Forming - Import export

Distributors are components for separating or joining together liquids or gases. We offer various distributors, distributor strips, distributor pieces with several outputs and distributor sockets.

Forms the component wire in C-shape and cuts the residual part at 4mm. ESD. Steel thickness 3mm, Length 150mm

Large Quantities: produced as cold formed parts (so-called multi-station presses), which require high output volumes in order to achieve a reasonable price parts Small Quantities: Produced as turned parts - the economic adjustment to small batch sizes Fields of application: For thermoplastics, duroplastics, light alloys, metal compounds. Industrial consumers: Electrical industry, plastics processing industry, sheet metal processing industry, telecommunications, tank- and container construction.

Depending on the material high-pressure-forming can be an advantageous method, where the soft pressed plate is blown into shape with compressed air. This special procedure is being applied by KIRSCH Kunststofftechnik for decades and requires a high degree of cleanness and precision.

BIEGLO offers finished or semi-finished parts directly formed from polyimide powder with all the attributes of sintered PI. The advantage of direct formed parts are the lower costs as quantitiy is increasing. Due to almost zero percent waste during production it can be a more economic production method. Machined parts are widely used for small series high precision applications. Polyimide direct formed parts can be used in different applications: Automotive industry: racing engine fuel line. Jet engine: vane bushing or lock nut insert. Industrial machinery: hotrunner systems nozzles or plasma cutting torch as gas distributers or sealing components. Semicon HDPCVD Equipment: e.g. heater coil spacer. Life sciences: rotor seal or pneumatic surgical tool vane.

Compact short-stroke cylinder with a diameter of 20 in a rectangular block shape with mounting holes on the front.

CNC sheet metal processing, CNC laser parts, stamped parts, fine stamped parts, bent parts, pipe processing, cold forming, heat shielding sheets, deep-drawn parts, sheet metal parts from progressive dies, sheet metal parts assembled, sheet metal parts with surface treatment, sheet metal parts in large series, one-off production, prototypes.

The AT multi-turn actuators are characterized by their compact shape and clear design. Integrated grooves for sensor mounting. Angle of rotation from 0° to 180°.

EN 10149-2 Thermomechanically Rolled Steels : S315MC, S460 MC, S 500MC, S 700MC EN 10149-3 Normalized or Normalizing Rolled Steels : S260NC – S 420 NC

Diamond profile rollers Individually manufactured Highest precision Hand-set sintered diamond profile wheels Mechanically set sintered diamond profile rolls Reverse electrolytically coated diamond profile rolls

We can supply you with standard round blanks from stock at a favourable price and at short notice. Carbide grade V20 HIP. Other dimensions and carbide grades (SM20 HIP, SM30 HIP, V40 HIP) on request.

Carbide gravers made in Switzerland

for rectangular bars and square bars made of hard metal in the grades SM20 HIP and SM30 HIP, raw sintered, from Swiss production. Other dimensions and carbide grades on request.

for rectangular bars and square bars made of hard metal in the grades SM20 HIP and SM30 HIP, raw sintered, from Swiss production. Other dimensions and carbide grades on request.

The economic adjustment to small batch sizes, we meet with our turned parts for the direct assembly in plastics and die-cast products. Any thread forms such as, thread-tapping (DIN7500), thread cutting (DIN 7513-7516) or KTG for direct screw in plastics are realized cost-effectively. Advantage is the elimination of high tooling costs, since no counter-thread in the workpiece (eg threaded inserts, nuts, etc.) is required because the direct assembly takes place directly into the workpiece. Only a given tube is required in order to screw it directly. Our turned parts replace previously cold formed parts used (so-called multi-station presses) which require high output volumes in order to achieve a reasonable price parts.

