloss decorative finishes, timber designs or metal decors. The thickness of the sheets can be selected within the range 0.8 mm - 4.0 mm in 0.1 mm increments. All the decorative sheets are film-protected and can be corona-treated on the reverse. The corona coating serves as a bonding agent to facilitate pressure-bonding of the decorative sheets.
Request for a quoteNORELEM FRANCE
France
The easy operability and rapid adjustment using a scale means that the clamping jaws can be quickly and surely adapted to new workpieces The workpiece is always centred through the systematic construction of the 5-axis compact clamping system. The optimal accessibility to the workpiece allows short, standard tooling to be used. Tooling costs are significantly reduced. Positive down force by a clamping depth of >5 mm. Clamping widths of 20 mm to 320 mm are possible. Assembly: The 5-axis clamping system compact can be mounted on T-slot tables, grid systems or, using an adapter flange on conventional zero-point clamping systems. Accessory: Seating ledge 41345 Jaw plates 41320 Pendulum jaws 41325 Centre jaws 41335 Coupling for cross-clamping 41365 Order the seating ledges and jaw plates with pins separately.
Request for a quoteHAJ TEX GROUP
Uzbekistan
PACKING METHOD: ROLL PRINTING TYPE: ROTARY PRINTING COMPOSITION: 92% COTTON 8% ELASTANE DENSITY (FOR ROLL): 140-230 g/m2. WIDTH (FOR ROLL): 175-210 CM
Request for a quoteHAJ TEX GROUP
Uzbekistan
PACKING METHOD: ROLL PRINTING TYPE: ROTARY PRINTING COMPOSITION: 50% COTTON 50% POLYESTER DENSITY (FOR ROLL): 140-230 g/m2. WIDTH (FOR ROLL): 175-210 CM
Request for a quoteHAJ TEX GROUP
Uzbekistan
PACKING METHOD: ROLL PRINTING TYPE: ROTARY PRINTING COMPOSITION: 100% DENSITY (FOR ROLL): 140-230 G/M V sq. WIDTH (FOR ROLL): 175-210 CM
Request for a quoteResults for
Smoothing - Import exportNumber of results
72 ProductsCountries
Company type
Category