Dc motor - Import export

The new direct-current motors with worm gear enable quiet and economically efficient operation with drylin® lead screw units. The worm wheel has a spline to which the drive pin of the linear unit is connected. As a result, a motor flange and coupling are unnecessary and, this taken in conjunction with the motor adapter angled by 90°, the structure of the linear module is very compact. Thanks to the integrated magnetic rotary encoder (2-channel hall), the new DC motors are suitable for positioning. - Space-saving and compact design - Easy to fit - Quiet operation - Rotary position encoder included - Suitable for: SLW-BB, SAW, ZLW

dryve motor control - connect & control... Operate DC motors wear-free in left/right rotation - very easy with the new control for drylin® E drive systems from igus®. drylin® D5 for DC motors -Ready for immediate use. No parameterization or programming necessary - Left/right run via digital input - Velocities & accelerations via external PWM input signal - Available with and without housing - Inexpensive - Free pattern programs

ZLN miniature toothed belt axis based on the low-profile guide system drylin® N. System width 40mm, installation height 28mm. Ready-to-install system with stepper motors or BLDC/DC motors. Configure drylin SHT linear modules individually here: https://igus.eu/ddx

dryve motor control system - select, click, control... Travel distances, positions, speeds, operating times - easily defined with the new igus® web-based control system for drylin® E linear systems. - No software or app installation necessary, fast commissioning - Control possible via smartphone (browser), tablet or laptop - Simple and intuitive user interface, control system set up in just a few minutes - Compatible with numerous industrial controllers (e.g. Siemens S7/Beckhoff) - For DC, EC and stepper motors - Cost-effective

Category Hydraulic systems, valves and components / Power packs / Components for power packs / Motors DC Product number supplier 46003503

Gear motor NIDEC 404.682 for Sommer hinged gate operator TWIST 200, SWF 404682 Rated voltage: 22 - 24 V DC Idling speed: 40 rpm Rated torque: 4 Nm Gearing:hollow shaft KRC profile (W224) type: GMPD

With interuptor limit, clamping length 54mm and drive shaft guide 10 mm toothed cone and M8 Security for threads, 55mm center distance of axes Wiper motor without switch, with parking position Wiping angle: 90 ° Mounting arm wiper: cone M8 Engine mounting: M14x1mm Support: 57mm cone M8 Shaft length: 94mm Clamping length: 54mm max. Wiper arm / wiper blade: 650 mm

Original SWF 404854 gear motor for Hörmann SupraMatic E, SupraMatic P, SupraMatic, ProMatic, ProMaticP, EcoMatic, EcoStar and RotaMatic. Does not fit SupraMatic H ! 2 - wire (green and brown) connecting cable is added, with 3 holes tapped PN = 54 W, IN = 6,0A, 24 V DC, rpm = 65 without load 1-channel Hall sensor type: DCK31 (W277)

Rated voltage: 24 V DC Idling speed: 78 rpm Rated torque: 8 Nm Gearing: left side, bolt hole circle 72 mm, hole centre distance 62 mm Shaft diameter: 10 mm Shaft length: 43 mm Shaft round with groove (W278) Type: SWMV

SWF gear motor 404.319 Rated voltage: 24 V DC Idling speed: 70 rpm Rated torque: 3.3 Nm Gearing: right side, bolt hole circle 50.8 mm, hole centre distance 43.5 mm Shaft diameter: 10 mm Shaft length: 24 mm Round slotted shaft (W199) Type: SWMP

SWF gear motor 404.312 Operating voltage: 24 V DC Idle speed: 228 U / min Rated torque: 2 Nm Starting torque 35 Nm Gearing: right side, bolt hole circle 72 mm, hole centre distance 62 mm Shaft diameter: 10 mm, shaft attachment piece 12 mm Shaft length: 31 mm Round grooved shaft with interior thread M4 (W128) Type: SW2K

SWF Valeo gear motor 402.781 Rated voltage: 24 V DC Idling speed: 55 rpm Rated torque: 3 Nm Gearing: spur gear Shaft diameter: 6 mm Shaft length: 22 mm Round shaft flattened on one side (W73) Motortyp: GMAG

SWF gear motor 403.280 Rated voltage: 24 V DC Idling speed: 52 rpm Rated torque: 2 Nm Gearing: right side, bolt hole circle 84 mm Shaft diameter: 8 mm Shaft length: 22.5 mm Round shaft flattened on one side (W45) Type: SWMP No interference suppression, SWF403.280 with terminals for connector

Gear motor for Einhell Garage door drives 24 V DC is the same motor as 210251006 GT 52 GTA 150 GTA 360 TA 50 TAF 311 TAF 321 TAF 351 TAF 362 TAF 2000 VL 500 VTA 702 K VTA 702 Z

PERFORMANCE/BATTERIES: Lifting motor 2.2 KW Traction motor 0.75 KW Travel speed with/without loads 4.1/5.6 km/h Lifting speed with/without loads 81/121 mm/s Descent speed with/without loads 103/105 mm/s Permissible slope with/without loads 3/7 % Battery 2x12v 80Ah Autonomy 2/3 hours.