Results for
FERRUM-MASCHINEN EIN BEREICH DER KMS AUTO UG (HAFTUNGSBESCHRÄNKT)
Germany
Injector nozzle with control for FERRUM wheel loaders . Will be delivered like shown.
Request for a quoteARUBIS
Belgium
In addition to the range of industrial plugs, Plugtite has developed a range of nozzle adaptors to be used during maintenance of hydraulic lines and channels. Resistance to most oils and chemicals Temperature range from -25°C up to 90°C Does not shrink, leak or discolor Resistant to sunlight for greater shelf life Does not split/crack or deteriorate Easy to use. Insert, squeeze, press home and apply air-gun The compressed rubber ensures a tight fit By using the plugtite rubber nozzle adaptor in conjunction with an air gun it prevents splash-back of any oils, chemicals, liquids, or other debris from the channel /tube/pipe whilst cleaning under high pressure, thereby protecting both the user and the environment in and around the equipment from contamination, and, at the same time ensures that all the air pressure is directed into the channel ensuring a stronger pressure for improved performance.
SCHMITTER HYDRAULIK GMBH
Germany
Category Hydraulic hoses and fittings / Machines and tools / Cleaning / Tube die nozzles Product number supplier 260010402
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Category Diesel technology / Sealings diesel fuel systems / Nozzle rings Product number supplier 110240
Request for a quoteECKARDT SYSTEMS GMBH
Germany
Spit nozzle SD 17: version for pin-point and linear application The pneumatically operated SD 17 is also available as a spit nozzle version. The fully spray valve has been specifically developed for pin point and linear application of oils, release agents and other low-viscosity media; it maintains its precision at certain distances between the nozzle and the application object. The spit nozzle SD 17 is particularly suitable for precision lubrication tasks of components and tools; it can also be setup for higher viscosities via an optionally selectable heating unit.
Request for a quoteECKARDT SYSTEMS GMBH
Germany
High-tech system for maximum process reliability. Automatic nozzle SDA 30: high-tech system for maximum process reliability The SDA 30 is an integrated system consisting of a nozzle and a control module. The nozzle is equipped with a Hall sensor that monitors and controls the position of the nozzle needle. All operational settings/adjustments (oil rate and so forth) are automated via the controller of the proprietary Eckardt control unit. This makes it possible to control up to four nozzles at the same time.
Request for a quoteECKARDT SYSTEMS GMBH
Germany
Spray nozzle SD 30: flexibly controlled spray width The SD 30 is also made of high-quality stainless steel. Thanks to its rugged design it is particularly suitable for spray tasks that demand high performance in continuous operations. As a special characteristic it is possible to adjust the width of the spray jet - either manually or via remote control.
Request for a quoteECKARDT SYSTEMS GMBH
Germany
Spray nozzle SD 25: compact dimensions for universal deployment The pneumatically control SD 25 is a medium-size nozzle made entirely from stainless steel. Distinguished by an extremely attractive price-performance ratio it is particularly suitable for a wide range of tasks. It is possible to apply the media with a flat or round spray. The nozzle is available as a flange version with switching valve.
Request for a quoteECKARDT SYSTEMS GMBH
Germany
Spray nozzle SD 20: numerous application and setting options The SD 20 includes an integrated control valve with which it is possible to quickly and simply control the spray and control air. It is possible to adjust the spray width manually. This model is primarily envisaged for flat spraying tasks; however, round spray application is also an option. It is possible to control the SD 20 pneumatically or electrically.
Request for a quoteECKARDT SYSTEMS GMBH
Germany
Spray nozzle SD 17: solution for the tightest of installation spaces The SD 17 is predestined to apply low-viscous oils and release agents in confined conditions. Inserts from 0.2 to 1.5 mm can be used for flat or round spray application. It is optionally possible to place connections for three feed hoses (spray air, control air, sprayed material) on the top or the side of the nozzle.
