Clamping plates - Import export

The easy operability and rapid adjustment using a scale means that the clamping jaws can be quickly and surely adapted to new workpieces The workpiece is always centred through the systematic construction of the 5-axis compact clamping system. The optimal accessibility to the workpiece allows short, standard tooling to be used. Tooling costs are significantly reduced. Positive down force by a clamping depth of >5 mm. Clamping widths of 20 mm to 320 mm are possible. Assembly: The 5-axis clamping system compact can be mounted on T-slot tables, grid systems or, using an adapter flange on conventional zero-point clamping systems. Accessory: Seating ledge 41345 Jaw plates 41320 Pendulum jaws 41325 Centre jaws 41335 Coupling for cross-clamping 41365 Order the seating ledges and jaw plates with pins separately.

Flange plate, piston and body rust-resistant, bright. Screws electro zinc-plated. Collet red or clear anodised. Note: Machinable collet system with base plate for mounting on 50mm pitch grid plates. The flange plate can be used for external or internal clamping collets. The contour of the workpiece to be clamped is machined into the collet. Free-form and asymmetrical contours can be clamped. The integrated spring package generates a clamping force of 5.8 kN. The clamping force can be raised to 43.5 kN by pneumatic post-clamping. The clamp is released by blowing compressed air onto the lower piston surface pushing the piston upwards and releasing the clamping force on the collet. Clamping travel 0.2 mm. Repeat accuracy < 0.01 mm. Accessory: Collet for external or internal clamping 03179

Interchangeable subplates are particularly suitable for quickly exchanging fixtures on zero point clamping plates. Ground on both sides, standard clamping pin gauge of 200 mm. Complete with clamping pins and handles. On request: Further gauges and special sizes.

max. size 36,50 x 52 cm age 1999 stream feeder Ryobi film dampening SuperDampener cooling unit Baldwin BasicLiner 2.0 quick plate clamping bars dry sprayer Delivery time: immediately Ref: RY220301A Please ask for price. We ship and install worldwide!

max. size 36 x 52 cm age 1988 single sheet feeder conventional dampening quick plate clamping bar dry sprayer + version numbering unit N+P shown totalizer: approx. 20 mill. impressions Delivery time: immediately from stock Ref: HE230102A Please ask for price. We ship and install worldwide!

max. size 36,50 x 52 cm age 1998 stream feeder Ryobi film dampening SuperDampener cooling unit MGE ECO quick plate clamping bars dry sprayer Delivery time: immediately Ref: RY220310A Please ask for price. We ship and install worldwide!

Housing hardened and black oxidised. Contact faces ground. Note: This positioning and clamping system is especially suitable for installation in fixtures (plates, clamping tower blocks, etc.) in all mounting positions. The modular design allows the number of and distance between the locating cylinders to be ideally adjusted to suit the clamping task. Due to the small diameters, the spacing between the locating cylinders can also be reduced. The 3 clamping balls are mechanically released through control of the locating cylinder with the "opening" connection. The 3 clamping balls move inward and the fixture can be changed quickly. For clamping, the air is taken from the "opening" connection and the "clamping" connection then receives air on the locating cylinder. The 3 clamping balls are mechanically driven outward again and the new fixture is clamped. To achieve optimal retaining force, the locating cylinder remains connected to the air.

Fasten the floating clamp to the fixture with the M12 screw. Adjust the height stop and the swivel range using the blue sleeve and lock with the 3x2.5 mm grub screws. When setting the height leave generous clearance above. For safe operation the M12 tapped hole must always be closed. For specific clamping applications the standard jaws can be altered or replaced. Form B: Fasten the floating clamp with M6 fastening holes to a fixture. Adjust the height stop and pivot range using the blue adjusting sleeve and clamp with grub screws (4x AF 2.5). When setting the height limit, allow ample play at the top. For specific clamping situations, the standard jaw plates can be modified or replaced.

clamping plate material: aluminum alloy AlMg3 size: 15 x 35 x 66 mm 1 internal thread: M8 - 6H in the middle, 2 internal threads: M6 - 6H central circle diameter: 30.20 +0.10/-0.00 all 90°to be made as 0.5mm x 45° tolerance according to ISO 2768-F grade unit weight: 57.31 g manufactured by CNC machining center Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

Cradle 0505 Other versions with different mixing ratios: 50ml side-by-side cartridges, mixing ratio 1:1 50ml side-by-side cartridges, mixing ratio 2:1 50ml side-by-side cartridges, mixing ratio 4:1 35ml side-by-side cartridges, mixing ratio 1:1 Color Turquoise / black Other colors on request Drive Rugged, professional clamping plate extrusion Extrusion rate: 5mm / pump Benefits Light weight Professional, high-quality applicator Lever made of glass fiber reinforced plastic High-quality, rugged cartridge cradle made of sheet steel Custom colors available (from 1000 units) Packaging Individually packed in PE bags 24 units per box