Ferrous metal - Import export

Pig iron is one of the most liquid alloys due to its technical qualities and optimal price. Improvement of production and technological processes, updating of equipment and the qualifications of our specialists allow us to offer our customers high quality casting and service. Casting of cast iron by the method of casting in sandy clay molds The size of the castings 460 mm x 360 mm; Casting height up to 400 mm; Casting weight from 0.2 kg to 20 kg; The productivity of each line is 120 molds per hour. Casting of cast iron by the method of casting in sandy clay molds The size of the castings 1550 mm x 1200 mm; Casting height up to 600 mm; Casting weight from 50 kg to 2500 kg; Productivity 6 10 molds per hour. cast iron of the following grades gray cast irons SCh 15, SCh 20, etc.; high strength cast irons VCh 450 10, VCh 400 15, VCh 420 12, VCh 507, VCh 603, etc.; low alloyed silicon heat resistant and wear resistant cast irons ChKh, IChKh, ChS, ZhChS

Brass of two or more elements of the periodic table. Often it is copper, zinc and alloying link that impart positive attributes. Nowadays, many brass products are easily replaced by copper ones. In Ukraine, there are often two types of brass rolled metal products. Simple alloys of brass contain two components (copper and zinc) in the name there is a single letter and a two digit number of copper. A bright representative of this range is L63. Brass which contains 63% copper and 37% zinc. Special brass contains more than two elements. The name contains more designating signs due to additional alloying components of the periodic table. A bright representative on the market of brass ЛС59 1, one more percent of lead is concentrated there. From the above, the brightest representatives of brass on the Ukrainian market are L63 and LS59 You can contact us by mail - marketing@stalevar.com or by phone +380675624220.

We are the best source for ferrous scrap metal and non-ferrous scrap metals. With five recycling locations scattered around EU, and an active demolition and dismantling service we have a huge supply of scrap metal. In addition, we buy scrap metal from national and international customers and resell it to people just like you at affordable prices. As one of the largest scrap metal dealers in the EU, our business, for the past 40 years, has always focused on quality. So while we have a huge supply of scrap metal it is all graded and sorted according to the standards of the metal industry. What that means for you is that when you buy scrap metal you are not just buying a ton of copper, but a ton of copper that is sorted, process and rated according to the standards set forth by the metal industry. We accept a wide variety of ferrous and non-ferrous scrap and surplus metal products.

We are the best source for ferrous scrap metal and non-ferrous scrap metals. With five recycling locations scattered around EU, and an active demolition and dismantling service we have a huge supply of scrap metal. In addition, we buy scrap metal from national and international customers and resell it to people just like you at affordable prices. As one of the largest scrap metal dealers in the EU, our business, for the past 40 years, has always focused on quality. So while we have a huge supply of scrap metal it is all graded and sorted according to the standards of the metal industry. What that means for you is that when you buy scrap metal you are not just buying a ton of copper, but a ton of copper that is sorted, process and rated according to the standards set forth by the metal industry. We accept a wide variety of ferrous and non-ferrous scrap and surplus metal products.

We are the best source for ferrous scrap metal and non-ferrous scrap metals. With five recycling locations scattered around EU, and an active demolition and dismantling service we have a huge supply of scrap metal. In addition, we buy scrap metal from national and international customers and resell it to people just like you at affordable prices. As one of the largest scrap metal dealers in the EU, our business, for the past 40 years, has always focused on quality. So while we have a huge supply of scrap metal it is all graded and sorted according to the standards of the metal industry. What that means for you is that when you buy scrap metal you are not just buying a ton of copper, but a ton of copper that is sorted, process and rated according to the standards set forth by the metal industry. We accept a wide variety of ferrous and non-ferrous scrap and surplus metal products.

We are the best source for ferrous scrap metal and non-ferrous scrap metals. With five recycling locations scattered around EU, and an active demolition and dismantling service we have a huge supply of scrap metal. In addition, we buy scrap metal from national and international customers and resell it to people just like you at affordable prices. As one of the largest scrap metal dealers in the EU, our business, for the past 40 years, has always focused on quality. So while we have a huge supply of scrap metal it is all graded and sorted according to the standards of the metal industry. What that means for you is that when you buy scrap metal you are not just buying a ton of copper, but a ton of copper that is sorted, process and rated according to the standards set forth by the metal industry. We accept a wide variety of ferrous and non-ferrous scrap and surplus metal products.

