Metal structures - Import export

Due to its extreme hardness, WIWOX® SG high-carbon cast steel abrasive reaches an extremely high blasting intensity right from the start. It is produced in a melting process and gets its round shape through the subsequent atomising process. The metallic structure of this low-carbon cast steel abrasive is decisive for its long service life.

Lightweight and strong folding chair, with white lacquered metal structure. Backrest and seat in 600D polyester, with matching foam padding on armrests and headrest. Matching carrying handle and available in a wide range of colours. Foldable Polyester 600D

Metal dowel for hollow structures The main purpose is to attach building materials to bases with low loadbearing capacity, for example: plasterboard, particle board or hollow materials. It is also used when frequent disassembly of the structure is necessary. Installation can be carried out in two ways: using special pliers, using a screwdriver.

The inverter machine VIKING 500A PRO is used for manual arc welding of metal blanks. The inverter has a functional control panel with a digital display that displays the main operating parameters. The device is equipped with overload protection and voltage surge protection. The technologies applied during the manufacture of VIKING 500A PRO devices allow performing any tasks in welding, surfacing and cutting metal structures for performing work with any kind of electrodes with a diameter of up to 6 mm and a maximum arc welding current of up to 500А (100% at 420 A). The welding inverter machine can be used at low temperatures and reduced supply voltage. Adjustable functions of hot start and arc reheat imply the ability to adjust the operation of the device with minimal spattering and allow you to perform work in any spatial position of the electrode and welded surfaces.

TORUS-255 has the widest possible range of arc welding currents (from 20 to 255 A), which makes it possible to use it both for welding very thin metals, including in the TIG mode (welding with non-consumable electrode), and for continuous welding of large metal structures using an electrode up to 6 mm in diameter. The operating margin in the ТОРУС-255 device is such that it can be effectively used not only for the MMA and TIG modes, but also in the surfacing and cutting modes. At the same time, the weight of the device itself is traditionally not big – only 5.7 kg. Like all devices of the ТОРУС line, ТОРУС-255 has increased reliability with all its maximum parameters. A 3-year manufacturer’s warranty is a guarantee of its high performance in the most severe operating conditions.

The Russian-manufactured inverter machine ТОРУС-320 is used for manual arc welding of metal blanks. The inverter has a functional control panel with a digital display that displays the main operating parameters. The metal housing is equipped with large ventilation holes in order to prevent overheating of internal components. The device is equipped with overload protection and voltage surge protection. The technologies applied during the manufacture of ТОРУС-320 devices allow performing any tasks in welding, surfacing and cutting metal structures for performing work with any kind of electrodes with a diameter of up to 6 mm and a maximum arc welding current of up to 320A (100% at 300A). The welding inverter machine can be used at low temperatures and reduced supply voltage.

Hot rolled steel hexagon GOST 2879 and cold rolled (calibrated) GOST 8560 are produced from carbon, alloy, nickel containing, tool, spring spring, automatic, bearing and heat resistant steels. The main purpose of the metal hexagon is the further production of hardware products for wrenches and tools. Steel workpieces are machined mechanically on lathe, turret lathe and CNC machines. Also, the product can be found in parts and assemblies of cars, agricultural machinery and other machines, car building, construction. Overall dimensions of the produced metallurgical rolled products 8 100 mm, length from 2 to six meters. Measurement of hot rolled and cold rolled hexagon is made on the flat part (d). You can buy (order) a steel hexagon by calling us by phone and writing to the website widget. All of its assortment presented is available in the covered hangar. Hexagon price = factory price, its adjustment is possible upon agreement of the delivery schedule

Hot rolled angle is in demand and applicable in mechanical engineering, construction and in everyday life. It is used to make Concrete supports; Mounts; Brackets; Arches; Ladders, stepladders; Wall partitions; Armored doors; Fences and fences; Sports equipment and exercise equipment; Children's playgrounds (playgrounds); Lifting equipment; Steel structures ; Parts and assemblies (mechanical engineering). By the type of execution, it is rolled with equal edges (equal flanges) GOST 8509, with different edges (unequal flanges ) GOST 8510 and bent. An equal flange metal corner is rolled at Ukrainian factories of the established length 6 and 12 meters, the geometry of the shelf is from 25 to 300 mm, the thickness of the edge is from 3 mm or more. You can contact us by mail - marketing@stalevar.com or by phone +380675624220.

Seamless (seamless) pipe is produced and complies with GOST 8731; 8732; 8733; 8734 in our State and in neighboring countries and is in demand at production sites, construction of housing and non residential premises, mechanical engineering, car building, manufacturing of mechanical blanks, various kinds of metal structures and products. The seamless pipe is used for laying electrical wires, for transporting oil products, chemicals, in drilling rigs, refrigeration and traction units. Thick walled seamless round pipe is used for the production of workpieces obtained by the mechanical (turning) method and the defense industry of our country. Thick walled pipe can significantly save time and money for machining parts, while saving the cutting turning tool. Seamless profile pipes are designed for the production of metal structures with increased mechanical requirements and loads. You can contact us by mail - marketing@stalevar.com or by phone +380675624220.

