Collar - Import export

Goods cannot slip out, Prevent the collars from lifting

Two-piece shaft collars surround the shaft with a uniformly distributed clamping force. This leads to a dimensionally precise fit and very high retaining forces without damaging the shaft. The shaft tolerance should lie within h11. Two-piece shaft collars can be quickly and easily mounted or removed without dismantling other components.

NECK/BACK BONE Pork Shoulder aka Pork Butt Picnic Ham Front Hock Pork Loin Pork Chops Baby Back Ribs Pork Belly Spareribs Sirloin Rear Leg Hock Frozen Pork Half Carcass Frozen Pork Leg Bone-in, Skin on Frozen Pork Leg Bone-in Skinless Frozen Pork Leg Boneless Skinless Frozen Pork Loin Bone-in Skinless Frozen Pork Loin Boneless Skinless Frozen Pork Shoulder Boneless, Skinless Frozen Pork Collar Boneless, Skinless Frozen Pork Loin Boneless, Skinless Frozen Pork Tenderloin Frozen Pork Belly Sheet Ribbed, Skin on Frozen Pork Spareribs Frozen Pork Back Fat Frozen Pork Cutting Fat Frozen Pork Tenderloin Frozen Pork Hind Feet Frozen Pork Ear Flap Frozen Pork Kidneys Frozen Pork Jowl Frozen Pork Heart Frozen Pork Liver Frozen Pork Neck Bones Frozen Pork Skin Frozen Pork Tongue Frozen Pork Throat Frozen Pork Snout Frozen Pork leg Frozen Pork Front Feet Frozen Pork Hind. Feet Frozen Pork Tails Frozen Pork Ear Flaps

Pork Feet Pork Cuts Pork Carcass Pork Ears Pork Tail all pork parts frozen pork feet / frozen pork offal/ frozen pork intestines/ frozen pork carcass

Optimal storage of goods on Euro pallets Stable packaging unit for transport Simple stacking of the frames Secure hold Quality coniferous wood suitable for export

Protect your stored goods, All-round protection against loss and damage

Safe stacking of pallets with pallet collars Enormous space and freight saving Creates order and overview High-quality PPC material Frequently reusable

Sturdy and individual subdivision Optimum use of space on a pallet Transport damages are avoided Fixing with self-locking eccentric fittings Robust quality wood

Easy pluggable in system Flexible partitioning Each provided with notches Number of compartments can be changed at any time Sturdy plywood partition elements

Clamping joints are used to clamp round cross sections (bars, tubes, etc.) and are infinitely adjustable. The simple design together with the adjustable clamping lever permits rapid clamping.

Clamping levers with safety function prevent changes in the locking point through accidental opening or closing. In the default position, the lever can be freely rotated and has no connection to the clamping point. The grip lever only engages when pushed down and the clamp can the loosened or tightened. A spring sets the lever automatically into the default position when released.

By using clamping levers with integrated clamping force intensifier, the clamping force can be increased by up to 75% compared to standard clamping levers. Furthermore, this product can also be used by persons with limited hand strength (e.g. in rehabilitation) to achieve comparable clamping forces with less effort. Less effort is also needed to loosen the clamping lever. The increase in clamping force is achieved by the integral needle roller thrust bearing, which generates very low surface friction on a rigid contact surface during clamping. The hardened thrust washers are designed for high clamping forces and the bearing with its high load rating guarantees a long service life. The clamped component is permanently protected by the large, stationary contact surface. A washer is no longer required. Due to the modular construction many special designs are available.

Enter the desired lever colour here. The standard colours are: Black grey clamping lever, traffic red push button. Orange clamping lever, black grey push button. Traffic red clamping lever, black grey push button. Where L ≥ 60 mm the thread length is 60 mm. On request: Other threads, screw lengths and special versions. Dimension “H1” available in other lengths at extra charge. Drawing reference: 1) flat point DIN 78

Other threads, screw lengths and special versions. Dimensions “H1” and “A” available in other lengths at extra charge.

Latches with draw bail for securing and locking hatches, container lids, machine cladding etc. By exceeding the dead centre they resist vibration. The locking force is applied by drawing on the bail. The latches can be screwed down or riveted. We recommend using countersunk screws for fastening the components. Order catch plates separately.

Steel parts electro zinc-plated. Hinge pins tempered. Plastic handle oil-resistant. Note: See 05200 – 05280 for accessories.

