Mechanical seals - Import export

Heavy Duty Grease Description Castrol Molub-Alloy 3136 has been developed for use in applications with high loads, adverse environmental influences and low movement speeds. It is successfully used in all known heavy industries such as steel, mining or construction. Castrol Molub-Alloy 3136 is a mineral oil-based lithium soap grease. It has a good sealing effect against contamination if mechanical seals are damaged or missing (sealing grease collar on the bearing). Castrol Molub-Alloy 3136 provides effective protection against corrosion and is resistant to aging. It is free of heavy metals such as antimony and lead. Light-colored solid lubricants offer excellent emergency running properties in the event of a lack of lubricant.

Castrol Molub-Alloy 777 NG series (05/20/2021) High-duty lubricating greases Description Castrol Molub-Alloy 777 NG high-duty lubricating grease was developed for high loads in unfavorable environmental conditions . It is manufactured and additived in such a way that it can withstand shock and heavy loads such as those found in the steel industry or in the construction industry, mining and forestry. To produce Castrol Molub-Alloy 777 NG, a mixture of high viscosity mineral oils and polymers are used, which form a tough lubricating film that can withstand shock loads and vibrations. The shear-stable thickener has a very good sealing effect against contamination if mechanical seals are damaged or missing (sealing grease collar on the bearing). The grease contains solid lubricants whose structure has been selected to meet the requirements of harsh operation in heavy industry

Castrol Molub-Alloy 777 NG series (05/20/2021) High-duty lubricating greases Description Castrol Molub-Alloy 777 NG high-duty lubricating grease was developed for high loads in unfavorable environmental conditions . It is manufactured and additived in such a way that it can withstand shock and heavy loads such as those found in the steel industry or in the construction industry, mining and forestry. To produce Castrol Molub-Alloy 777 NG, a mixture of high viscosity mineral oils and polymers are used, which form a tough lubricating film that can withstand shock loads and vibrations. The shear-stable thickener has a very good sealing effect against contamination if mechanical seals are damaged or missing (sealing grease collar on the bearing). The grease contains solid lubricants whose structure has been selected to meet the requirements of harsh operation in heavy industry . It shows a good affinity for metallic surfaces.

PAI material considers the most efficient fusible thermoplastic in terms of temperature resistance, chemical resistance and mechanical stress. Its mechanical strength at 205 °C surpasses many engineering plastics at room temperature. BIEGLO offers PAI finished parts of the following types: Torlon® 4203; 4301; 4275; 4435; 4645; 5030 (30% GF); 7130 (30% CF). Each type is best suited for a particular application. Polyamide-imide can be used for a lot of appliations like gears, rollers, plasma chamber hardware and wafer contact fixtures. In addition, PAI material is ideal for high-temperature thermal insulators, burn-in test sockets, valve seats, fasteners, mechanical connections, rollers, labyrinth seals, drive wheels, valve plates, vanes and support gaskets.

Domestic, agricultural, irrigation, industrial - Transfer and pressure Max temperature. water: 35º C Max sand content: 60 g/m3 Maximum starts per hour: 30 / h Asynchronous single-phase 230 V, three-phase 400 V - Class F Stator cooled with non-toxic and non-polluting mineral oil Stainless steel shaft (AISI 416) - IP 58 Protection Filter, liners, lid in 304 stainless steel Retainer and mechanical seal (aluminum axide-carbon-graphite) Mechanical seal in SIC/SIC on request Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration.

Domestic, agricultural, irrigation, industrial - Transfer and pressure Max temperature. water: 35º C Max sand content: 60 g/m3 Maximum starts per hour: 30 / h Asynchronous single-phase 230 V, three-phase 400 V - Class F Stator cooled with non-toxic and non-polluting mineral oil Stainless steel shaft (AISI 416) - IP 58 Protection Filter, liners, lid in 304 stainless steel Retainer and mechanical seal (aluminum axide-carbon-graphite) Mechanical seal in SIC/SIC on request Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration.

Motor immersed in cooking oil, non-toxic, non-polluting. Externally cooled by the pumped liquid. Insulation class F. Motor protection IP68. Thermal sensors built into the motor winding. Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration. Combination of stainless steel in the turbines with Noryl reinforced with fiberglass in the diffusers, offers excellent resistance to abrasion due to sand. Double seals, lip seals and carbon ceramic reinforced mechanical seal. Pump body, pump head and turbines in AISI304 stainless steel and shaft in AIS420 stainless steel.

Motor immersed in cooking oil, non-toxic, non-polluting. Externally cooled by the pumped liquid. Insulation class F. Motor protection IP68. Thermal sensors built into the motor winding. Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration. Combination of stainless steel in the turbines with Noryl reinforced with fiberglass in the diffusers, offers excellent resistance to abrasion due to sand. Double seals, lip seals and carbon ceramic reinforced mechanical seal. Pump body, pump head and turbines in AISI304 stainless steel and shaft in AIS420 stainless steel.