Profiles - Import export

Standard ATprofile with metric pitch (trapezoidal toothing). For manufacturing your own toothed wheels

Complete wheel tubeless road profile for wheel loader FERRUM DM308 x4 consisting of 1 x tire road profile, dimensions as shown 1 x rim 1 x valve

Corner profiles are elastic and provide good sealing at different angles, and are widely applicable in construction and industry. Available in both EPDM, TPE and other materials. Due to elasticity, sealing is possible at different angles EPDM and TPE UV and ozone resistant, can be used both indoors and outdoors Long lifespan

Rectangular profiles are very versatile. As a seal, door profile or finishing profile. Available in different materials. For various indoor and outdoor applications Very versatile for use in ship, bodywork and vehicle construction Possible in EPDM and sponge rubber

Uprofiles are suitable as a sealing profile, edge finishing, clamping profile or as a bumper. High elasticity protects against tearing UV and ozone resistant Long lifespan

GJL 250 annealed or EN AW-7075. Drawing reference: machined faces: ±0.25 mm length tolerance: ≤200 mm: +3/+10 >200 mm ≤590 mm: +8/+15 ≥600 mm: +20/+50

seaing profile EN45545

STEEL GRADES The standrard stock of chromed bars consists of steel grades C45 or C45E or C45R and 20MnV6 in untreated delivery condition (+AR) and 42CrMo4 in quenched and temperd delivery condition (+QT). DELIVERY CONDITIONS The solid bars subjected to chroming process are available in different delivery conditions in orde to obtain specific properties. NORMALIZATION Heat treatment consisting heating process followed by gradual cooling in controlled atmosphere. Thanks to this process the steel structure becomes more "refined" and improve its impact properties (perlitic structure). INDUCTION HARDENING The surface of the steel bar is heated by electric induction followed by fast cooling. This process leads to a high surface hardness but also to fragility and low impact values (Martensite surface structure). QUENCHING AND TEMPERING Quenching process followed by tempering. This process leads to a good hardness and resistance and it reduces its fragility in comparsion to induction...

We supply both from stocks and productions wide range of round bars , certified acc to. EN 10204 2.2 and/or 3.1 Steels for General Use of EN 10025 (S235/275/355 JR/J0/J2) Steels for Quenching and Tempering acc. EN 10083-2, EN 10083-3 Steels for Case Hardening acc. EN 10084 (C10, C15, 16MnCr5, 20MnCr5, 36CrMn5 (UNI7845) Micro-alloyed Steels (18MnV5, 20MnV6) Free Cutting Steels acc. EN 10087(11SMn30/11SMn37) Other Grades upon request.  Structural Steel  Carbons Steel  Case Hardening Steel  Heat Treated Steel  Spring Steel  Free Cutting Steel  Tool Steel  Stainless Steel

Wide flange columns ( HD Sections) Wide Flange Bearing Piles B ritish Universal Beams acc to BS4 Part 1 ( UB Sections) B ritish Universal Coloumns acc to BS4 Part 1 ( UC Sections) Channels with Parallel Flanges , acc to NF A 45-255 Americam Standart Channels acc to ASTM A6 (C Sections) Japanese H – Sections acc to JIS G 3192

Size Range W 8-100 Dimensions: ASTM A 6/A 6M Tolerances: ASTM A 6/A 6M Surface condition: according to ASTM A 6/A 6M

Sizes ; UPE 80-400 UNP 50-400 We supply the following channels in various dimensions and qualities with surface condition: according to EN 10163-3: 2004, class C, subclass 1

We supply the following I beams in various dimensions and qualities acc. to DIN 1025-2 IPB (HEB) 100-1000 IPB I (HEA) 100-1100 IPBV (HEM) 100-1100 IPB IL (HEA A) 100-1100 DIN 1025-2: Hot rolled I-beams - Part 2: Wide flange I-beams, IPB-serie; dimensions, masses, sectional properties EN 10163-3: Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections; part 3: Sections CHANNELS ( UNP /UPE) Sizes ; UPE 80-400 UNP 50-400 We supply the following channels in various dimensions and qualities with surface condition: according to EN 10163-3: 2004, class C, subclass 1

