Pulleys - Import export

65 mm pulley With 19mm hole Suitable for 1hp engines

65 mm pulley With 24mm hole Suitable for 2hp engines

Pulley with cast iron wheel. Steel pin, hook and frame.

Pulley

Steel. Toothed pulleys without aluminium rim flanges. Version Steel phosphated. Aluminium bright. Note Standard HTD profile with metric pitch (halfround toothing). At least one belt pulley must have a rim flange. The toothed belt pulleys have a centre bore or a pilot hole (this can vary due to manufacturing methods). For this reason, the dimension D2 max. given in the table is the maximum diameter of the bore with which the toothed belt pulleys are supplied. This pilot/centre bore can be amended by the customer to produce a reamed bore, reamed bore with keyway or a tapped hole. Alternatively, customers can also use bushes to reduce the bore diameter. The pulleys may be recessed on the sides.

Aluminium. Rim flanges, steel. Version Aluminium bright. Steel electro zincplated. Note Standard T profile acc. to DIN 7721 T2 with metric pitch (trapezoidal toothing). At least one belt pulley must have a rim flange. The toothed belt pulleys have a centre bore or a pilot hole (this can vary due to manufacturing methods). For this reason, the dimension D2 max. given in the table is the maximum diameter of the bore with which the toothed belt pulleys are supplied. This pilot/centre bore can be amended by the customer to produce a reamed bore, reamed bore with keyway or a tapped hole. Alternatively, customers can also use bushes to reduce the bore diameter.

Standard HTD profile with metric pitch (rounded toothing). At least one toothed belt pulley must have a rim flange. Conical hole for taper clamping bushes. The taper clamping bushes must be ordered separately and are available for various shaft diameters. Pulleys with a taper hole are statically balanced as per ISO 1940 grade G16.

igus® pulley Roller with press-fitted iglidur® G bearing Material: PA2200 and iglidur® G Lubricant free Quiet Resistant to corrosion robolink® multi-axis joint robolink® Configurator

The line laser is a measuring device for aligning drive pulleys laterally, horizontally and vertically using a laser beam, preventing heavy wear to the edges of the belt. Laser beam range approx. 5 to 10 m Laser class 2 (EN 6082511997) Wavelength 630–680 mm Power < 1 mW Power supply 2 x 1.5 V (LR44) Note Never look directly into the laser beam and do not point it at other people, animals or strongly reflective surfaces. The device and the target points contain highpowered magnets. Individuals with pacemakers should not use the device due to safety reasons. Keep a safe distance away from electronic devices and wristwatches in order to prevent interference. The device must not be used in potentially explosive areas.

Belt back and belt teeth CR. Tension cords Glascord. Tooth covering mesh polyamide. Note Endless toothed belts with an arched profile as per ISO 13050 with metric pitch. The rounded shape of the tooth contour provides a particularly high degree of safety against incorrect tooth interlocking, combined with a very rounded tooth mesh. Operating noise is significantly reduced by the rounded tooth mesh. The toothed belts are robust, economical and versatile. Belt speed vmax perm. 50 m/s Transmissible power up to 8.42 kW Permissible speed up to 14000 rpm Lownoise and lowmaintenance Very good chemical resistance, particularly against oils, greases and fuels Accurate positioning and angles

Standard ATprofile with metric pitch (trapezoidal toothing). For manufacturing your own toothed wheels

Endless toothed belt with trapezoidal profile to DIN 7721 T1 with metric pitch. Ideal for drives with high belt flexibility. Permits smallest pulley diameters. The toothed belts are intended for drives where precision is a requirement, safety is important and the effects of chemicals are a concern. maintenancefree highpower transmission minimal belt extension accurate positioning and angles very good chemical resistance, especially to oils, greases and fuels extremely high abrasion resistance transmits power up to 30 kW reliable speed up to 10,000 rpm

The tension meter is used to perform a pretension test on commercially available belt systems quickly and easily by means of frequency measurement. Fully electronic and equipped with stateoftheart microprocessor technology, the meter enables precise adjustment of all V, toothed and flat belts that have to be tensioned in the range from 10 to 600 Hz. The measurement must never be performed while the drive is running The meter is not permitted or certified for use in potentially explosive areas.

