Gears for transmissions - Import export

Castrol Syntrans Transaxle 75W-90 is a modern, fully synthetic, high-performance manual transmission lubricant. Application Excellent for manual transmissions and transaxle systems (manual transmission and final drive in one housing) of cars, vans and vans. Thanks to its high thermal stability and the multi-range characteristics SAE 75W-90, Castrol Syntrans Transaxle 75W-90 also covers the viscosity classes SAE 80, SAE 90 and SAE 80W-90. Advantages excellent wear protection and shiftability for ptimal use in transaxle transmissions minimized switching forces under all climatic conditions no shift scraping after cold starts and shaking during gear changes dampening of transmission noise fuel savings through improved transmission efficiency reduced temperature level and transmission cleanliness with

Housing polyamide 6. Hollow shaft steel. Screen plastic. Grub screw steel. Version Impactresistant housing. Hollow shaft black oxidised. Grub screw black. Dial black, digits white. Note Position indicators allow direct reading of input measurement values at a glance. In addition, the value indicated per spindle rotation (corresponding spindle pitch) can be selected and the various indicator values are realised by a transmission gear. The position indicators are distinguished by their small construction with very clear display. They are especially suitable for small spindle distances and small shaft diameters and have a torque support that is positioned in a hole on the side. ** At the 1st asterisk give assembly position and at the 2nd asterisk give the count direction (see sample order “assembly position, count direction”). Technical data – Counter consisting of 3 10position dials – Height of figures about 4 mm – Hollow shaft Ø 10 H7 mm

Gebuwin has two ranges of electrical winches. The EW range is constructed with a worm gear box as centre point between the electro- motor and the cable drum, whereas the EP range is always equipped with a planetary gear box as transmission. The winches are compact and have a robust construction. The EW range is available as 230V and 400V. The EP range is available only as 400V. All of the winches are equipped with maintenance free bearings. The winches are normally delivered as pulling winches but upon request, they can be delivered as hoisting winches. Most parts are made from steel and have been either painted or zinc plated. The coding is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment and the type of winch. The explanation for the coding is as follows: Type coding: EW = electrical winches with worm gear box EP = electrical winches with...

Gebuwin has two ranges of electrical winches. The EW range is constructed with a worm gear box as centre point between the electro- motor and the cable drum, whereas the EP range is always equipped with a planetary gear box as transmission. The winches are compact and have a robust construction. The EW range is available as 230V and 400V. The EP range is available only as 400V. All of the winches are equipped with maintenance free bearings. The winches are normally delivered as pulling winches but upon request, they can be delivered as hoisting winches. Most parts are made from steel and have been either painted or zinc plated. The coding is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment and the type of winch. The explanation for the coding is as follows: Type coding: EW = electrical winches with worm gear box EP = electrical winches with...

Gebuwin has two ranges of electrical winches. The EW range is constructed with a worm gear box as centre point between the electro- motor and the cable drum, whereas the EP range is always equipped with a planetary gear box as transmission. The winches are compact and have a robust construction. The EW range is available as 230V and 400V. The EP range is available only as 400V. All of the winches are equipped with maintenance free bearings. The winches are normally delivered as pulling winches but upon request, they can be delivered as hoisting winches. Most parts are made from steel and have been either painted or zinc plated. The coding is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment and the type of winch. The explanation for the coding is as follows: Type coding: EW = electrical winches with worm gear box EP = electrical winches with...

Gebuwin has two ranges of electrical winches. The EW range is constructed with a worm gear box as centre point between the electro- motor and the cable drum, whereas the EP range is always equipped with a planetary gear box as transmission. The winches are compact and have a robust construction. The EW range is available as 230V and 400V. The EP range is available only as 400V. All of the winches are equipped with maintenance free bearings. The winches are normally delivered as pulling winches but upon request, they can be delivered as hoisting winches. Most parts are made from steel and have been either painted or zinc plated. The coding is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment and the type of winch. The explanation for the coding is as follows: Type coding: EW = electrical winches with worm gear box EP = electrical winches with...

Gebuwin has two ranges of electrical winches. The EW range is constructed with a worm gear box as centre point between the electro- motor and the cable drum, whereas the EP range is always equipped with a planetary gear box as transmission. The winches are compact and have a robust construction. The EW range is available as 230V and 400V. The EP range is available only as 400V. All of the winches are equipped with maintenance free bearings. The winches are normally delivered as pulling winches but upon request, they can be delivered as hoisting winches. Most parts are made from steel and have been either painted or zinc plated. The coding is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment and the type of winch. The explanation for the coding is as follows: Type coding: EW = electrical winches with worm gear box EP = electrical winches with...

Gebuwin has two ranges of electrical winches. The EW range is constructed with a worm gear box as centre point between the electro- motor and the cable drum, whereas the EP range is always equipped with a planetary gear box as transmission. The winches are compact and have a robust construction. The EW range is available as 230V and 400V. The EP range is available only as 400V. All of the winches are equipped with maintenance free bearings. The winches are normally delivered as pulling winches but upon request, they can be delivered as hoisting winches. Most parts are made from steel and have been either painted or zinc plated. The coding is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment and the type of winch. The explanation for the coding is as follows: Type coding: EW = electrical winches with worm gear box EP = electrical winches with...

