Non-ferrous metal - Import export

Pig iron is one of the most liquid alloys due to its technical qualities and optimal price. Improvement of production and technological processes, updating of equipment and the qualifications of our specialists allow us to offer our customers high quality casting and service. Casting of cast iron by the method of casting in sandy clay molds The size of the castings 460 mm x 360 mm; Casting height up to 400 mm; Casting weight from 0.2 kg to 20 kg; The productivity of each line is 120 molds per hour. Casting of cast iron by the method of casting in sandy clay molds The size of the castings 1550 mm x 1200 mm; Casting height up to 600 mm; Casting weight from 50 kg to 2500 kg; Productivity 6 10 molds per hour. cast iron of the following grades gray cast irons SCh 15, SCh 20, etc.; high strength cast irons VCh 450 10, VCh 400 15, VCh 420 12, VCh 507, VCh 603, etc.; low alloyed silicon heat resistant and wear resistant cast irons ChKh, IChKh, ChS, ZhChS

Brass of two or more elements of the periodic table. Often it is copper, zinc and alloying link that impart positive attributes. Nowadays, many brass products are easily replaced by copper ones. In Ukraine, there are often two types of brass rolled metal products. Simple alloys of brass contain two components (copper and zinc) in the name there is a single letter and a two digit number of copper. A bright representative of this range is L63. Brass which contains 63% copper and 37% zinc. Special brass contains more than two elements. The name contains more designating signs due to additional alloying components of the periodic table. A bright representative on the market of brass ЛС59 1, one more percent of lead is concentrated there. From the above, the brightest representatives of brass on the Ukrainian market are L63 and LS59 You can contact us by mail - marketing@stalevar.com or by phone +380675624220.

We are the best source for ferrous scrap metal and non-ferrous scrap metals. With five recycling locations scattered around EU, and an active demolition and dismantling service we have a huge supply of scrap metal. In addition, we buy scrap metal from national and international customers and resell it to people just like you at affordable prices. As one of the largest scrap metal dealers in the EU, our business, for the past 40 years, has always focused on quality. So while we have a huge supply of scrap metal it is all graded and sorted according to the standards of the metal industry. What that means for you is that when you buy scrap metal you are not just buying a ton of copper, but a ton of copper that is sorted, process and rated according to the standards set forth by the metal industry. We accept a wide variety of ferrous and non-ferrous scrap and surplus metal products.

We are the best source for ferrous scrap metal and non-ferrous scrap metals. With five recycling locations scattered around EU, and an active demolition and dismantling service we have a huge supply of scrap metal. In addition, we buy scrap metal from national and international customers and resell it to people just like you at affordable prices. As one of the largest scrap metal dealers in the EU, our business, for the past 40 years, has always focused on quality. So while we have a huge supply of scrap metal it is all graded and sorted according to the standards of the metal industry. What that means for you is that when you buy scrap metal you are not just buying a ton of copper, but a ton of copper that is sorted, process and rated according to the standards set forth by the metal industry. We accept a wide variety of ferrous and non-ferrous scrap and surplus metal products.

We are the best source for ferrous scrap metal and non-ferrous scrap metals. With five recycling locations scattered around EU, and an active demolition and dismantling service we have a huge supply of scrap metal. In addition, we buy scrap metal from national and international customers and resell it to people just like you at affordable prices. As one of the largest scrap metal dealers in the EU, our business, for the past 40 years, has always focused on quality. So while we have a huge supply of scrap metal it is all graded and sorted according to the standards of the metal industry. What that means for you is that when you buy scrap metal you are not just buying a ton of copper, but a ton of copper that is sorted, process and rated according to the standards set forth by the metal industry. We accept a wide variety of ferrous and non-ferrous scrap and surplus metal products.

We are the best source for ferrous scrap metal and non-ferrous scrap metals. With five recycling locations scattered around EU, and an active demolition and dismantling service we have a huge supply of scrap metal. In addition, we buy scrap metal from national and international customers and resell it to people just like you at affordable prices. As one of the largest scrap metal dealers in the EU, our business, for the past 40 years, has always focused on quality. So while we have a huge supply of scrap metal it is all graded and sorted according to the standards of the metal industry. What that means for you is that when you buy scrap metal you are not just buying a ton of copper, but a ton of copper that is sorted, process and rated according to the standards set forth by the metal industry. We accept a wide variety of ferrous and non-ferrous scrap and surplus metal products.

