Column - Import export

Activated in a few seconds on site Very robust compact construction •Invertable fork with adjustable width Two Ø 200 mm wheels for easy transport on site • Base equipped with 2 stabilizing arms • Feet with adjustable height wheels Lifting cable anti-torsion in very high resistance steel Level for perfect control of the position of the feet Lifting winch with automatic brake • Steel pulleys on bearings

for raising the height of glazing on a veranda roof. Portable device for immediate action on site.

"The DW 380 manual plate lifter reduces labor costs It allows a single person to install plasterboard on the ceiling or under the roof. Thanks to its unique construction (patent pending), it can be transported on site like a suitcase. Activated on site in 30 seconds"

Universal portable manual lift suitable for all vertical lifting for safe work thanks to its special anti-twist mast and its offset winch with automatic brake.

Versatile portable load lifter for any construction site or workshop. For easy transport in the vehicle folds in seconds

Folding hand truck for use in any vehicle, workshop or office. This versatile elevator or vertical load lifter will always have its place to move and translate any load effortlessly.

Portable electric plate lifter for raising any plasterboard or placo up to a height of 5.2 m. Avoids physical fatigue and is 10 times faster than a manual plate lifter.

BD 400 is the universal portable electric lift for raising heavy loads safely. Thanks to its unique construction, lifting loads as close as possible to a wall is also possible It is the lifting device suitable for all construction sites or workshops Thanks to its very small footprint and low weight, it can be easily transported for immediate use. Mast with aluminum anti-twist rails Only 2 elements: the elevator and the lifting accessory Immediate use on site, activated in a few seconds without tools 230 V single-phase electric motor with speed variator Possible use in the event of a power outage using the crank provided (or battery-powered screwdriver) Integrated torque limiter, cuts off lifting in case of overload Easy transport on site thanks to transport wheels Stabilizer with adjustable length wheels By design, the feet are placed in front of or behind the mast (for facade work)

CA 400 P - Universal portable electric lift suitable for any vertical lifting for safe work. For the installation of cassette, air conditioning, duct or other load Load capacity 150 kg - Lift height 4 m Lightweight portable device Immediate use on site Put into action without any tools Only 2 elements: the mast and the plate With 4 individually adjustable feet Use on stairs or sloping ground Special foot kinematics for working close to the wall (UPTER system) 230 V mono electric motor Variable speed at will Integrated torque limiter Manual use possible in the event of a power failure using the crank provided

CM 520 - Portable electric lift, load capacity: 140 kg up to 3 m 130 kg at 4 m 90 kg at 4.9 m Low weight portable device - only 38 kg Immediate use on site Put into action without any tools Only 2 elements: the mast and the plate With 4 individually adjustable feet Use on stairs or sloping ground Special foot kinematics for working close to the wall (UPTER system) 230 V single-phase electric motor Variable speed at will Integrated torque limiter Manual use possible in the event of a power outage using the supplied crank or screwdriver on batteries

"CM 340 universal portable electric lift suitable for any vertical lifting for safe work. For the installation of cassette, air conditioning, duct, awning, pergolas or other load Lightweight portable device Immediate use on site Put into action without any tools Only 2 elements: the mast and the plate With 4 individually adjustable feet Use on stairs or sloping ground Special foot kinematics for working close to the wall (UPTER system) 230 V mono electric motor Variable speed at will Integrated torque limiter Manual use possible in the event of a power failure using the crank provided.

An advertising pillar is a classic and iconic advertising medium in public spaces that has characterised the cityscape since the 19th century. The advertising pillar shown here is characterised by its timeless design with a diameter of 1240 mm and an impressive height of 3496 mm. The characteristic appearance is characterised by the round shape, the decorative base and the final cover with a striking ball. These elements not only give the column stability, but also an appealing look for your advertising pillar that blends harmoniously into various urban environments.

for transporting, lifting and rotating glass panels with virtually no physical effort. Put into action in just a few seconds on site.

Aluminium. Note: The lifting column is an electrically driven system with fully integrated technology, which is maintenance-free and operated according to the plug & work principle. With a maximum speed of 8 mm/s, up to two lifting columns can be driven synchronously between 355 mm and 500 mm using the control (85300-10-90). Optionally, two controls can be connected together with a connection cable (85300-10-91X1000) so that four lifting columns can be driven synchronously. These lifting columns are suitable for thrust and traction loads. At least one control (85300-10-90) and one hand switch (85300-15-1) are required for commissioning the lifting columns. The mounting plate (85300-930040) enables the lifting column to be easily installed into the customer's application.

Crank black powder coated. Thermoplastic black. Steel parts black oxidised. Note: Similar to DIN 469.

The hub cover is supplied loose. The handwheels can be secured using a transverse pin or by parallel key connection together with a DIN 6912 socket head screw and a DIN 7349 washer. Versions with transverse bore are secured using the ISO 4026 (DIN 913) grub screw. For assembly example, see 06262.

Wide flange columns ( HD Sections) Wide Flange Bearing Piles B ritish Universal Beams acc to BS4 Part 1 ( UB Sections) B ritish Universal Coloumns acc to BS4 Part 1 ( UC Sections) Channels with Parallel Flanges , acc to NF A 45-255 Americam Standart Channels acc to ASTM A6 (C Sections) Japanese H – Sections acc to JIS G 3192

Formwork for piers and bridge girders plays a crucial role in the construction industry, especially in the realisation of bridges and other large concrete structures. With customised solutions, complex architectural designs can be realised while ensuring structural integrity and safety. Customised formwork systems for bridge piers offer numerous advantages for construction professionals. Not only do they allow precise customisation to the specific requirements of each project, but they also enable efficient and time-saving construction.

Mounting plate steel/plastic. Monitor bracket aluminium. Bearing washers and sleeves plastic. Mounting flange aluminium. Mounting adapter aluminium. Screws steel. Version: Mounting plate painted. Monitor bracket painted. Mounting flange painted. Mounting adapter painted. Screws electro zinc-plated

High-strength material mix of thermoplastic/aluminium. Version: Black/bright. Note: We offer three different basic brackets for industrial monitors and touch panels: Compact: space-saving, with a swivel range of 60°. For loads up to 10 kg (static). With universal mounting plate. The basic bracket is suitable for mounting on tubes size Ø30 mm or 30x30 mm. By using the optional reducer sleeve 29040 they can also be mounted on other sized tubes (Ø20 and Ø25 mm or 20x20 and 25x25 mm). With rotary flange: vibration-resistant, lockable monitor bracket with an angle adjustment of 90° in 15° increments. For monitors / control units up to 25 kg (static). With universal mounting plate. The basic bracket is suitable for mounting on tubes size Ø30 mm. By using the optional reducer sleeve 29042 they can also be mounted on other sized tubes (Ø20 and Ø25 mm or 20x20 mm).

Steering column for wheel loader FERRUM DM416 x4. Will be delivered like shown. Also suitable for models FERRUM DM732 x4 FERRUM DM625 x4 FERRUM DM522 x4 FERRUM DM312 x4

Steering column for wheel loader FERRUM DM308 x4 . Will be delivered like shown.

Elliptical columns made of corrugated board are ideal for promotional merchandising campaigns in stores, at exhibitions, events, indoors and outdoors, as information, presentation space or retail display. The DROP '’N POP-display comprises few interlocking corrugated board components with a clever mechanism: They automatically assume shape when they are opened up.