Results for
NORELEM FRANCE
France
Reference surfaces precision machined Note: Ring bolts for lifting are supplied. A cover prevents the cavities filling with swarf. Drawing reference: machined faces: +0.2 mm/ +0.5 mm unmachined faces: ±2 mm
Request for a quoteNORELEM FRANCE
France
Grid spacing 50 ±0.02 mm. Tombstones with grid holes are used on horizontal machining centres. The alphanumerically labelled grid holes guarantee a defined assignment of clamping elements by repeat setups. The tombstones conform to machine tables for machine tools acc. to DIN 55201 and JIS 6337-1980. Please order locating pins for positioning subplates on machine tables acc. to DIN 55201 separately. Please order protection plugs to plug unused grid holes separately. Ring bolts for hoisting are supplied. Other dimensions available on request. Drawing reference: 1) grid hole 2) hole for DIN 912 cap screw (D3/D4)
Request for a quoteNORELEM FRANCE
France
Round baseplates with T-slots are used for constructing modular fixtures. These baseplates are positioned and mounted directly on machine tables. The precise longitudinal and transverse slot spacing ensures very high repeat clamping accuracy. The aligning holes are used to align the baseplate on the machine table. Please order locating pins to locate the baseplates separately. Ring bolts with T-nuts for hoisting are supplied. Other dimensions available on request. On request: other dimensions. Drawing reference: 1) hole for DIN 912 cap screw (D4)
Request for a quoteNORELEM FRANCE
France
Grid spacing 50 ±0.02 mm. Tombstones with grid holes are used on horizontal machining centres. The alphanumerically labelled grid holes guarantee a defined assignment of clamping elements by repeat setups. The tombstones conform to machine tables for machine tools acc. to DIN 55201 and JIS 6337-1980. Please order locating pins for positioning subplates on machine tables acc. to DIN 55201 separately. Please order protection plugs to plug unused grid holes separately. Ring bolts for hoisting are supplied. Other dimensions available on request. Drawing reference: 1) grid hole 2) hole for DIN 912 cap screw (D3/D4)
Request for a quoteNORELEM FRANCE
France
GJL 250 annealed or EN AW-7075. Drawing reference: machined faces: ±0.25 mm length tolerance: ≤200 mm: +3/+10 >200 mm ≤590 mm: +8/+15 ≥600 mm: +20/+50
Request for a quoteNORELEM FRANCE
France
Steel C45. Grey cast iron GG22 from 38 teeth. Sprockets with hub one side for DIN ISO 606 roller chains. The sprockets have a centre bore or are predrilled (this can vary due to production methods). For this reason, the dimension D3 max. given in the table is the maximum diameter of the bore that the sprockets are supplied with. This pilot hole/centre bore can be customised with a reamed hole, reamed hole with keyway or a tapped hole by the customer. Alternatively, bushes can be fitted by the customer to reduce the diameter.
Request for a quoteDIERMEIER ENERGIE GMBH
Germany
Description Castrol Radicool SF is a silicate-free long-life coolant concentrate (OAT technology). Castrol Radicool SF offers excellent corrosion protection. It can be used in gasoline and diesel engines (also aluminum and gray cast iron) . Castrol Radicool SF has the optimal effect in a mixing ratio of 1:1 with water. This results in frost protection down to -37°C and the best corrosion protection. Do not use Castrol Radicool SF undiluted Application Frost protection/ Proportion of Castrol Radicool SF dissolved in water: -20°C/ 35% -25°C/ 40% -30°C/ 45% -37°C/ 50% Advantages The special OAT Technology ensures long coolant change intervals. Castrol Radicool SF protects against corrosion, deposits in the cooling system and overheating. Castrol Radicool SF offers: -Protection against hard water -Effective cooling effect -Excellent corrosion protection -Very good elastomer compatibility -Protection against cavitation -Contains Bitrex - to protect against ingestion
Request for a quoteDIERMEIER ENERGIE GMBH
Germany
Description Castrol Radicool SF is a silicate-free long-life coolant concentrate (OAT technology). Castrol Radicool SF offers excellent corrosion protection. It can be used in gasoline and diesel engines (also aluminum and gray cast iron) . Castrol Radicool SF has the optimal effect in a mixing ratio of 1:1 with water. This results in frost protection down to -37°C and the best corrosion protection. Do not use Castrol Radicool SF undiluted Application Frost protection/ Proportion of Castrol Radicool SF dissolved in water: -20°C/ 35% -25°C/ 40% -30°C/ 45% -37°C/ 50% Advantages The special OAT Technology ensures long coolant change intervals. Castrol Radicool SF protects against corrosion, deposits in the cooling system and overheating. Castrol Radicool SF offers: -Protection against hard water -Effective cooling effect -Excellent corrosion protection -Very good elastomer compatibility -Protection against cavitation -Contains Bitrex - to protect against ingestion
Request for a quoteDIERMEIER ENERGIE GMBH
Germany