We are the best source for ferrous scrap metal and non-ferrous scrap metals. With five recycling locations scattered around EU, and an active demolition and dismantling service we have a huge supply of scrap metal. In addition, we buy scrap metal from national and international customers and resell it to people just like you at affordable prices. As one of the largest scrap metal dealers in the EU, our business, for the past 40 years, has always focused on quality. So while we have a huge supply of scrap metal it is all graded and sorted according to the standards of the metal industry. What that means for you is that when you buy scrap metal you are not just buying a ton of copper, but a ton of copper that is sorted, process and rated according to the standards set forth by the metal industry. We accept a wide variety of ferrous and non-ferrous scrap and surplus metal products.

We are the best source for ferrous scrap metal and non-ferrous scrap metals. With five recycling locations scattered around EU, and an active demolition and dismantling service we have a huge supply of scrap metal. In addition, we buy scrap metal from national and international customers and resell it to people just like you at affordable prices. As one of the largest scrap metal dealers in the EU, our business, for the past 40 years, has always focused on quality. So while we have a huge supply of scrap metal it is all graded and sorted according to the standards of the metal industry. What that means for you is that when you buy scrap metal you are not just buying a ton of copper, but a ton of copper that is sorted, process and rated according to the standards set forth by the metal industry. We accept a wide variety of ferrous and non-ferrous scrap and surplus metal products.

We are the best source for ferrous scrap metal and non-ferrous scrap metals. With five recycling locations scattered around EU, and an active demolition and dismantling service we have a huge supply of scrap metal. In addition, we buy scrap metal from national and international customers and resell it to people just like you at affordable prices. As one of the largest scrap metal dealers in the EU, our business, for the past 40 years, has always focused on quality. So while we have a huge supply of scrap metal it is all graded and sorted according to the standards of the metal industry. What that means for you is that when you buy scrap metal you are not just buying a ton of copper, but a ton of copper that is sorted, process and rated according to the standards set forth by the metal industry. We accept a wide variety of ferrous and non-ferrous scrap and surplus metal products.

We are the best source for ferrous scrap metal and non-ferrous scrap metals. With five recycling locations scattered around EU, and an active demolition and dismantling service we have a huge supply of scrap metal. In addition, we buy scrap metal from national and international customers and resell it to people just like you at affordable prices. As one of the largest scrap metal dealers in the EU, our business, for the past 40 years, has always focused on quality. So while we have a huge supply of scrap metal it is all graded and sorted according to the standards of the metal industry. What that means for you is that when you buy scrap metal you are not just buying a ton of copper, but a ton of copper that is sorted, process and rated according to the standards set forth by the metal industry. We accept a wide variety of ferrous and non-ferrous scrap and surplus metal products.

Concentrated, acid preparation for cleaning and disinfecting all kinds of surfaces - in the kitchen, gastronomy, food industry - resistant to acids. It is also perfect for sanitary facilities, locker rooms, showers and other rooms with high humidity. Recommended for disinfection of machines and devices made of stainless steel and non-ferrous metals in contact with food or animal feed. It does not contain toxic substances. Removes current impurities in the form of inorganic deposits of lime origin, rust infiltrations and stubborn dirt. Odorless. PZH certificate

TAGRED FLAP GRINDING DISC 125mm 22.23mm P40 Flap disc made of cloth flaps with corundum grain on a fiberglass disc, suitable for machining steel, aluminium, wood, non-ferrous metals and other materials. TAGRED discs are characterized by high precision and reliability. TECHNICAL DATA: Disc diameter: 125 mm Hole diameter: 22.23mm Gradation: 40 Maximum rotational speed: 12200 rpm Maximum linear speed: 80 m/s

TAGRED FLAP GRINDING DISC 125mm 22.23mm P36 Flap disc made of cloth flaps with corundum grain on a fiberglass disc, suitable for machining steel, aluminium, wood, non-ferrous metals and other materials. TAGRED discs are characterized by high precision and reliability. TECHNICAL DATA: Disc diameter: 125 mm Hole diameter: 22.23mm Gradation: 36 Maximum rotational speed: 12200 rpm Maximum linear speed: 80 m/s

Profile guide rails can be screwed on from above. The profile guide rails are available in four sizes and one or more carriages can be assembled on them. 4row versions with round arch profile. The tracks of the profile guide rails are set below an angle of 45° and thus can carry loads from all directions. The profile guide rails correspond to the market standard and can replace linear guides of the same design by other manufacturers. On request Lengths up to a max. 3960 mm.