Industrial Pulley Blocks for Wire Hoists and Winches Range: We provide industrial pulley blocks specifically designed for hoists and winches. Features: Equipped with 1 to 8 pulleys Standard equipment: single hook (DIN 15401 standard). Less common option: double hook (DIN 15402 standard). Lifting Capacity: lifting loads from 500 kg to over 250 tons. Applications: for cranes, overhead bridges, etc.. Upon request,: pulley blocks with motorized rotation of hook pulley blocks with locking of hook each 90° pulley block with weighing of load

Pulleys with bearings

Pulleys / Drums

Speciality products and components Guide discs (for corrugated sidewall belts) with diameters of Ø 300 mm Special idlers Drive shafts and return shafts Pedestal bearings Clamping sets

Conveyor Belt Pulleys Drive pulleys Bend pulleys Cage (link) pulleys Shaker pulleys Snub pulleys In serial production: Up to diameters of 610 mm Up to axis lengths of 4,000 mm Everything beyond these dimensions is deemed speciality-made and manufactured to specifications as provided.

Idler with precision roller tube and precision groove ball bearing, multiple labyrinth, dust cover, rain cover and grease chamber Support rings and buffer rings Side guiding rollers Holding brackets for lower belt rollers

germanGrip® MR 60 Black with CN Layer Specifications: Colour: black Detailed profile: 34 x 17 x 3 mm [small diamond groove] Density: 1.13 ±0.03 g/cm³ Hardness: 60 ±5 ° Shore A Tensile strength: ≥ 400 % Abrasion: ≤ 130 mm³ Available dimensions: Thickness: 8 / 10 mm Width: 1.500 / 2.000 mm Available length: 10 / 20 / 30 / 40 / 50 m Downloads: Technical Data Sheet germanGrip® MR 60 Black with CN Layer - English [PDF]

germanGrip® MR 45 Red with CN Layer Specifications: Colour: red Detailed profile: 34 x 17 x 3 mm [small diamond groove] Density: 1.08 ±0.03 g/cm³ Hardness: 40 ±5 ° Shore A Tensile strength: ≥650 % Abrasion: ≤ 85 mm³ at 5 N Available dimensions: Thickness: 8 / 10 mm Width: 1.500 / 2.000 mm Available length: 10 / 20 / 30 / 40 / 50 m Downloads: Technical Data Sheet germanGrip® MR 45 Red with CN Layer - English [PDF]

germanGrip® Cera basic with CN Layer Specifications: Detailed profile: 20 x 20 x 4 mm Base-Rubber Characteristics: Density: 1.13 ±0.03 g/cm³ Hardness: 60 ±5 ° Shore A Tensile strength: ≥ 400 % Abrasion: ≤ 130 mm³ Available dimensions: Thickness: 12 mm Width: 385 mm Available length: 10 m Downloads: Technical Data Sheet germanGrip® Cera basic with CN Layer - English [PDF]

germanGrip® Cera with CN Layer Specifications: Detailed profile: 20 x 20 x 4 mm Base-Rubber Characteristics: Density: 1.13 ±0.03 g/cm³ Hardness: 60 ±5 ° Shore A Tensile strength: ≥ 400 % Abrasion: ≤ 130 mm³ Available dimensions: Thickness: 12 mm Width: 385 mm Available length: 10 m Downloads: Technical Data Sheet germanGrip® Cera with CN Layer - English [PDF]

germanGrip® Cera with CN Layer Specifications: Detailed profile: 20 x 20 x 4 mm Base-Rubber Characteristics: Density: 1.13 ±0.03 g/cm³ Hardness: 60 ±5 ° Shore A Tensile strength: ≥ 400 % Abrasion: ≤ 130 mm³ Available dimensions: Thickness: 12 mm Width: 385 mm Available length: 10 m Downloads: Technical Data Sheet germanGrip® Cera with CN Layer - English [PDF]