Press button - Import export

Quick and easy lifting device with swing shackle and safety bar against unintended release. The balls are unlocked by pressing the push button. When the push button is released the balls are securely locked. Corrosion and weather resistant. High tensile, hardened pin for extreme loads with the high wear resistance. Temperature range max. 250 °C. CE certified. Values X max, and F1 with 5x safety factor. Accessory: Receiver bushes 07784.

Ball lifting pins are quick and simple lifting devices with swing shackles. The balls are unlocked by pressing the push button. After releasing the push button, the ball is securely locked. Protected against corrosion and weather-resistant High-strength, hardened, extremely durable pin. TÜV-tested. Values X min., F1, F2 and F3 with 5x safety factor.

Locating cylinder tempered, black oxidised. Balls hardened, bright. Note: Locating cylinder with quick-clamp system for extra timesaving during setups. Insert the locating cylinder into the receiving hole and press the button. The three balls are pushed out and position the components. By tightening the set screw a 1/4 turn using an hexagonal key, the components are positively and securely held.

Ball lock pins are used for easy fastening or joining of components. The two balls are disengaged by pressing the push button and the pin can be slipped into holes in the workpieces. When the push button is released, the balls lock the connection securely. Shear force double shear (F) = S · τ aB max. The values given for the shear force are the theoretical breaking load. These are non-binding reference values without consideration of safety factors and exclude any liability. The values given are for information purposes only and do not constitute a legally binding assurance of properties. The load values have been calculated in accordance with DIN 50141. Each user must determine individually whether the ball lock pin is suitable for the respective application. Different materials in which the ball lock pins are used, weather conditions and wear can influence the determined values.

Ball lock pins are used for easy fastening or joining of components or workpieces. The two balls are disengaged by pressing the push button and the pin can be slipped into holes in the workpieces. Release the button to lock the balls and secure the connection. Form A is suitable for applications where high demands and precision are required. Shear force double shear (F) = S · τ aB max. The values given for the shear force are the theoretical breaking load. These are non-binding reference values without consideration of safety factors and exclude any liability. The values given are for information purposes only and do not constitute a legally binding assurance of properties. The load values have been calculated in accordance with DIN 50141. Each user must determine individually whether the ball lock pin is suitable for the respective application. Different materials in which the ball lock pins are used, weather conditions and wear can influence the determined values.

Ball lock pins are used for easy fastening or joining of components or workpieces. The two balls are disengaged by pressing the push button and the pin can be slipped into holes in the workpieces. When the push button is released, the balls lock the connection securely. If required, the ball lock pins can be fitted with a retaining cable. Shear force double shear (F) = S · τ aB max. The values given for the shear force are the theoretical breaking load. These are non-binding reference values without consideration of safety factors and exclude any liability. The values given are for information purposes only and do not constitute a legally binding assurance of properties. The load values have been calculated in accordance with DIN 50141. Each user must determine individually whether the ball lock pin is suitable for the respective application. Different materials in which the ball lock pins are used, weather conditions and wear can influence the determined values.

Ball lock pins are used for easy fastening or joining of components. The two balls are disengaged by pressing the push button and the pin can be slipped into holes in the workpieces. When the push button is released, the balls lock the connection securely. Shear force double shear (F) = S · τ aB max. The values given for the shear force are the theoretical breaking load. These are non-binding reference values without consideration of safety factors and exclude any liability. The values given are for information purposes only and do not constitute a legally binding assurance of properties. The load values have been calculated in accordance with DIN 50141. Each user must determine individually whether the ball lock pin is suitable for the respective application. Different materials in which the ball lock pins are used, weather conditions and wear can influence the determined values. Ball lock pins with high shear strength are identified by a groove marking on the pin.

Ball lock pins are used for easy fastening or joining of components or workpieces. The two balls are disengaged by pressing the push button and the pin can be slipped into holes in the workpieces. Release the button to lock the balls and secure the connection. If required, the ball lock pins can be fitted with a retaining cable. The hardened, high-tensile stainless steel pin permits extreme loads with low wear. Shear force double shear (F) = S · τ aB max. The values given for the shear force are the theoretical breaking load. These are non-binding reference values without consideration of safety factors and exclude any liability. The values given are for information purposes only and do not constitute a legally binding assurance of properties. The load values have been calculated in accordance with DIN 50141. Each user must determine individually whether the ball lock pin is suitable for the respective application.

Virtually painfree lancing Clixmotion technology controls the lancet’s movement Less sidetoside motion of the lancet means less skin damage Turn the rotatable cap for 11 penetration depth settings for different skin types The AccuChek Softclix lancets are precisely manufactured for precise entry Additional specification Penetration Depth 11 fixeddepth options, set with the rotatable cap Penetration Range 0.8 to 2.3 mm Lancing Technology Clixmotion Technology Weight 21 g Alternative Site Testing AST cap provided Needle Diameter 0.4 mm Gauge 28 Coating Silicon How to use the AccuChek Softclix lancing device The AccuChek Softclix lancing device is small and easy to operate, with onehand priming and lancing. Pull off the cap. Insert a new lancet into the lancet holder and push it in until it clicks. Press the cap on again until it clicks. Rotate the cap until the desired penetration depth is set. Press the priming button down until it clicks.