We are the best source for ferrous scrap metal and non-ferrous scrap metals. With five recycling locations scattered around EU, and an active demolition and dismantling service we have a huge supply of scrap metal. In addition, we buy scrap metal from national and international customers and resell it to people just like you at affordable prices. As one of the largest scrap metal dealers in the EU, our business, for the past 40 years, has always focused on quality. So while we have a huge supply of scrap metal it is all graded and sorted according to the standards of the metal industry. What that means for you is that when you buy scrap metal you are not just buying a ton of copper, but a ton of copper that is sorted, process and rated according to the standards set forth by the metal industry. We accept a wide variety of ferrous and non-ferrous scrap and surplus metal products.

We are the best source for ferrous scrap metal and non-ferrous scrap metals. With five recycling locations scattered around EU, and an active demolition and dismantling service we have a huge supply of scrap metal. In addition, we buy scrap metal from national and international customers and resell it to people just like you at affordable prices. As one of the largest scrap metal dealers in the EU, our business, for the past 40 years, has always focused on quality. So while we have a huge supply of scrap metal it is all graded and sorted according to the standards of the metal industry. What that means for you is that when you buy scrap metal you are not just buying a ton of copper, but a ton of copper that is sorted, process and rated according to the standards set forth by the metal industry. We accept a wide variety of ferrous and non-ferrous scrap and surplus metal products.

We are the best source for ferrous scrap metal and non-ferrous scrap metals. With five recycling locations scattered around EU, and an active demolition and dismantling service we have a huge supply of scrap metal. In addition, we buy scrap metal from national and international customers and resell it to people just like you at affordable prices. As one of the largest scrap metal dealers in the EU, our business, for the past 40 years, has always focused on quality. So while we have a huge supply of scrap metal it is all graded and sorted according to the standards of the metal industry. What that means for you is that when you buy scrap metal you are not just buying a ton of copper, but a ton of copper that is sorted, process and rated according to the standards set forth by the metal industry. We accept a wide variety of ferrous and non-ferrous scrap and surplus metal products.

We are the best source for ferrous scrap metal and non-ferrous scrap metals. With five recycling locations scattered around EU, and an active demolition and dismantling service we have a huge supply of scrap metal. In addition, we buy scrap metal from national and international customers and resell it to people just like you at affordable prices. As one of the largest scrap metal dealers in the EU, our business, for the past 40 years, has always focused on quality. So while we have a huge supply of scrap metal it is all graded and sorted according to the standards of the metal industry. What that means for you is that when you buy scrap metal you are not just buying a ton of copper, but a ton of copper that is sorted, process and rated according to the standards set forth by the metal industry. We accept a wide variety of ferrous and non-ferrous scrap and surplus metal products.

Concentrated, acid preparation for cleaning and disinfecting all kinds of surfaces - in the kitchen, gastronomy, food industry - resistant to acids. It is also perfect for sanitary facilities, locker rooms, showers and other rooms with high humidity. Recommended for disinfection of machines and devices made of stainless steel and non-ferrous metals in contact with food or animal feed. It does not contain toxic substances. Removes current impurities in the form of inorganic deposits of lime origin, rust infiltrations and stubborn dirt. Odorless. PZH certificate

Profile guide rails can be screwed on from above. The profile guide rails are available in four sizes and one or more carriages can be assembled on them. 4row versions with round arch profile. The tracks of the profile guide rails are set below an angle of 45° and thus can carry loads from all directions. The profile guide rails correspond to the market standard and can replace linear guides of the same design by other manufacturers. On request Lengths up to a max. 3960 mm.

Body carbon steel. Balls roller bearing steel. Diverters plastic. Standard guide carriage with recirculating ball guidance precision N not preloaded (Z0). With doublesided end seal. 4row versions with round arch profile. The profile guide rail tracks are arranged at 45° and can accept loads from all directions. High dynamic values v = 5 m/s. Applicable temperature in continuous use max. 80 °C. On request Various precision and preload classes. Drawing reference 1) ground ref. edge

Boride grinding and polishing stones for all shaping and fine work on tools and contours on steel and non-ferrous metals.

Light, spherical, mineral and ferrite-free glass beads blasting abrasive WIWOX® GP. Ideal for bright, matt-gloss surfaces. The area of application ranges from the cleaning of delicate tools to the deburring of precision parts through to the finishing of precious and non-ferrous metals.

As a competent industrial partner, we produce stamped, bent-wire and formed components from stainless steel, non-ferrous metals and regular steel in a consistent quality. Dependability and flexibility characterize our performance. Our experience and technical know-how enable fast response and economical pricing. Benefit from the experience our staff have gathered with these products. We can competently process small as well as large orders. Possible material thicknesses: 0.5 to 4.5 mm. Possible materials: Regular steel, stainless steel, brass, copper, light metals. Available with all standard surfaces.

