Manually operated - Import export

Grease filling device-hand-operated 25 kg-BE-Ø 310-335 mm specification Pump station Suction pipe Filling nipple, M 10 x 1 (12 670), included loose, for Conversion for grease guns from other brands Dust cover (17 194), container fastening (17 199) and Grease follower piston (17 320) Dust cap on filling coupling, secured with chain Packed in individual cartons Special features for filling lever, one-hand and Compressed air grease guns

Control valves and directional valves clear, block or change the flow direction of the medium used. They control the direction of the volume flow, i.e. the exit direction of a cylinder, and through start-stop commands the travel distance of the stroke. Our product range includes manual, pneumatic and electro-pneumatic actuated valves in 3/2-, 5/2- and 5/3-directional design. Directional valves acc. to NAMUR, supply units, base plates, logistics modules and two-handed safety control valves add to the assortment.

Manually actuated directional valves with a wide range of actuating elements for panel mounting in 84 possible combinations. Whether in 3/2 – 5/2 way, NC or NO function, linear or built in at 90° – You can implement your application with this valve series.

Large selection of manual directional control valves with different actuating elements. With lever at 90° / 45° or on the front. With adapter system for mushroom buttons, push buttons or rotary switches. Available in sizes 1/8 and 1/4 to 3/2, 5/2 and 5/3.

The mini clamp is characterised by its small size, positioning accuracy of the clamping arm, and lightweight construction. Mini clamps are fully self-locking. The clamping force is guaranteed even when the pressure is removed through the over dead-centre position of the toggle lever on the clamping arm. The permanent lubrication and special bearing bushings make the mini clamps maintenance-free. They can be operated using dry, oil-free air. The manual closing and locking using the hand lever. Pneumatic opening and closing. Attention: A 5/3-way valve is required, middle position vented. On request: Clamping arm without holes.

Housing aluminium. Precision tube nickel plated steel. Trapezoidal thread spindle steel. Note The doubletube linear actuator can be operated manually or electrically. Due to the short duty cycle, the units can be adjusted several times a day at low speed and with high stability. Width, length and height adjustment possible.

The new generation of our VH series valve terminals. Modern pneumatics with economical energy consumption, compact dimensions and high flow rates. With multipolar electrical connection with D-SUB 25-pin or flat connector as standard. Core items: Reduced dimensions (15mm) Low power consumption (0.85W) High flow rate for size Compact and clear design Metal construction for a long service life even under harsh environmental conditions Fast cycle times thanks to the latest generation of magnetic coils Manual operation easily accessible LED display integrated in the magnetic coil Connection strips with modular system All islands are delivered assembled and tested

age 1992 1 drilling head table model for hand operation slide plate manual handle Delivery time: immediately Ref: ST200187A Please ask for price. We ship and install worldwide!

Housing steel. Clamping lever plastic. Threaded spindle grade 12.9. Version Housing nickelplated. Clamping lever, spindle black oxidised. Note Manually operated clamping elements for static clamping tasks. Manual clamping process using the freely adjustable clamping lever. The floating clamp ensure symmetrical application of force onto the rail. Up to 50,000 static clamping cycles (B10d value). In general, a friction connection is created between the clamping element and the the linear guide on the open faces of the profile guide rail so that the ball guide tracks are not damaged. The retaining force is tested on an oil smeared profile guide rail. An adapter plate, dependent on the type of carriage used, is required for height adjustment.

In addition to the manually operated roller blinds, we also supply electric roller blinds. These roller blinds are available with an easily adjustable motor, a Somfy motor or a programmable motor. Can be controlled remotely Reliable and durable because the electric roller blind is more resistant to misuse compared to the manually operated roller blind Automatically controllable by programming function

The UniFill CO 2 / N 2O is an ergonomic filling system for a wide range of cylinders with weights up to 50 kilograms. Highlights Fill connection with quick connector or fast hand wheel Easy, precise and safe to operate Calibratable Many IT communication capabilities Optional printer and / or scanner Optional vacuum prior to filling Integrable pump control Legal for trade Technical Data Filling-Range: approx. 4 – 50 kg/ 9 – 110 lbs. fill weight Weighing range: 0-150kg/ 0-330lbs Scale division: 0-60kg - 20g, 60-150kg -50g Cylinders: up to Ø 300 x 1800 mm/ 11.8 x 70.9 in. Dimensions: approx. 600 x 600 x 1400 mm/ 24 x 24 x 55 in. Weight: approx. 100 kg/ 220 lbs. Weight Scales and Controls Digital, freely programmable SysTec IT 8000 industrial weighing terminal 999 storable cylinder type (PLU) Automatic filling process, manually operated solenoid relief valve Monitoring of fill weight, integrated tare weight control Enhanced software, i.e. topfilling (only the fill parameter must be set,

A very compact, mobile and user-friendly filling system for a wide range of cylinders with weights up to 6 kilograms. Highlights Variable filling connections Easy, precise and safe to operate Automatic filling process Anodized aluminum frame; stainless steel cover plate Optimal cost/performance ratio Build in pump Legal for trade Technical Data Filling-range: approx. 50g - 6kg/ up to 13 lbs. fill weight Weighing- range: up to 15 kg/ 35 lbs. Dimensions: approx. 600 x 400 x 1200 mm/ 24 x 16 x 47 in. Weight: approx. 50 kg/ 110 lbs. Weighing System Two load cells SysTec IT 1000 industrial weighing terminal Automatic tare setting Automatic shut-off at target weight Manually operated relief with ball valve Optional Filling Connections for Pico-Fill Filling unit for 1/2 in. trapezoid- and side-outlet valves Pneumatic press-on, cartridge filler and other connections on demand

DGS connection possibility Parallel operation with N + X redundancy or power expansion Possible operating modes 3 1 ph inputoutput 11 ph inputoutput Shared battery operation in parallel operation Service (manual) bypass as standard Double conversion (online topology) Intelligent battery management LCD display with setting function Remote administration

TYP C 044/S Cutting, stamping and bending device for axial components Description To facilitate the placement of short axial leaded components that must be cut before insertion into the circuit board to the appropriate length and bent to the required height and - if necessary - marked . This axial taped components are processed in high- components. In the device 044 C / S to be bent, the components are manually inserted into the device and processed by triggering the pneumatic foot switch. The high- axial component can be provided either at one or at both terminal wires with a bead for preventing falling out of the printed circuit board according to the manual setting operation. Components

Cutting, deburring and grinding operations, which are generally carried out with manual operations, are problematic in standardization and very risky in terms of HSSE. With robotic projects, we obtain the most precise results in a safe way.