Description Castrol Radicool SF is a silicate-free long-life coolant concentrate (OAT technology). Castrol Radicool SF offers excellent corrosion protection. It can be used in gasoline and diesel engines (also aluminum and gray cast iron) . Castrol Radicool SF has the optimal effect in a mixing ratio of 1:1 with water. This results in frost protection down to -37°C and the best corrosion protection. Do not use Castrol Radicool SF undiluted Application Frost protection/ Proportion of Castrol Radicool SF dissolved in water: -20°C/ 35% -25°C/ 40% -30°C/ 45% -37°C/ 50% Advantages The special OAT Technology ensures long coolant change intervals. Castrol Radicool SF protects against corrosion, deposits in the cooling system and overheating. Castrol Radicool SF offers: -Protection against hard water -Effective cooling effect -Excellent corrosion protection -Very good elastomer compatibility -Protection against cavitation -Contains Bitrex - to protect against ingestion
Request for a quoteNORELEM FRANCE
France
Housing, grey cast iron. Bearing, ballbearing steel 100Cr6. Seal, rubber NBR. Pillow block bearings consist of a sealed singlerow ball bearing with a spherical outer ring which is mounted in a housing. Because of the spherical outer surface of the bearing, shaft misalignment can be compensated for. The bearings are manufactured with a plus tolerance. This results in transition or press fits when using shafts with htolerances. The shaft is secured by grub screws on the inner ring. In normal applications, pillow block bearings are maintenancefree due to the lifetime lubrication. In difficult environmental conditions relubrication can be carried out over the grease nipple. All housing dimensions are nominal dimensions for which the usual casting tolerances must be taken into consideration.
Request for a quoteMAGAGER, UNIPESSOAL, LDA
Portugal
PRO-ENTRY BENCH LATHE 10507771 This LATHE features a sturdy, rigid design and is manufactured from a combination of high quality gray grained iron and hardened steel. The IRWIN Bench Vice also features a cast steel handle that folds away before the vise can be overloaded and a two-start rolled acme screw that can fully open the jaws in minimal winding. It is an ideal tool for any professional or DIY enthusiast who requires a compact, multi-functional vise with superior clamping force, safe use and robust construction. Features and benefits: Body and sliding jaw are cast from close-grit gray iron, which is machined onto all friction surfaces for smooth, reliable action. Main screw made of high quality hardened steel Anvil included on the back of the body Safety stop system prevents the blade from being separated from the body Hardened steel jaws extend jaw life and are replaceable SG shatterproof iron nut can be replaced when damaged
Request for a quoteSTALEVAR COMPANY LLC
United Kingdom
Pig iron is one of the most liquid alloys due to its technical qualities and optimal price. Improvement of production and technological processes, updating of equipment and the qualifications of our specialists allow us to offer our customers high quality casting and service. Casting of cast iron by the method of casting in sandy clay molds The size of the castings 460 mm x 360 mm; Casting height up to 400 mm; Casting weight from 0.2 kg to 20 kg; The productivity of each line is 120 molds per hour. Casting of cast iron by the method of casting in sandy clay molds The size of the castings 1550 mm x 1200 mm; Casting height up to 600 mm; Casting weight from 50 kg to 2500 kg; Productivity 6 10 molds per hour. cast iron of the following grades gray cast irons SCh 15, SCh 20, etc.; high strength cast irons VCh 450 10, VCh 400 15, VCh 420 12, VCh 507, VCh 603, etc.; low alloyed silicon heat resistant and wear resistant cast irons ChKh, IChKh, ChS, ZhChS
Request for a quoteWATERGATES GMBH & CO. KG
Germany
Technical data Design Center body consists of 2 parts to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquids, drain water, sludge, food etc. (viscous media, pulverised media with fibre particles, plastic granulates, sand or similar media on request). Not suitable for steam. Body GG-25 (grey cast iron), epoxy coated (heattreatment 190°C, 20min) Sealing • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4301 (AISI 304) Stem Stainless steel 1.4305 (AISI 304) Function Electrical operated Pressure discharge bidirectional Stem Not rising Pressure range Please refer to the data sheet Temperature range • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid
Request for a quoteWATERGATES GMBH & CO. KG
Germany
Technical data Design Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquid and pulverised media with fibre particles, viscous media, drain water, sludge, food etc. (plastic granulates, sand or similar media on request). Not suitable for steam. Body GG-25 (grey cast iron), epoxy-coated (heattreatment 190°C, 20min) Sealing • Metal/metal • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4301 (304) Stem Stainless steel 1.4305 (304) Function Electric acting Pressure discharge One-sided Voltage 400V 3AC (24V DC, 230V AC on request) Pressure range Please refer to the table Temperature range • metal: on request • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid
Request for a quoteWATERGATES GMBH & CO. KG
Germany