Request for a quoteECKARDT SYSTEMS GMBH
Germany
Spray nozzle SD 16: precision application of fluid media The SD 16 ensures you are able to apply the thinnest films of media such as low-viscosity oils and release agents with precision. For example, the pneumatically controlled, compact nozzle can be integrated directly in a forming tool to facilitate targeted, practically mist-free wetting. Depending on the nozzle cap used it is possible to generate a flat or round spray.
Request for a quoteECKARDT SYSTEMS GMBH
Germany
Spray and spit nozzles Variety, precision, flexibility: the right solution for every spray task Uniform precision No matter if thin films are to be applied evenly or the smallest lubrication points need to be met with precision – we have the right spray nozzle for you. We have the right solution for all of your application tasks: from a spare part through to an individual standalone configuration to meet your requirements. Features & benefits • Infinitely variable, precise control (spray interval, pressure) • Pneumatic or electric control • Low mist nozzle caps for flat or round spraying • Self-cleaning Design versions and details Spray nozzle SD 16: precision application of fluid media The SD 16 ensures you are able to apply the thinnest films of media such as low-viscosity oils and release agents with precision. For example, the pneumatically controlled, compact nozzle can be integrated directly in a forming tool to facilitate targeted, practically mist-free wetting. Depending o
Request for a quoteDIERMEIER ENERGIE GMBH
Germany
Description Castrol Radicool SF is a silicate-free long-life coolant concentrate (OAT technology). Castrol Radicool SF offers excellent corrosion protection. It can be used in gasoline and diesel engines (also aluminum and gray cast iron) . Castrol Radicool SF has the optimal effect in a mixing ratio of 1:1 with water. This results in frost protection down to -37°C and the best corrosion protection. Do not use Castrol Radicool SF undiluted Application Frost protection/ Proportion of Castrol Radicool SF dissolved in water: -20°C/ 35% -25°C/ 40% -30°C/ 45% -37°C/ 50% Advantages The special OAT Technology ensures long coolant change intervals. Castrol Radicool SF protects against corrosion, deposits in the cooling system and overheating. Castrol Radicool SF offers: -Protection against hard water -Effective cooling effect -Excellent corrosion protection -Very good elastomer compatibility -Protection against cavitation -Contains Bitrex - to protect against ingestion
Request for a quoteMAGAGER, UNIPESSOAL, LDA
Portugal
5 Nozzle Scarifier with small anchors Reinforced with double springs. Width 1.20 m Working width 1.13 m
Request for a quoteMAGAGER, UNIPESSOAL, LDA
Portugal
5 Nozzle Scarifier with small anchors Reinforced with double springs. Width 1.00 m Working width 0.93 m
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
K-TECH ELECTRONIC VERTRIEBS GMBH
Germany
In contrast to chamber devices, the vacuum sealer AZ450 from AIRZERO works with a suction nozzle. This principle offers advantages Since only the bag and not the entire chamber is emptied, the process is faster. Lower gas consumption when gassing (only the bag is gassed and not the entire chamber). The gas is blown into the bag in a targeted and controlled manner. No limitation of the bag length by the chamber. Bar goods can therefore also be processed. Compact desktop device. double sealing (up/down) ejektor vakuum pump (air pressure required) gas flushing digital vakuum display 4 programms can be saved housing of stainless steel
Request for a quoteCREISCENDO
France
Founded in 1976 , the POK company is one of the European leaders in the manufacture of firefighting equipment . POK is recognized worldwide for its know-how and the quality of its products. For more than forty years, our teams have been dedicated to innovation, quality and customer satisfaction. We are at the service of the men and women who, thanks to our products, protect and save lives. This mission is at the heart of POK DNA