Forms the component wire in C-shape and cuts the residual part at 4mm. ESD. Steel thickness 3mm, Length 150mm

Coupling stainless steel 1.4057. Screws stainless steel 1.4301. For applications that require a small construction volume and low surface pressure. The keyless locking coupling can be fully recessed in a hub connection. for shaft diameters 6 20 mm suitable for hubs with low wall thickness minimum axial offset possible selfcentring Assembly Lightly oil keyless locking coupling on the tapered faces and contact points of the shaft and hub. Do not use MoS2 or grease. Insert keyless locking coupling in the hub seat and slide onto shaft. Tighten screws crosswise in several increments to the defined tightening torque. Dismantling Remove all screws and screw into the extraction threads of the front flange. Tighten screws crosswise in several steps until the keyless locking coupling loosens. Tolerances Shaft Recommended tolerance h8. Surface quality Rz ≤ 16 µm. Hub Recommended tolerance H8. Surface quality Rz ≤ 16 µm.

Particularly compact selfcentring keyless locking coupling without axial offset. for shaft diameters from 8 to 85 mm for medium torques suitable for hubs with low wall thickness no axial offset selfcentring Assembly Lightly oil keyless locking coupling on the tapered faces and contact points of the shaft and hub. Do not use MoS2 or grease. Insert keyless locking coupling in the hub seat and slide onto shaft. Tighten screws crosswise in several increments to the defined tightening torque. Dismantling Remove all screws and screw into the extraction threads of the front flange. Tighten screws crosswise in several steps until the keyless locking coupling loosens. Tolerances Shaft Recommended tolerance h8. Surface quality Rz ≤ 16 µm. Hub Recommended tolerance H8. Surface quality Rz ≤ 16 µm.

Shrink disc to connect a hollow hub to a shaft. They are mounted on the OD of the hub and generate pressure on the hub wall by reducing the ID with wedgeformed rings, creating a press fit between the hub and shaft. They are suitable for static, dynamic and shock loads. for extremely high torques no axial shaft/hub offset when assembling selfcentring The version 23380014072 has high tensile ISO 4762 screws. Assembly Remove existing transportation locks. Clean and lightly oil shaft, internal and external hub diameters. Do not use MoS2 or grease. Slide shrink disc onto hub. Then slide unit (shrink disc/hub) onto shaft and position correctly. Gently tighten clamping screws one after the other by hand. Then use a torque wrench to tighten the clamping screws crosswise in several increments to the defined tightening torque MS. 1st increment approx. 33% MS 2nd increment approx. 66% MS

Unshielded system. The magnets can be mounted by pressfit or gluing. 1) magnetic face

ALFAMAK is one of Turkey's leading gas spring manufacturers. Established in 2003, our company has been operating in the industry for 19 years and has gained a reputation for success. Gas spring is a new technology which comes instead of standard steel or polyurethane springs. A gas spring has a container of compressed Nitrogen gas with Piston Rod , Bush, Rod Rings, Valve etc. The Gas Springs are used in Cold Stamping industry to form, cut and fix the sheet metal inside the die. Many auxiliary materials are used for different purposes in the gas spring. Rod wiper, rod guide and rod seal are used on the inner surface of the bush. The purpose of the rod wiper is to prevent the oil and chips in the die from entering the gas spring. The rod guide is used to carry the load in case of axial force on the rod during use. The most important auxiliary material for sealing is rod/piston seal. It directly affects the performance of the product by keeping the gas in the gas spring.

Ball end locating pins are specially designed to ease the locating process. The tendency to jam, caused by the locating hole not being at right angles to the pin or by the pushing force not being parallel to the pin axis, is minimized by the ball-end form (see illustration).

Hardened and ground (HRC 56 +2). Note: The locating pins can be easily removed with an extractor.

The rest pads can be used both as a stable and precise support and as a stop. The pin form of the rest pad also allows it to be used with components with constricted support points.

CAS-Nr.: [497-76-7] Storing temperature: 10-25°C EINECS: 207-850-3 Shipping condition: ambient Appearance: white powder MW: 272.25g/mol Formula: C12H16O7

Application: Protein Technologies : Inorganics CAS-Nr.: [7783-20-2] Storing temperature: 10-25°C GHS pictogram: GHS09 EINECS: 231-984-1 Assay: >99.5% Shipping condition: ambient IUPAC: Ammonium tetraoxosulfate Appearance: white crystals MW: 132.14 g/mol UNSPSC-No: 12352314 Formula: (NH4)2*SO4

Form tea with apricot, 12 packs per pallet.

Mixed form tea, 12 packs per pallet.