Products from a bent profile are made from hot rolled (hc) and cold rolled (hc) sheets (rolls) with a thickness of 1.5 to 5 mm on special industrial bending machines and guillotines with consistent dimensional data, in accordance with GOST (TU). The range of metal products obtained from a flat billet bent channel GOST 8278; bent corner GOST 19771. The bent channel is designed to significantly lighten and reduce the cost of the final cost of metal structures and other demanded products. Despite the fact that it is less durable in comparison with the hot rolled analogue , its use is in demand in mechanical engineering, furniture factories and manufacturing companies. The length of the billet of the channel is 6 meters, the width of the flange is from 30 to 200 mm, it is possible to manufacture a bent channel by special order . You can contact us by mail - marketing@stalevar.com or by phone +380675624220.

The hot rolled steel circle is produced at Ukrainian factories, it is an excellent material for the manufacture of a wide range of products produced by the mechanical method on lathes and cutting machines, metal structures , supports, and other products. The steel circle is in demand in mechanical engineering, manufacturing, construction. It is used for making bushings, cylinders, locks, guides, rods, grids, dumbbells, swings, horizontal bars, lattices, washers, linings, pins and other cylindrical products, seamless pipe . Hot rolled steel circle GOST 2590 88, its standard dimensions length from 4 to 6.3 m, thickness from 10 mm to 330 mm. One of the varieties of round products is a calibrated circle produced by the method of cold drawing, grinding, polishing the surface of the product, and the compliance of surface dimensions to microns, which does not require further mechanical processing. You can contact us by mail - marketing@stalevar.com or by phone +380675624220.

A thin walled pipe (furniture) is made of high quality sheet metal and is necessary to facilitate and, as a result, reduce the cost of the manufactured product (steel structures). A thin walled pipe is used in the production of parts for upholstered and cabinet furniture, according to the type of execution it can be square, rectangular, oval and round. Furniture pipes are used to make office, kitchen, bar stools, metal structures that do not carry heavy loads , such as racks, railings, bed frames, decorative parts, guides. The wall thickness in this case is in the range from 0.8 mm to 2.0 mm of small diameters, the length is no more than 6 lm. The theoretical weight of furniture pipes is calculated by analogy with a longitudinal welded pipe . Range, price All the assortment of thin walled pipes presented in the table is available in the warehouse of STALEVAR Company LLC . You can contact us by mail - marketing@stalevar.com or by phone +380675624220.

Wire rod is an excellent consumable for the production and manufacture of knitting, spring, welding wire; electrodes for electric arc welding; hardware products; masonry and other mesh; ropes (cable) ; formwork manufacturing; concrete structures; metal structures . Wire rod can be either hot or cold rolled carbon steel. It is drawn on special drawing machines by drawing to a thickness of 5 to 15 mm onto special winding spools. The weight of one coil of wire rod is on average from 160 kg, depending on the initial diameter, order or consignment of goods. A circle of small diameters is made from rolled hot rolled wire by cutting; the product can also be supplied in bars. Quality The quality of the wire rod corresponds to GOST 30136 and is confirmed by certificates. Steel grade 3PS, 1PS, 2PS, 1KP, 2KP, 3KP, 1SP, 2SP, 3SP. Rolled wire is produced with the following strength classes B standard; B increased. You can contact us by mail - marketing@stalevar.

I beam (I beam) is a type of metal product used for supporting structures and floors of automobile and railway bridges, tower, bridge and gantry cranes, crane girders, supports and other supporting structures. The main task of the beam is to carry the strength force to all types of permissible loads. Of all the presented type of metal products, it is the most durable. Depending on the bearing load, the selection of the beam is made. Do not overload the metal structure with the permissible size of the beam, as it may become unjustifiably expensive and difficult to transport. There are certain formulas and criteria for the selection of the required brand and size of the beam. If necessary, our qualified specialists will help you as much as possible to select the required sizes of metal products. The length of the I beam, as a rule, is 12 meters or more, and the width of the flange is from 10 to 50 cm. You can contact us by mail - marketing@stalevar.com or by phone +380675624220.

It is used in mechanical processing of metals and non-metallic structural materials in mechanical engineering (turning, milling, planing, chiseling and drilling). Hard alloys and composite materials based on tungsten carbide are widely used In the mining industry, as well as mixtures of tungsten carbide, titanium carbide, tantalum carbide (TT grade for particularly severe processing conditions, e.g. chiselling and planing of forgings made of heat-resistant steels, or impact drilling of heavy-duty materials). We buy scrap of the following categories: Tungsten 4, Tungsten 5, Tungsten 6

Prokura sell a large range of Hex Set Screws. Brass Hex Set Zinc Hex Set Galv Hex Set A2 Stainless Hex Set A4 Stainless Hex Set