Request for a quoteCENTRIMAX - WINKELHORST TRENNTECHNIK GMBH
Germany
Type: STSX 612 Manufacturer: Alfa Laval Description: Nozzle Separators Equipment: Frame, Bowl, Motor, Hood, Valves, Foundation frame, Tools, Controls, Manual and spare parts list
Request for a quoteCENTRIMAX - WINKELHORST TRENNTECHNIK GMBH
Germany
Type: STSX 512 Manufacturer: Alfa Laval Description: Nozzle Separators Equipment: Frame, Bowl, Motor, Hood, Valves, Foundation frame, Tools, Controls, Manual and spare parts list
Request for a quoteCENTRIMAX - WINKELHORST TRENNTECHNIK GMBH
Germany
Type: STSX 217 S-31 Manufacturer: Alfa Laval Description: Nozzle Separator Equipment: Frame, Bowl, Motor, Hood, Valves, Foundation frame, Tools, Controls, Manual and spare parts list Bowl type: Peripheral nozzles Bowl inlet: Gravity discharge Bowl outlet of light liquid: Fixed paring device Bowl outlet of heavy liquid: Gravity discharge Bowl design: Bowl for clarification Drive: Belt drive
Request for a quoteCENTRIMAX - WINKELHORST TRENNTECHNIK GMBH
Germany
Type: STQX 610 S-34 Manufacturer: Alfa Laval Description: Nozzle Separator Equipment: Frame, Bowl, Motor, Hood, Valves, Foundation frame, Tools, Controls, Manual and spare parts list Bowl type: Peripheral nozzles, solids recirculation Bowl inlet: Gravity discharge Bowl outlet of light liquid: Fixed paring device Bowl outlet of heavy liquid: Gravity discharge Bowl design: Bowl for clarification Drive: Direct drive
Request for a quoteCENTRIMAX - WINKELHORST TRENNTECHNIK GMBH
Germany
Type: STQX 610 Manufacturer: Alfa Laval Description: Nozzle Separators Equipment: Frame, Bowl, Motor, Hood, Valves, Foundation frame, Tools, Controls, Manual and spare parts list
Request for a quoteCENTRIMAX - WINKELHORST TRENNTECHNIK GMBH
Germany
Type: STQX 512 S-31 Manufacturer: Alfa Laval Description: Nozzle Separator Equipment: Frame, Bowl, Motor, Hood, Valves, Foundation frame, Tools, Controls, Manual and spare parts list Bowl type: Peripheral nozzles, solids recirculation Bowl inlet: Gravity discharge Bowl outlet of light liquid: Fixed paring device Bowl outlet of heavy liquid: Gravity discharge Bowl design: Bowl for clarification Drive: Belt drive
Request for a quoteCENTRIMAX - WINKELHORST TRENNTECHNIK GMBH
Germany
Type: STQX 512 Manufacturer: Alfa Laval Description: Nozzle Separators Equipment: Frame, Bowl, Motor, Hood, Valves, Foundation frame, Tools, Controls, Manual and spare parts list
Request for a quoteCENTRIMAX - WINKELHORST TRENNTECHNIK GMBH
Germany
Type: STQX 320 S-31 Manufacturer: Alfa Laval Description: Nozzle Separator Equipment: Frame, Bowl, Motor, Hood, Valves, Foundation frame, Tools, Controls, Manual and spare parts list Bowl type: Peripheral nozzles, solids recirculation Bowl inlet: Gravity discharge Bowl outlet of light liquid: Fixed paring device Bowl outlet of heavy liquid: Gravity discharge Bowl design: Bowl for clarification Drive: Belt drive
Request for a quoteCENTRIMAX - WINKELHORST TRENNTECHNIK GMBH
Germany
Type: STQX 320 Manufacturer: Alfa Laval Description: Nozzle Separators Equipment: Frame, Bowl, Motor, Hood, Valves, Foundation frame, Tools, Controls, Manual and spare parts list
Request for a quoteCENTRIMAX - WINKELHORST TRENNTECHNIK GMBH
Germany
Type: STQX 217 S-31 Manufacturer: Alfa Laval Description: Nozzle Separator Equipment: Frame, Bowl, Motor, Hood, Valves, Foundation frame, Tools, Controls, Manual and spare parts list Bowl type: Peripheral nozzles, solids recirculation Bowl inlet: Gravity discharge Bowl outlet of light liquid: Fixed paring device Bowl outlet of heavy liquid: Gravity discharge Bowl design: Bowl for clarification Drive: Belt drive
Request for a quoteResults for
Nozzles - Import exportNumber of results
404 ProductsCompany type
Category