The functioning principle make the wedge clamps ideal for series clamping. The wedge form can exert high clamping forces. These wedge clamps can be mounted in grid holes or T-slots. Tightening the socket screw moves the wedge down and the jaws out pressing the workpieces against the fixtures fixed stops. The wedge has a slightly elongated hole allowing for movement to compensate for tolerances. Spread width: M8 = ±0.5 mm M10 = ±1.0 mm M12 = ±1.0 mm M16 = ±1.5 mm Drawing reference: D) DIN 6912 cap screw 1) Jaw face smooth 2) Jaw face serrated 3) Wedge clamps 4) Workpiece 5) Fixed stop

The pneumatic hold-down clamp is suitable for clamping workpieces from above. This clamp is operated with standard pressure compressed air. The large swivel angle of the clamping arm makes it easy to insert and remove the workpieces without any obstructions, guaranteeing optimum accessibility to the workpiece. The block design of the housing offers universal fastening possibilities, which means that the clamp can be optimally adapted to the workpiece being clamped. Self-aligning pads with a smooth or serrated faces can be fitted in the clamping arm, enabling rough or machined workpieces to be clamped. These pneumatic clamps can be placed in multiple positions on the workpiece and operated in any particular order. They can be controlled manually or automatically. As these clamps are pneumatically actuated, they relieve the operator, particularly where frequent clamping processes are carried out.

Housing and arm carbon steel. Jaw tool steel. Version: Housing, black oxidised. Arm and jaw tempered and black oxidised.

1. Screw the locking screw into the collar bush, fixture clamp and clamping unit and screw onto the baseplate. 2. The workpiece is clamped by tightening the fixture clamp with a spanner. Advantages: Compact design Quick and easy clamping of components Pull-down effect Drawing reference: 1) Locking screw 2) Collar bush 3) Fixture clamp 4) Clamping unit

Body carbon steel, black oxidised. Jaw carbon steel, tempered, black oxidised. Note: The adjustable toe clamp is used together with the rack plate CL.

Tightening the ball-end thrust screw moves the jaw plates forwards. The workpiece is pushed against the fixed stop and simultaneously forced down onto the seating face. The seating face for the workpiece can be mounted directly on the machine table.

1. Screw the locking screw into the collar bush and fixture clamp and screw onto the baseplate. 2. The workpiece is clamped by tightening the fixture clamp with a spanner. Advantages: Compact design Quick and easy clamping of components Drawing reference: 1) Locking screw 2) Collar bush 3) Fixture clamp

We recommend using a lubricating paste to reduce wear to the adjustment screw. Risers are available to increase the height of the power clamp. Supplied with clamping element, support element, DIN 508 slot key and grade 12.9 bolt. Application: The height of the clamping arm can be infinitely adjusted using the adjustment screw and the workpiece can then be clamped. Advantages: Very high retaining forces of 22–49 kN. Low height. Simple element assembly. Enables very fast, simple clamping. Infinitely adjustable height and length. Use in 12-28 mm T-slots or M10, M12, M16, M20 grid systems. Thrust pad available in smooth and serrated versions.

Hook clamps and clamping screw carbon steel, tempered.

Tempered and black oxidised. Note: The pressed in plastic inserts offer optimal damage protection for sensitive workpiece faces.

The pneumatic swing clamp is suitable for clamping workpieces from above. The swivel and clamping function occurs pneumatically. The swivel function enables unobstructed insertion and removal of the workpiece. Optimum accessibility to the workpiece is guaranteed. The foot of the housing offers universal fastening possibilities, enabling the swing clamp to be optimally aligned with the workpiece being clamped. The swing clamps are available in left or right swivelling versions. Pneumatic swing clamps can also be placed in multiple positions on the workpiece and operated in a particular order. They can be controlled manually or automatically.

Swing clamps are used where the clamping points must be free when the workpiece is loaded or removed.

Grip black or traffic red RAL3020. Thrust washer black. Hinge pin bright. Stud and washer trivalent blue passivated or bright stainless steel. Note: Adjustable cam levers are used if the position of the lever relative to the axis of tension only permits one specific position (interference circle). The exact position of the lever is adjusted using a screwdriver on the fine thread setscrew. Plastics are subject to creeping under load (retardation), this can cause reduced clamping force. Drawing reference: 1) setscrew for fine adjustment of lever