Body carbon steel. Balls roller bearing steel. Diverters plastic. Standard guide carriage with recirculating ball guidance precision N not preloaded (Z0). With doublesided end seal. 4row versions with round arch profile. The profile guide rail tracks are arranged at 45° and can accept loads from all directions. High dynamic values v = 5 m/s. Applicable temperature in continuous use max. 80 °C. On request Various precision and preload classes. Drawing reference 1) ground ref. edge

Boride grinding and polishing stones for all shaping and fine work on tools and contours on steel and non-ferrous metals.

Light, spherical, mineral and ferrite-free glass beads blasting abrasive WIWOX® GP. Ideal for bright, matt-gloss surfaces. The area of application ranges from the cleaning of delicate tools to the deburring of precision parts through to the finishing of precious and non-ferrous metals.

One of our specialties are specialized products for the metalworking industry. In this area, we offer a large range of non-water-miscible and water-miscible products and emulsions that are suitable for processing aluminum, non-ferrous metals, steel and stainless steel. We also have a comprehensive range of customer-specific solutions for manufacturing processes such as forming, deep drawing, punching, fine blanking, machining, deep drilling, sawing and eroding. Thanks to our experienced team of advisors and advice at eye level, we can find the right product for every application.

Water-miscible premium cooling lubricant Description Castrol Alusol ABF 47 is a boron, amine, formaldehyde releaser and chlorine-free water-miscible high-performance cooling lubricant. It contains a unique additive package that improves machine performance and surface quality, ensures excellent stability and reduces machining costs. Castrol Alusol ABF 47 is suitable for both central systems and individual systems. Application Castrol Alusol ABF 47 was specially developed for processing aluminum alloys. The product can also be used to process low-alloy steels and non-ferrous metals .

Replacement product ARAL SAROL 474 EP Semi-synthetic water-miscible premium cooling lubricant Description Castrol Alusol™ ABF 10 is a boron, amine, formaldehyde releaser and chlorine-free, semi-synthetic water-miscible high-performance cooling lubricant. It contains a unique additive package that improves machine performance and surface quality, ensures excellent stability and bioresistance and reduces machining costs. Castrol Alusol ABF 10 is suitable for both central systems and individual systems. Application Castrol Alusol ABF 10 was specially developed for processing aluminum alloys. The product can also be used to process low-alloy steels and non-ferrous metals .

Water-miscible premium cooling lubricant Description Castrol Alusol ABF 47 is a boron, amine, formaldehyde releaser and chlorine-free water-miscible high-performance cooling lubricant. It contains a unique additive package that improves machine performance and surface quality, ensures excellent stability and reduces machining costs. Castrol Alusol ABF 47 is suitable for both central systems and individual systems. Application Castrol Alusol ABF 47 was specially developed for processing aluminum alloys. The product can also be used to process low-alloy steels and non-ferrous metals .

Replacement product ARAL SAROL 474 EP Semi-synthetic water-miscible premium cooling lubricant Description Castrol Alusol™ ABF 10 is a boron, amine, formaldehyde releaser and chlorine-free, semi-synthetic water-miscible high-performance cooling lubricant. It contains a unique additive package that improves machine performance and surface quality, ensures excellent stability and bioresistance and reduces machining costs. Castrol Alusol ABF 10 is suitable for both central systems and individual systems. Application Castrol Alusol ABF 10 was specially developed for processing aluminum alloys. The product can also be used to process low-alloy steels and non-ferrous metals .