One of our specialties are specialized products for the metalworking industry. In this area, we offer a large range of non-water-miscible and water-miscible products and emulsions that are suitable for processing aluminum, non-ferrous metals, steel and stainless steel. We also have a comprehensive range of customer-specific solutions for manufacturing processes such as forming, deep drawing, punching, fine blanking, machining, deep drilling, sawing and eroding. Thanks to our experienced team of advisors and advice at eye level, we can find the right product for every application.

Replacement product ARAL SAROL 474 EP Semi-synthetic water-miscible premium cooling lubricant Description Castrol Alusol™ ABF 10 is a boron, amine, formaldehyde releaser and chlorine-free, semi-synthetic water-miscible high-performance cooling lubricant. It contains a unique additive package that improves machine performance and surface quality, ensures excellent stability and bioresistance and reduces machining costs. Castrol Alusol ABF 10 is suitable for both central systems and individual systems. Application Castrol Alusol ABF 10 was specially developed for processing aluminum alloys. The product can also be used to process low-alloy steels and non-ferrous metals .

Water-miscible premium cooling lubricant Description Castrol Alusol ABF 47 is a boron, amine, formaldehyde releaser and chlorine-free water-miscible high-performance cooling lubricant. It contains a unique additive package that improves machine performance and surface quality, ensures excellent stability and reduces machining costs. Castrol Alusol ABF 47 is suitable for both central systems and individual systems. Application Castrol Alusol ABF 47 was specially developed for processing aluminum alloys. The product can also be used to process low-alloy steels and non-ferrous metals .

Water-miscible premium cooling lubricant Description Castrol Alusol ABF 47 is a boron, amine, formaldehyde releaser and chlorine-free water-miscible high-performance cooling lubricant. It contains a unique additive package that improves machine performance and surface quality, ensures excellent stability and reduces machining costs. Castrol Alusol ABF 47 is suitable for both central systems and individual systems. Application Castrol Alusol ABF 47 was specially developed for processing aluminum alloys. The product can also be used to process low-alloy steels and non-ferrous metals .

WIWOX® 340 is a weakly alkaline cleaning agent for grease, oil and oil carbon soiling. Very suitable for pre-cleaning or basic cleaning of soiled steel, cast iron and non-ferrous metal or plastic parts in an ultrasonic bath or in a spray cleaning system. After cleaning and without water rinsing, the parts are temporarily protected against corrosion. The final drying can be accelerated by blowing off with compressed air, a warm air flow or treatment in a drying cabinet. WIWOX® 340 can be used in a concentration of 5 – 7 %. Dilution with water depends on the degree of contamination and the intended exposure time. The bath should have a temperature of approx. 60° C. The bath should be kept at a constant temperature. In the field of precision mechanics, longer exposure times are possible depending on the degree of contamination.

TAGRED FLAP GRINDING DISC 125mm 22.23mm P40 Flap disc made of cloth flaps with corundum grain on a fiberglass disc, suitable for machining steel, aluminium, wood, non-ferrous metals and other materials. TAGRED discs are characterized by high precision and reliability. TECHNICAL DATA: Disc diameter: 125 mm Hole diameter: 22.23mm Gradation: 40 Maximum rotational speed: 12200 rpm Maximum linear speed: 80 m/s

TAGRED FLAP GRINDING DISC 125mm 22.23mm P36 Flap disc made of cloth flaps with corundum grain on a fiberglass disc, suitable for machining steel, aluminium, wood, non-ferrous metals and other materials. TAGRED discs are characterized by high precision and reliability. TECHNICAL DATA: Disc diameter: 125 mm Hole diameter: 22.23mm Gradation: 36 Maximum rotational speed: 12200 rpm Maximum linear speed: 80 m/s

Precision Machined Components manufactured by CNC turning Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

Steel Tube Fittings manufactured by CNC turning Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

hex pipe nipple material: carbon steel ASTM 1045 finish: zinc plated size: hex distance across flats 1.125 inch, length 1.96 inch thread: 3/4 NPTF, 14 threads per inch, 0.55 inch thread engagement manufacturing process: sawing, turning, threading, plating Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

Double sheet profiling machine. The machine makes 2 independent profiles tailored to the customer's requirements. For example, it can make a façade profile and a roof profile.

Contact us to get a quotation today!

Ornamental, structural, precision, process Carbon steel- stainless steels