We supply the following I beams in various dimensions and qualities acc. to DIN 1025-5 EUR NORM 19-57; IPE 80-600 IPEA 80-600 IPN 80-600

rubber profile in different colours

Body carbon steel. Balls roller bearing steel. Diverters plastic. Standard guide carriage with recirculating ball guidance precision N not preloaded (Z0). With doublesided end seal. 4row versions with round arch profile. The profile guide rail tracks are arranged at 45° and can accept loads from all directions. High dynamic values v = 5 m/s. Applicable temperature in continuous use max. 80 °C. On request Various precision and preload classes. Drawing reference 1) ground ref. edge

Body, extruded aluminium section. Bearing housing and slide, aluminium. Profile guide rail and guide carriage, steel. Toothed belt, polyurethane with steel cord reinforcement. Version Body natural colour anodised Bearing housing and slide, black anodised. Tracks of the profile guide rail, inductively hardened and ground. Note Compact and flexible linear actuators with toothed belt drive. The body consists of a selfsupporting aluminium extruded section with integrated profile guide rail. This rail system is able to absorb highest forces from all directions, is lowwear, and is optimised for moving large masses. Slots are located on the outer sides of the aluminium profile, ensuring easy, reliable assembly and enabling accessories mounted. Proximity switches can be positioned and fastened in the upper Tslot. The aluminium profile is fully compatible with our standard I series profiles.

Housing glassbead reinforced polyamide. Rollers POM. Screws steel. Version Housing and rollers black. Screws electro zincplated. Note The roller elements are ideal for constructing roller conveyors in any length and width. Suitable for aluminium profiles types B and I. The sprung guide tabs underneath universally match slots sized 8 and 10. Mounting Form A Insert the lower housing part with rollers into the aluminium profile slot. Set the spread pins on the upper housing part into the lower housing part and press down. The spread pins expand the clamps and locks the roller element in the slot. Mounting Form B Insert the lower housing part with rollers into the aluminium profile slot. Set the upper housing part on top and press down. Knocking or screwing the screws in locks and clamps the roller element in the slot.

These brackets are used to hang aluminium profiles for roller rails in a round profile. A mounting set is supplied.

Ball stainless steel. Housing steel. Cage polyamide, carbonfibre reinforced. These ball transfer units are matched to the aluminium profiles for roller rails and can be mounted on them quickly and easily. For flexible movements in two dimensions. With a lowwear and lowfriction ball rollers. No tools required. Suitable for aluminium profiles Type B and I.

Bearing flanges and fastening pieces PAGF. Bolts steel. Black. Bolts electro zincplated. Two bearing flanges combined with a D50 type I aluminium profile tube (10050) form a feed roller (loadbearing roller). The bearing flanges are simply pressed into the aluminium profile tube. These can be used for many conveyance tasks. The bearing flanges have ball bearings and springloaded fastening spigots which enable transport rollers to be retrofitted into existing structures. A roller conveyor is created when several transport rollers are mounted in series. Two bearing flanges are required for a transport roller.

Type I polypropylene. Type B polypropylene + TPE. The cover and adapter profile made of flexible plastic are used for two different applications. As a cover profile it seals the profile slots against dust and dirt. As an adapter profile with the open side facing out it is used to hold panel elements.

Angle diecast zinc. Screws and slot nuts steel. End cap polyamide, fibreglass reinforced. Version Angle painted aluminium tone. Screws and slot nuts electro zincplated. End cap black. Note Suitable for reinforcing profile constructions and for frictional connection of profiles with each other without machining. Can also be used as fastening element (e.g. bracket) for any components. The angles have centring lugs for accurate and twistproof mounting. The centring lugs can be removed if necessary by breaking off i.e. for mounting plates. The open side can be closed off with the end cap.

The connecting sets are used to connect two aluminium profiles at right angles. They allow free position of the profiles. The profile slots positioned at rightangles to each other remain free. Panel elements can be positioned in the profile slots without additional machining. Due to the reduced clamping force and omitted rotation locks, these connecting sets should only be used in combination with panel elements and lightly loaded constructions. Low workload. To assemble a hole must be drilled into one of the profiles. The D2 hole can also be drilled through.

The connecting sets are used for connecting two aluminium profiles at right angles. The connection is nonrotating. For larger profiles several connecting sets can be mounted on the end for greater strength Low workload. Cut a thread in the end face core hole. Drill a through hole for tightening the screw in the opposing profile.

The aluminium profile is matched to the roller elements. As a result, roller rails and roller tracks can be realised. The different inserts permit modular and flexible setup.

Lightweight aluminium profile for weightoptimised constructions.