Technical data Design Center body consists of 2 parts to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquids, drain water, sludge, food etc. (viscous media, pulverised media with fibre particles, plastic granulates, sand or similar media on request). Not suitable for steam. Refer to the advices on page 9 and 11! Body GG-25 (grey cast iron), epoxy coated 120 … 180µm (heattreatment 190°C, 20min) Sealing • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4301 (AISI 304) Stem Stainless steel 1.4305 (AISI 304) Function Pneumatic single acting with spring return, normally closed (NC). Pressure discharge bidirectional Pilot pressure 6bar Pilot Media Filtered and dried, slightly oiled air according to ISO 8573 (please refer to the data sheet) Pressure range Please refer to the table Temperature range • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid
Request for a quoteWATERGATES GMBH & CO. KG
Germany
Technical data Design Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquid and pulverised media with fibre particles, viscous media, drain water, sludge, food etc. (plastic granulates, sand or similar media on request). Not suitable for steam. Refer to the advices on page 8! Body GG-25 (grey cast iron), epoxy coated (heattreatment 190°C, 20min) Sealing • Metal/metal • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4301 (304) Stem Stainless steel 1.4305 (304) Function Pneumatic single acting with spring return, normally closed (NC). Pressure discharge One-sided Pilot pressure 6bar Pilot Media Filtered and dried, slightly oiled air according to ISO 8573 (please refer to the data sheet) Pressure range Please refer to the data sheet Temperature range • metal: on request • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 Installation Only with vertical upwards actuator The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
WATERGATES GMBH & CO. KG
Germany
Technical data Design Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquid and pulverised media with fibre particles, viscous media, drain water, sludge, food etc. (plastic granulates, sand or similar media on request). Not suitable for steam. Body GG-25 (grey cast iron), epoxy coated (heattreatment 190°C, 20min) Sealing • Metal/metal • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4301 (304) Stem Stainless steel 1.4305 (304) Function Pneumatic double acting Pressure discharge One-sided Pilot pressure 6bar (lower pressure on request) Pilot Media Filtered and dried, slightly oiled air according to ISO 8573 (please refer to the data sheet) Pressure range Please refer to the data sheet Temperature range • metal: on request • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid
Request for a quoteWATERGATES GMBH & CO. KG
Germany
Technical data Design Center body consists of 2 parts to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquids, drain water, sludge, food etc. (viscous media, pulverised media with fibre particles, plastic granulates, sand or similar media on request). Not suitable for steam. Body GG-25 (grey cast iron), epoxy coated (heattreatment 190°C, 20min) Sealing • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4301 (AISI 304) Stem Stainless steel 1.4305 (AISI 304) Lever Steel, lacquered Pressure discharge bidirectional Pressure range Please refer to the table Temperature range • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid
Request for a quoteWATERGATES GMBH & CO. KG
Germany
Technical data Design Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquid and pulverised media with fibre particles, viscous media, drain water, sludge, food etc. (plastic granulates, sand or similar media on request). Not suitable for steam. Body GG-25 (grey cast iron), epoxy coated (heattreatment 190°C, 20min) Sealing • Metal/metal • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4301 (304) Stem Stainless steel 1.4305 (304) Lever Steel, lacquered Pressure discharge One-sided Stem Not rising Pressure range Please refer to the data sheet Temperature range • metal: on request • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid
Request for a quoteWATERGATES GMBH & CO. KG
Germany
Technical data Design Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquid and pulverised media with fibre particles, viscous media, drain water, sludge, food etc. (plastic granulates, sand or similar media on request). Not suitable for steam. Body GG-25 (grey cast iron), epoxy coated (heattreatment 190°C, 20min) Sealing • Metal/metal • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4301 (304) Stem Stainless steel 1.4305 (304) Hand wheel Steel, lacquered Pressure discharge One-sided, two-sided on request Stem Not rising Pressure range Please refer to the data sheet Temperature range • metal: on request • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid
Request for a quoteWATERGATES GMBH & CO. KG
Germany
Technical data Design Center body consists of 2 parts to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquids, drain water, sludge, food etc. (viscous media, pulverised media with fibre particles, plastic granulates, sand or similar media on request). Not suitable for steam. Body GG-25 (grey cast iron), epoxy coated (heattreatment 190°C, 20min) Sealing • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4301 (AISI 304) Stem Stainless steel 1.4305 (AISI 304) Hand wheel Steel, lacquered Pressure discharge bidirectional Stem Not rising Pressure range Please refer to the data sheet Temperature range • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid
Request for a quoteResults for
Gray iron - Import exportNumber of results
23 ProductsCountries
Company type