Moisture meter Name: BD-10 building materials moisture meter - Inspection Material: Floorings, Floors, Walls, Drywall, Ceilings, Building materials, Wood Mc: 6-40% on wood 0–100 reference scale for non-wood building materials Calibrations: Wood Overview Easy to operate and easy to read, the BD-10 measures moisture in wood and other non-wood building materials. For those who prefer an analog display, the BD-10 is a great alternative to the digital BD-2100. The BD-10 is a great entry level meter, and is ready to go with a single button press! Your Benefits: Easy-to-read analog display Two scales: • Wood Scale - 6% - 40% moisture range. Use for flooring and building material such as wood studs, floor joists, subfloors • Reference Scale - Reads from 0 - 100 on a relative basis. Use on non-wood materials such as concrete, plaster, and insulation Built-in calibration check Integral contact pins mounted on top of meter provide 8mm (5/16”) penetration Built-in connector accepts any De

Moisture meter Name: BD-10 building materials moisture meter - Restoration Material: Floorings, Floors, Walls, Drywall, Ceilings, Building materials, Wood Mc: 6-40% on wood 0–100 reference scale for non-wood building materials Calibrations: Wood Overview Easy to operate and easy to read, the BD-10 measures moisture in wood and other non-wood building materials. For those who prefer an analog display, the BD-10 is a great alternative to the digital BD-2100. The BD-10 is a great entry level meter, and is ready to go with a single button press! Your Benefits: Easy-to-read analog display Two scales: • Wood Scale - 6% - 40% moisture range. Use for flooring and building material such as wood studs, floor joists, subfloors • Reference Scale - Reads from 0 - 100 on a relative basis. Use on non-wood materials such as concrete, plaster, and insulation Built-in calibration check Integral contact pins mounted on top of meter provide 8mm (5/16”) penetration Built-in connector accepts any D

Einhell mini remote control HS 434/6, 434 MHz 6-channels Coding: 16.7 million possibilities, for garage door operators BGT 63, BM 60, TA 160, TA-G 63, TA-G 83, TA-G 103, GTA 160, GTA 163, side hinged gate operator AFA 2601,EFA 1200, FA-G 2601, FAG 1601 Dimensions: 38 x 50 x 15 mm, battery: 23 A, 12 V Programming the transmitters: Hold the learning key located in the operator down for 4 seconds until the red control LED goes on. Then release the button and press the chosen control button on the manual transmitter. The red LED now off. The control code has now been stored. Note: You can store a max. 3 manual transmitters in the operator. If a fourth transmitter is stored, the code set for the first transmitter is lost. The control code is not lost in case of power failure. With malfunction pull the mains plug and repeat operation. If you want to use more than 3 transmitters, an additional receiver must be installed in the receiver /operator, than you may order transmitter...

Control apps remotely by using the S-Pen connected to Galaxy Note 9 via Bluetooth Low Energy (BLE). You can quickly launch apps, such as the camera or gallery app, by pressing and holding the S-Pen button. While using apps, you can use certain features by pressing the S Pen button once, or switch between the front and rear cameras by pressing the button twice. Launch the Settings app, tap Advanced features > S Pen > S Pen remote, and then tap the switch to activate the feature. Official replacement S Pen 4096 levels of pressure sensitivity

Small investment, peak performance Within 18 months, your Braun shaver will cut an average of 6,000,000 hairs. In accomplishing this substantial task, the cutting parts will gradually wear out and your shave may become less close and comfortable. That’s why Braun recommends changing your shaver’s foil and cutter block every 18 months to maintain your shaver’s maximum performance. For an efficient shave every day. How to replace your shaver head? For older models which have a foil and a cutter block as two independent parts you will need to change the parts in two steps: First remove the foil, either by pressing the release button if your shaver has one, or by pulling the foil. Next rotate the cutter block by 90 degrees and pull it off, holding it at the ends to avoid touching the blades. To fit new parts, simply carry out the same procedure in reverse.

Grain moisture meter for maize, rye, Triticale, wheat, barley, oats, rape, soybeans, horse beans, sunflower seeds, sorghum millet and millet, mustard seeds, buckwheat, peeled and unpeeled rice, further species on request The humimeter FS1 grain moisture tester is a powerful and handy humidity measuring instrument for grain, for determining the water content of many grain types. Thanks to the Hold function the measuring value can be frozen on the display of the grain moisture tester until another button is pressed. To increase the measuring accuracy and reproducibility, different hectolitre weight classes are stored in the device. This ensures that the bulk density doesn´t affect the measuring result. The whole grain moisture tester series is calibrated and checked according to the calibratable kiln-drying method EN-ISO 712. Simultaneously, the moisture meter for grain also measures the sample temperature and includes it in the calculation of the measuring result.

Illuminated glasses with an electroluminescent wire around the edge of the glasses. Powered by a box containing two batteries (also available with a battery built into the temples of the glasses). 3 light functions: slow / fast flashing / steady light, simply press the button on the case to change mode A great light-up accessory to give to your customers or the public at a concert, festival, show or nightclub, for example.

Discover your sparkling drink in a unique light dress with 7 different colours. The Elysée champagne flute combines tradition and refinement in a luminous plastic flute. Extremely easy to use, just press the light button on the bottom to switch it on. The luminous flutes are reusable and washable (removable parts), so they're a pleasure to use every evening! Use the button to choose from 7 different colours, or opt for the continuous change mode.