The EP range is always equipped with a planetary gear box as transmission. The winches are compact and have a robust construction. he EP range is available only as 400V. All of the winches are equipped with maintenance free bearings. The winches are normally delivered as pulling winches but upon request, they can be delivered as hoisting winches. Most parts are made from steel and have been either painted or zinc plated. These winches have a high performance efficiency and are low in maintenance. When compared with the EW range, these winches have a larger cable storage and their welded steel frame provides a more stable construction. Also there are more additional options. The winches comply with protection classification IP55 and insulation classification F. As standard they are equipped with 2 speeds, as well as an optional 3 speed choice for every type. The connection duration is S3 - 25% up to S3 - 40%.

The Gebuwin battery drill powered worm gear winch has a robust build. This winch provides an effective solution for locations without electricity, as well in situations where hoisting of a load is needed for a limited distance. The winch has a flexible coupling for connecting a battery drilling machine or an electric drilling machine. The hoisting capacity of the winch is 200kg which is calculated according to the first cable layer on the cable drum. The closed worm gear box has a transmission with a self braking capacity. This self braking capacity ensures a hold of the load at any required height during hoisting and lowering. All rotating parts run in maintenance free bearings. The winch can be wall mounted or console mounted; it is available in grey/black paint.

Gebuwin has two ranges of electrical winches. The EW range is constructed with a worm gear box as centre point between the electro- motor and the cable drum, whereas the EP range is always equipped with a planetary gear box as transmission. The winches are compact and have a robust construction. The EW range is available as 230V and 400V. The EP range is available only as 400V. All of the winches are equipped with maintenance free bearings. The winches are normally delivered as pulling winches but upon request, they can be delivered as hoisting winches. Most parts are made from steel and have been either painted or zinc plated. The coding is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment and the type of winch. The explanation for the coding is as follows: Type coding: EW = electrical winches with worm gear box EP = electrical winches with...

Gebuwin has two ranges of electrical winches. The EW range is constructed with a worm gear box as centre point between the electro- motor and the cable drum, whereas the EP range is always equipped with a planetary gear box as transmission. The winches are compact and have a robust construction. The EW range is available as 230V and 400V. The EP range is available only as 400V. All of the winches are equipped with maintenance free bearings. The winches are normally delivered as pulling winches but upon request, they can be delivered as hoisting winches. Most parts are made from steel and have been either painted or zinc plated. The coding is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment and the type of winch. The explanation for the coding is as follows: Type coding: EW = electrical winches with worm gear box EP = electrical winches with...

Gebuwin has two ranges of electrical winches. The EW range is constructed with a worm gear box as centre point between the electro- motor and the cable drum, whereas the EP range is always equipped with a planetary gear box as transmission. The winches are compact and have a robust construction. The EW range is available as 230V and 400V. The EP range is available only as 400V. All of the winches are equipped with maintenance free bearings. The winches are normally delivered as pulling winches but upon request, they can be delivered as hoisting winches. Most parts are made from steel and have been either painted or zinc plated. The coding is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment and the type of winch. The explanation for the coding is as follows: Type coding: EW = electrical winches with worm gear box EP = electrical winches with...

Gebuwin has two ranges of electrical winches. The EW range is constructed with a worm gear box as centre point between the electro- motor and the cable drum, whereas the EP range is always equipped with a planetary gear box as transmission. The winches are compact and have a robust construction. The EW range is available as 230V and 400V. The EP range is available only as 400V. All of the winches are equipped with maintenance free bearings. The winches are normally delivered as pulling winches but upon request, they can be delivered as hoisting winches. Most parts are made from steel and have been either painted or zinc plated. The coding is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment and the type of winch. The explanation for the coding is as follows: Type coding: EW = electrical winches with worm gear box EP = electrical winches with...

High strength and high-alloy structural maraging steel scrap. It is used in production of high pressure equipment, in manufacture of rocket motor casings, heavy-loaded critical parts, aircraft, shafts, casings and other parts, fasteners, gear transmissions of engines for artillery, machine guns and submarines, etc. Chemical composition: Ni 17,7% — 19,00% Cr < 0,1% Cо < 8,5% — 9,5% Mo <4.6% - 5.5% Fe - balance

145 CV Transmission :6 gears 40 Km/h 3.1 T / 5.2 M MANITOU Attachment SRS , arm suspension Hydr additionnal function Air seat Air conditionning 500/70R24 Michelin

145 HP Engine Transmission: 6 gears / 40 Km/h 3 ° hydr function SRS , smooth ride function Hydr Qfit attachment Rear hydr traler brake Working lights: 4 front + 4 rear + 2 arm Air seat Air conditionning Undercarriage protection Tyres : 500/70R24