WIWOX® 340 is a weakly alkaline cleaning agent for grease, oil and oil carbon soiling. Very suitable for pre-cleaning or basic cleaning of soiled steel, cast iron and non-ferrous metal or plastic parts in an ultrasonic bath or in a spray cleaning system. After cleaning and without water rinsing, the parts are temporarily protected against corrosion. The final drying can be accelerated by blowing off with compressed air, a warm air flow or treatment in a drying cabinet. WIWOX® 340 can be used in a concentration of 5 – 7 %. Dilution with water depends on the degree of contamination and the intended exposure time. The bath should have a temperature of approx. 60° C. The bath should be kept at a constant temperature. In the field of precision mechanics, longer exposure times are possible depending on the degree of contamination.

Cortec VpCI® 329 and Cortec VpCI® 329 D are corrosion inhibitor oils from Cortec Corporation, a leader in corrosion prevention. Both leverage VpCI® technology, creating a protective molecular layer on metals.However, they have distinct applications. Cortec VpCI® 329 is versatile, shielding ferrous and non-ferrous metals indoors and outdoors.It's easy to apply via dipping, spraying, or fogging and offers up to 24 months protection.Being water-based and free of hazardous solvents, it's environmentally friendly. Cortec VpCI® 329 D is specifically designed for outdoor ferrous metal protection. It includes additional inhibitors and water-displacing agents for enhanced resistance to harsh conditions while maintaining the 24-month protection period and compatibility with various metals.

Cortec VpCI® 322 is a concentrated, solvent-based oil safeguarding ferrous and non-ferrous metals from corrosion. Leveraging advanced VpCI® technology, it forms a thin, transparent film that protects against rust, even in hard-to-reach areas.This oil not only inhibits corrosion but also lubricates moving parts due to added anti-wear agents.Its low viscosity ensures easy application and penetration.Ideal for equipment, parts, and components during shipping, storage, or lay-up, VpCI® 322 safeguards a wide range of metals, including carbon steel, stainless steel, copper, brass, aluminium, and galvanised steel.

Cortec VpCI® 609/S Biodegradable Corrosion Inhibiting Powder. Protect your metals sustainably with Cortec VpCI® 609/S.This innovative, biodegradable powder shields ferrous and non-ferrous metals from corrosion.Environmentally friendly yet highly effective, it's perfect for various applications.Easily applied by dusting or fogging, it offers long-lasting protection in packaging, storage, and more.Its versatility extends to desiccant use, removing moisture.Compliant with RoHS and REACH, it's safe and reliable.Ideal for metals in challenging environments, this powder ensures durability and peace of mind. Key benefits: Biodegradable formula, wide metal protection, simple application, diverse uses, long-lasting, desiccant properties, safety and compliance.

Cortec EcoLine® 3220 is a cutting-edge, temporary, biobased coating engineered to safeguard metal surfaces from corrosion during storage and transit. Crafted with renewable, plant-derived components, this eco-friendly solution delivers exceptional corrosion protection without harmful chemicals or solvents.Key advantages include its biobased formula, reducing environmental impact, and its robust corrosion protection for ferrous and non-ferrous metals. Easy application and removal, compatibility with various metals, and a commitment to sustainability make it ideal for automotive, heavy equipment, aerospace, oil and gas, and general manufacturing sectors.

Cortec VpCI® 378 is a cutting-edge, patented corrosion inhibitor specifically formulated for oil-based products. Offering unparalleled protection for ferrous and non-ferrous metals, it's ideal for machinery, engines, and other critical equipment. Corrosion is a major threat to oil-based fluids like lubricants, greases, and hydraulic oils, causing wear, inefficiency, and equipment failure.Cortec VpCI® 378 combats this by forming a molecular shield on metal surfaces, blocking corrosive elements and preventing rust. It boasts multi-metal protection, vapor phase inhibition for added coverage, and synergy with other fluid additives. Beyond corrosion prevention, it enhances oxidation resistance, lubricity, and film strength.

Cortec VpCI® 387 Acrylic (Water-Based) Hi-Build Topcoat. High-performance, water-based acrylic topcoat offering superior corrosion protection for ferrous & non-ferrous metals. Leveraging Cortec's patented VpCI technology, it creates a molecular barrier against corrosion.Features high-build formula for excellent coverage & durability, while being eco-friendly with low VOCs.Offers strong adhesion, flexibility, and multi-metal protection.Ideal for maintenance, shipping, storage, and various industrial applications. Easy to apply by brush, roller, or spray.