Electric drives - Import export

- Low-maintenance system for travel up to 100 m - Other sizes and versions available, travel up to 200 m and more with E2 roller e-chains® - Protection against weather and dirt exposure - Cost-effective and fully enclosed complete solution - Standardized and modular design - Simple wall assembly or optional floor mounting - Cable lengths up to 50% shorter than festooning, low-profile installation and no cable junction - Cables are at all times guided with a defined bending radius, and tensile forces are absorbed by the e-chain® - Cables cannot hook, jam, or tear - No slip ring contacts (as is the case on motor drums) -Cables or hoses can easily be retrofitted at any time Reduce electricity costs - direct drive due to scraper, no additional drives needed (as is the case on motor drums) Scraper arm (e.g. as mechanical connection to the scraper carriage) optionally available - we document the situation on-site and will propose a customised solution

Bearing block and carriage aluminium alloy. Guide column and threaded spindle stainless steel. Plain bearing for guide columns and spindle nut highquality special plastic. Claw coupling aluminium with polyurethane coupling spider. Version Aluminium alloy anodised. Stainless steel hardened and ground. Threaded spindle with ball bearing. Note for ordering The unit is supplied with the position of cable outlet or control unit as shown in the drawing. Note Positioning stages for motorised adjustment and positioning tasks. The plain bearings and spindle nuts are suitable for dry running, however lubrication with a grease for plastic plain bearings is recommended. The suitable programming software and interface cable for the stepper motor with positioning control are available as accessories (2500015).

Base and rotary table aluminium alloy. Hollow shaft stainless steel. Preloaded worm gear steel. Claw coupling aluminium with polyurethane coupling spider. Version Aluminium alloy anodised. Note for ordering The unit is supplied with the position of cable outlet or control unit as shown in the drawing. Note Rotary positioning stages for motorised adjustment and positioning tasks. The preloaded worm gear runs virtually playfree. The bearing of the worm shaft offers maximum radial rotational accuracy. Cables can be routed through the large bore in the hollow shaft. The adjustable positioning ring is used to determine the rotational reference point to the position of the assembled part. Proximity switches can be mounted with the optionally available sensor holder (21094). The suitable programming software and interface cable for the stepper motor with positioning control are available as accessories (2500015).

age 1995 2 drilling heads sliding table electr. drive electr. foot switch underframe Ref: NA220154A Please ask for price. We ship and install worldwide!

width 60 cm age 1978 laminating machine electr. drive Ref: TR240096A Please ask for price. We ship and install worldwide!

age 1992 Book back nipping press electr. drive hydraulic pressing Ref: GA240098A Please ask for price. We ship and install worldwide!

age unknown wire stitching machine 1 sttiching head electr. drive incl. substructure Ref: GR230210A Please ask for price. We ship and install worldwide!

age 1985 7 drilling heads adjustable drilling head distance incl. substructure electr. drive electr. foot switch Delivery time: immediately from stock Ref: HA200365A Please ask for price. We ship and install worldwide!

age 1990 stapling machine 2 stitching heads electr. drive electr. foot switch incl. substructure Delivery time: immediately from stock Ref: NA230338A Please ask for price. We ship and install worldwide!

age 2018 film loaded for laminating rolls electr. drive mobile Delivery time: immediately from stock Ref: FO240156A Please ask for price. We ship and install worldwide!

age 1990 paper driller 2 drilling heads sliding table electr. drive incl. substructure Ref: NA230337A Please ask for price. We ship and install worldwide!

age 1965 wire stitching machine 1 sttiching head electr. drive incl. substructure Delivery time: immediately Ref: GR230359A Please ask for price. We ship and install worldwide!

age 1980 eyeletting machine electr. drive underframe Delivery time: immediatelly from stock Ref: HA230214A Please ask for price. We ship and install worldwide!

age 1960 eyeletting machine electr. drive food switch underframe Delivery time: immediately from stock Ref: HA220076A Please ask for price. We ship and install worldwide!

age 1995 4 drilling heads with automatic table move variable drill speed drill-underlay with cardboard electr. drive electr. foot switch incl. substructure Delivery time: immediatelly from stock Ref: HA230223A Please ask for price. We ship and install worldwide!

age 2000 table model 2 drilling heads electr. drive manual handle slide plate Delivery time: immediately from stock Ref: NA200211A Please ask for price. We ship and install worldwide!

width 68 cm age 1963 scoring and perforating machine electr. drive food switch incl. substructure Delivery time: immediatelly from stock Ref: BI230336A Please ask for price. We ship and install worldwide!

age 1960 wire stitching machine 1 sttiching head electr. drive food switch incl. substructure Delivery time: immediately from stock Ref: HO230121A Please ask for price. We ship and install worldwide!

age 2001 forklift high-lift truck electr. drive load capacity 1.000 kg 1.600 mm length of stroke Delivery time: shortly Ref: YA230070A Please ask for price. We ship and install worldwide!

age 1993 semi automatic hot stamping machine stamping area max. 125 x 280 mm electr. drive 1 foil feeder 1 heating plate automatic feeding unwinding system for round material / cans underframe Delivery time: immediately from stock Ref: GI200261A Please ask for price. We ship and install worldwide!

It relieves both human and the environment, and also preserves the valuable cutting tool. The ability to cut close to walls is outstanding. Thanks to its electric drive, joint cutting in indoor spaces is also among the special strengths of the COMPACTCUT 401 E, which is also characterized by maneuverability, durability and outstanding operator ergonomics. Whether cutting asphalt, concrete, making separation cuts, demolition work, tight construction sites or joint cutting in buildings - the powerful electric joint cutter with a 400-volt motor delivers excellent results under all conditions.

