Chain sprocket - Import export

Polyethylene PEUHMW (ultrahigh molecular weight polyethylene). Glide rails for roller chains as defined in DIN ISO 606. These support and guide the roller chains on the return side, thus extending useful life by significantly reducing wear on the roller chains. They reduce vibrations and noise in the chain drive. These glide rails have high abrasion and wear resistance. They are maintenancefree, acidproof and have high chemical resistance. The additional C profiles are used for fastening to the system substructure and they protect the glide rails from lateral forces and torsion. Assembly The glide rails are pushed into the C profiles fastened to the system. The glide rails must be mounted so that the material is allowed to expand. A property of thermoplastic materials is that they expand or contract more than metals when there are temperature variations.

The angle bracket enables easy mounting of the clamping elements directly on the machine component. The bore D2 serves to hold the clamping element. The clamping element can be mounted on the front or rear of the bracket. The bores D3 enable the bracket to used for other applications.

Housing 1.4308 stainless steel, from size 5 1.4301. Clamping arm 1.4301 stainless steel. Buffer natural rubber. Screw stainless steel A2. Version Housing and lever arm bright. Screw ISO 4017, grade 70, bright. Note Clamping element with integrated highly elastic, shaperetaining natural rubber buffer. Together with a chain tensioner set, sprocket set or a tension pulley, the clamping element makes a readytoinstall tensioning unit suitable for tensioning chain and belt drives. Suitable for both tensioning directions. The clamping elements are maintenancefree and tearoff resistant. The clamping element is fastened to the machine component through a bore. If necessary, a heavyduty dowel pin can be inserted in the positioning notch “P” for torque support.

Tensioner Vesconite® plastic. Screw and nut steel. Version Screw ISO 4017, grade 8.8, electro zincplated. Nut ISO 4035, grade 8, electro zincplated. Note For tensioning roller chains. The chain tensioner set can be combined with all tensioning elements to form a readytoinstall chain clamp. The symmetrical design enables use on both sides. Large radii ensure very quiet running. The highquality plastic does not require any lubrication. The maximum chain speed should not exceed 1.5 m/s in continuous use.

Sprocket steel. Ball bearing chrome steel. Screw and nut steel. Version Sprocket teeth hardened to HRC 50, electro zincplated. Ball bearing with sealing discs 2ZC3. Screw ISO 4017, grade 8.8, electro zincplated. Nut ISO 4035, grade 8, electro zincplated. Note For tensioning roller chains. The sprocket set can be combined with all tensioning elements to form a readytoinstall chain clamp. The ball bearings are sealed both sides, permanently lubricated and maintenancefree. The sprocket can be moved on the screw and thus adapted to the chain track. With the duplex and triplex version, precision spacer sleeves ensure correct chain guidance. Rigid mounting without a tensioning element is also possible. Can also be used as an idler sprocket.

Sprockets with hub one side for DIN ISO 606 roller chains. The sprockets have a centre bore or are predrilled (this can vary due to production methods). For this reason, the dimension D3 max. given in the table is the maximum diameter of the bore that the sprockets are supplied with. This pilot hole/centre bore can be customised with a reamed hole, reamed hole with keyway or a tapped hole by the customer. Alternatively, bushes can be fitted by the customer to reduce the diameter.

Steel C45. Grey cast iron GG22 from 38 teeth. Sprockets with hub one side for DIN ISO 606 roller chains. The sprockets have a centre bore or are predrilled (this can vary due to production methods). For this reason, the dimension D3 max. given in the table is the maximum diameter of the bore that the sprockets are supplied with. This pilot hole/centre bore can be customised with a reamed hole, reamed hole with keyway or a tapped hole by the customer. Alternatively, bushes can be fitted by the customer to reduce the diameter.

Ready to install sprockets with hub on one side for DIN ISO 606 roller chains. Teeth are milled and inductively hardened. Keyway acc. to DIN 6885 / BS 4235. The keyway is aligned with the tooth tip. With two grub screws. One tapped hole aligned with the keyway centre, the other offset by 90°.

Packaging unit 5 metres with odd number of links. Ending with an inner link at both ends. Connecting links must be ordered separately. Note Europeantype DIN ISO 606 roller chains with curved link plates (ISO No. 06 with straight links). All chains are prestretched. Not lubricated, the chains must be lubricated depending on the application. The stainless steel roller chains offer excellent corrosion protection and good chemical resistance. They can be used in applications with water and at high temperatures. B7 = maximum value for links. Pitch = PxB1

Connecting links for DIN ISO 606 duplex roller chains. By Form E, the spring clip must be mounted with the closed end facing the direction of movement. Offset links are required to close the chain if there is an odd number of links. Using offset links reduces the power and tensile strength by 20%.

Packaging unit 5 metres with odd number of links. Ending with an inner link at both ends. Connecting links must be ordered separately. Note Europeantype roller chains acc. to DIN ISO 606 with curved link plates (ISO No. 06 with straight links). All chains are prestretched. Initial lubrication anticorrosion mineral based oil. B7 = maximum value for links. Pitch = PxB1

Sprockets with hub one side for DIN ISO 606 roller chains. The sprockets have a centre bore or are predrilled (this can vary due to production methods). For this reason, the dimension D3 max. given in the table is the maximum diameter of the bore that the sprockets are supplied with. This pilot hole/centre bore can be customised with a reamed hole, reamed hole with keyway or a tapped hole by the customer. Alternatively, bushes can be fitted by the customer to reduce the diameter.

BME BauMaschinen Ersatzteile is a Europewide operating company. Our core competence is the distribution of highquality (OEM) system solutions, accessories and spare parts for machines in the construction industry. The satisfaction of our customers is a daily driving factor for us. Our central corporate objective is to provide added value through our service to major customers, small and mediumsized enterprises as well as private individuals. The products from our assortment come from leading international manufacturers. The quality of our products is essentially characterised by their reliability and long service life. Product range • Final drives • Rubber tracks • Steel (track) chains and Chain links • Rubberized floor plates (Roadliners), Rubber pads for steel (track) chains • Sprockets • Idlers • Top rollers • Buttom rollers • Industrial tires • Chain driven undercarriages

Chain oil is a product of mineral origin containing special additives that improve the lubrication and cooling of saw chains, drive sprockets, tires and extend their use. The oil is suitable for different types of saws all year round in the temperature range from +40°C to -35°C. Chain oils can be used for different types of saws all year round, since the operating temperature range is from plus 40°C to minus 35°C. Also, chain oil protects the metal parts of the saw from the occurrence of corrosion processes, as it creates a film on their surface. Chain oil is used today for many technical devices, but mostly it is all modern gasoline and electric saws. These tools are usually equipped with an automatic lubrication system.