Edges - Import export

iglidur® knife edge rollers Precise and lubricant-free deflection igus® has developed its own knife-edge conveyor pulleys to implement conveyor belt deflection for conveyor technology applications. The first standard product range has three iglidur® materials available: the universal iglidur® P210 and the FDA compliant iglidur® A180 (up to 90°C) and iglidur® A350 (up to 180°C). The iglidur® solution is characterized by tight deflection radii and low essential driving power. Complete freedom from the lubricant of the belt deflection Low driving power Tight deflection radii Long service life of the belt Cost-effective High holding times Application areas: Packaging, material handling, automation, food processing. Brochure (PDF) Shaft diameter d1 [mm]: Knife-edge conveyor pulley application example Precise and lubricant-free deflection igus® has developed its own knife-edge conveyor pulleys to implement conveyor belt deflection for conveyor technology applications. The first standard product range has three iglidur® materials available: the universal iglidur® P210 and the FDA compliant iglidur® A180 (up to 90°C) and iglidur® A350 (up to 180°C). The iglidur® solution is characterized by tight deflection radii and low essential driving power. Complete freedom from the lubricant of the belt deflection Low driving power Tight deflection radii Long service life of the belt Cost-effective High holding times Application areas: Packaging, material handling, automation, food processing. Brochure (PDF) Shaft diameter d1 [mm]: Soft stainless steel Hard stainless steel

90x150x5mm. 43g, 60 graphic pages. Lies flat and rips neatly mix of deskpads and color pop items handmade binding. Graphic pattern notebook pages Papier: post-consumer recycled paper Couverture: Soft Cover Reliure: Handmade Pasting Binding

64 x 72 x 3mm, 14g, set of 2 sticky note blocks, 30 sheets for each Graphic pattern notebook pages Papier: post-consumer recycled paper Reliure: Sticky Memo Binding

90x150x5mm. 43g, 60 graphic pages. Lies flat and rips neatly mix of deskpads and color pop items handmade binding. Graphic pattern notebook pages Papier: post-consumer recycled paper Couverture: Soft Cover Reliure: Handmade Pasting Binding

90x150x5mm. 43g, 60 graphic pages. Lies flat and rips neatly mix of deskpads and color pop items handmade binding. Graphic pattern notebook pages Papier: post-consumer recycled paper Couverture: Soft Cover Reliure: Handmade Pasting Binding

75x105x5mm. 26g, 60 graphic pages. Lies flat and rips neatly mix of deskpads and color pop items handmade binding. Graphic pattern notebook pages Papier: post-consumer recycled paper Couverture: Soft Cover Reliure: Handmade Pasting Binding

75x105x5mm. 26g, 60 graphic pages. Lies flat and rips neatly mix of deskpads and color pop items handmade binding. Graphic pattern notebook pages Papier: post-consumer recycled paper Couverture: Soft Cover Reliure: Handmade Pasting Binding

75x105x5mm. 26g, 60 graphic pages. Lies flat and rips neatly mix of deskpads and color pop items handmade binding. Graphic pattern notebook pages Papier: post-consumer recycled paper Couverture: Soft Cover Reliure: Handmade Pasting Binding

The functioning principle make the wedge clamps ideal for series clamping. The wedge form can exert high clamping forces. These wedge clamps can be mounted in grid holes or T-slots. Tightening the socket screw moves the wedge down and the jaws out pressing the workpieces against the fixtures fixed stops. The wedge has a slightly elongated hole allowing for movement to compensate for tolerances. Spread width: M8 = ±0.5 mm M10 = ±1.0 mm M12 = ±1.0 mm M16 = ±1.5 mm Drawing reference: D) DIN 6912 cap screw 1) Jaw face smooth 2) Jaw face serrated 3) Wedge clamps 4) Workpiece 5) Fixed stop

Fasten the floating clamp to the fixture with the M12 screw. Adjust the height stop and the swivel range using the blue sleeve and lock with the 3x2.5 mm grub screws. When setting the height leave generous clearance above. For safe operation the M12 tapped hole must always be closed. For specific clamping applications the standard jaws can be altered or replaced. Form B: Fasten the floating clamp with M6 fastening holes to a fixture. Adjust the height stop and pivot range using the blue adjusting sleeve and clamp with grub screws (4x AF 2.5). When setting the height limit, allow ample play at the top. For specific clamping situations, the standard jaw plates can be modified or replaced.

Housing and arm carbon steel. Jaw tool steel. Version: Housing, black oxidised. Arm and jaw tempered and black oxidised.

Tightening the ball-end thrust screw moves the jaw plates forwards. The workpiece is pushed against the fixed stop and simultaneously forced down onto the seating face. The seating face for the workpiece can be mounted directly on the machine table.

We recommend using a lubricating paste to reduce wear to the adjustment screw. Risers are available to increase the height of the power clamp. Supplied with clamping element, support element, DIN 508 slot key and grade 12.9 bolt. Application: The height of the clamping arm can be infinitely adjusted using the adjustment screw and the workpiece can then be clamped. Advantages: Very high retaining forces of 22–49 kN. Low height. Simple element assembly. Enables very fast, simple clamping. Infinitely adjustable height and length. Use in 12-28 mm T-slots or M10, M12, M16, M20 grid systems. Thrust pad available in smooth and serrated versions.

Edge protectors made of solid cardboard prevent the load from slipping, absorb shocks and prevent the strapping from cutting in.

U-Edge New The U-EDGE is an adaptable edge support that can be used with all ranges of Buzon® pedestals. Due to its design it creates a quick and easy solution to complete the installation at the edge of a terrace. It can be used with any size of spacer tab and all shapes of paving. The U-Edge is an accessory allowing installation of small cuts of paving (from 2 cm upwards) around the perimeter. The small cuts are supported by the U-Edge, which can be screwed in place on the head of the pedestal providing a solid solution. Advantages: →The U-Edge creates a space between the paving slab and wall keeping an even gap and enabling water flow which protects the terrace in the case of heavy rainfall, snow etc. → With its flexible tile retainers, the U-Edge can be installed on terraces of any shape: angular, curved etc. which makes installation easier and more efficient. →It is also possible to remove the tile retainers to adapt the U-Edge to work with all types of terrace layout.

These sealing profiles have a double function, namely finishing edges and closing gaps. The profiles usually consist of PVC with a very flexible moss rubber bulb, but profiles in EPDM and silicone are also possible.

These sealing profiles have a double function. They are used to finish edges and also to seal gaps. The moss rubber flap is flexible and specially manufactured to close doors and hatches.

Edge profiles are suitable for finishing sharp edges or edges. They can also ensure a good seal by, for example, a bead or flap on the top or side. A firm clamping can be obtained due to an internal thin plastic or metal insert and the shape of the edge profile. No glue required due to the clamping effect Insertion in metal, plastic or stainless steel possible Perfect sealing or finishing of edges, doors, cabinets or machines

These sealing profiles are used to finish sharp edges and also to seal gaps. The profiles usually consist of PVC with a bulb of moss rubber, but profiles in EPDM and silicone are also possible.

Professional hedge shears with wavy blades. Telescopic aluminum handles. Blade covered in anti-rust Teflon. Non-slip bi-material handle. Length from 680mm to 865mm. Packed in soft plastic with hanging eyelet.

Adhesive-based equipment The adhesive-based edge folding process differs depending on which adhesive is used. Some adhesives need to be activated and others do not.

Adhesive-free equipment Bonding with the substrate component is carried out without adhesive. These processes are particularly useful for back-injected or back-pressed components, where the decorative material needs to cover component edges.