This powerful electrical drive is capable of handling up to 6.5 PS, making it the ideal choice for sawing concrete, stone, and masonry. The Coccodrillo 35 is safe to use in basements, rooms, and tight spaces, as it doesn't produce health-damaging exhaust fumes. It's easy to operate with a simple on-off switch and is electrically safe with PRCD protection. Additionally, the CARDI multi-function electronics provide soft start and overload protection, ensuring it complies with European and international regulations and standards.

Our mini cranes MRK can be used on any surface, fit into any van when folded and can be easily loaded and unloaded. Thanks to the crawler chassis, the assembly cranes can easily travel over uneven surfaces and even master extreme inclines. Thanks to the emission-free electric drive and the non-staining chains, they are also suitable for indoor use. They are operated directly or by radio remote control. Heavydrive offers you a wide range of these flexible all-rounders up to a maximum load of 10,000 kg for rent or purchase.

The ERSTER 16 is a robust, proven farm loader device with all-wheel drive in the competitive price range of commercial vehicles. A European-compliant lighting system, German road approval and a fully equipped cabin round off the whole package. A trailer hitch for car trailers is also included in the package. All models have a shovel with replaceable teeth. The basic equipment of the wheel loaders also includes a pallet fork with high-quality 120cm tines. The electric drive control on the joystick, which is so often praised by many, is also included in the basic package. 4 hydraulic control circuits are also included in the standard package. Only buy wheel loaders from specialists. For your use on site. Rear view camera - heating - ventilation - comfort seat adjustable to the driver's weight - adjustable steering wheel, these are just a few of the equipment features of the construction machine.

ASM model is made of cast iron construction. ASM machines are combining the user friendly features, quality and best prices as an economical model. ASM - 3 Rolls Asymetical Plate Roll Machine Standard Details Body is made of cast iron construction Central rollers powered with electric motor, gearbox and gear drive Cone bending device Self brake main motor Upper roll is opanable by side Lower roll and back roll are with hand wheels up & down adjustable. Separate eletric control panel with foot pedal Suitable for CE, ISO 9001-2008, TSEK and TURQUM certificates ASM - 3 Rolls Asymetical Plate Roll Machine Optional Features Induction hardened rolls. Back roll with motor. Digital display.

MD-500E PRO - the versatile, silent and environmentally friendly electric dumper! As a perfect helper for all transport work, the MD-500E PRO provides valuable services in many industries. Lumag MD500EPRO electric wheel dumper Equipment features: - The MD-500E PRO easily transports loads of up to 500 kg and does so with absolute silence thanks to its all-electric drive! - An extremely narrow design and compact dimensions bring the MD-500E PRO even through narrow gates and paths safely to the site. - The 48V charger and the battery set (4 x 12 V, 32 Ah) are included in delivery! - Two gas springs make it much easier to dump heavy loads! - The electric dumper can also be used indoors! - Incl. LED lighting!

The Böcker mini crane is the ideal tool for moving large-format construction elements. Safe and error-free working as well as a significant acceleration of the working process are guaranteed by all mini crane models. - Hook height 4.5 m, telescopic to 6.0 m - Completely hot-dip galvanized (frame, tower, jib) - Trolley with electric motor drive - Wheel breakage protection and foot protection as standard equipment - Spindle lifting gear for electric motor-driven raising and lowering of mast and boom - Hoist with quick and fine lift, 8 m chain and load hook - Water-repellent protective hood - Optional rotary and cross travel drives, each with two speeds, rotary drive can be easily disengaged - One-tong system guarantees effective working Smooth-running rotating device ensures easy working - Low-backlash locking of the tower - Concrete ballast weight 650 kg / 960 kg with practical transport lug - Due to inclined position, up to 5 mini cranes can be loaded on one truck

SPECIFICATION PRODUCTIVITY1500 pouches/hour FILLING RANGE200-1000 ml POWER SUPPLY, MAX220 V, 50 Hz COMPRESSED AIR PRESSURE5 kg/cm2 AIR CONSUMPTION~ 0.2 m3/hour @4 bar PACKAGING MATERIAL1/2/3-layered polyethylene film with black internal layer; thickness – 70-90 microns, width – 320 mm FILLING ACCURACY± 0,5-1% [depending upon bulk density of product, constant product availability in the product tank (for liquids), proper maintenance] OVERALL DIMENSIONS , (WxLxH)670 x 790 x 2570 mm WEIGHT, NET~ 450 kg MACHINE CONSTRUCTION All components are mounted on a single frame. All parts in contact with the product are made from stainless steel AISI 304 . The exterior panels are made of stainless steel AISI 202. Mechanical drive. Protective and hygienic front door. Basic Elements: Film unwinding is provided by rubberized shaft with electric drive and operated by inductive sensors Ultra-violet lamp for film sterilization Liquid Filler CIP connector

Motor: JCB / Kohler 74 HP 2500 cm3 4 Cylinders Transmission varispeed : 2 gears , 30 Km/h Wide: 1.9 m 2.5 T / 6 M Additionnal hydr function Qfit hydr ALimites sleep differential Air seat Worklights: 2 Front + 2 rear + 2 boom Electrical switch for 4 wheels drive Tyres : 12.5/80-18