Results for
NORELEM FRANCE
France
Body carbon steel. Balls roller bearing steel. Diverters plastic. Standard guide carriage with recirculating ball guidance precision N not preloaded (Z0). With doublesided end seal. 4row versions with round arch profile. The profile guide rail tracks are arranged at 45° and can accept loads from all directions. High dynamic values v = 5 m/s. Applicable temperature in continuous use max. 80 °C. On request Various precision and preload classes. Drawing reference 1) ground ref. edge
Request for a quoteIGUS® GMBH
Germany
Maintenance-free, compact, quiet and cost-saving complete system - the alternative to the busbar system. For the safe guidance of energy, data, air and liquids in ONE system. - Easy to clean - No particle pollution due to abrasion - Quiet, lubrication-free, and easy to install - Operating speeds of up to 6 m/s in high-acceleration applications - Data rates up to 10 Gbit/s. Safely guides FOC and bus cables - Low space requirement
Request for a quoteNORELEM FRANCE
France
These precision slideways with roller bearings are used in machine and fixture construction, metrology, optical instruments and precision mechanics. The scale division on the micrometer dial is 0.02 mm. The stated permissible load values (F) are designed for a service life of 1 million travel cycles. The torque values apply only to centred slides. An additional centring hole is located at holes D2 and D3 on the top of the slide. Other connecting elements can be precisely mounted on the slide in combination with our centring rings 20240. F = permissible loading for dynamic and static loads. TI E/E1 = number of fastening holes E/E1/M inside. TA E/E1 = number of fastening holes E/E1/M outside. TI E4 = number of fastening holes E4/D1 inside. TA E2 = number of fastening holes E2/D1 outside.
Request for a quoteNORELEM FRANCE
France
These precise slideways are used in e.g. machine, fixture and metrology equipment construction as well as in the optical and precision engineering industries. The central set screw M1 can be replaced by a clamping lever 06460. The stated permissible load values (F) are designed for dynamic loads with a service life of 1 million travel cycles. For static loads, 10 times the table value F is permitted. The torque values apply only to centred slides. An additional centring hole is located at holes D2 and D3 on the top of the slide. Other connecting elements can be precisely mounted on the slide in combination with our centring rings 20240. TI E = number of fastening holes E/M inside. TA E = number of fastening holes E/M outside. TI E1 = number of fastening holes E1/D1 inside. TA E1 = number of fastening holes E1/D1 outside.
Request for a quoteNORELEM FRANCE
France
These precision dovetail slides find use in e.g. machine and fixture construction, metrology, optical instruments and fine mechanics. The stated permissible load rating (F) is for static loads. The torque values only apply for centred carriages. TI = number of fastening holes E1/E2/MI inside. TA = number of fastening holes E/E1/MA outside. TM = number of centring holes D1 inside. TN = number of centring holes D1 outside. Advantages An additional centring hole is located at all tapped holes. Other connecting elements can be precisely mounted on the slide in combination with our centring rings 20240. Quick and retrofit combination in the X, Y and Z axes.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
The compact, guided cylinder CC is a linear drive with a lot of power and minimal dimensions. Generously dimensioned guide rods on plain bearings or ball bearings open up a wide range of application options in variable positioning with and without sensor queries.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
The compact, guided cylinder CC is a linear drive with a lot of power and minimal dimensions. Generously dimensioned guide rods on plain bearings or ball bearings open up a wide range of application options in variable positioning with and without sensor queries.
Request for a quoteNORELEM FRANCE
France
Sliding carriage Base structure in extruded section, aluminium EN AW6060. Sliding elements Maintenance free plain bearing iglidur® J. Version Eloxalcoated E6/EV1. Black thermoplastic Note With a low rate of inerita, high accelerations and short term extreme speeds up to 30 m/s are possible. DryLin® T linear glide guides are resistant to dirt and corrosion and are adjustable, maintenancefree and quiet. Application temperature max. 80 °C. As no lubricants are used they are recommended for use in food, medical, and clean room technologies. Manual clamping was developed for simple functions. Polymer under constant pressure has a tendency to creep which causes a decrease in clamping force over time (up to 70%), which means that no safetyrelevant parts should be clamped. Suitable guide rails see 21200. Drawing reference 1) manual clamping
Request for a quoteNORELEM FRANCE
France
Bearing block and carriage aluminium alloy, anodised. Guide columns stainless steel, ground. Spindle stainless steel, rolled thread. Guide bearing maintenancefree. Position indicator plastic. Version Radial play on guide < 0.02 mm. No axial backlash. Spindle selflocking, with additional lock. Note Due to the practically playfree guides and absolutely playfree spindle, loosening or clamping of the spindle is not required during adjustments. Digital position indicators with 0.1 mm display accuracy, digits increase with right rotation. The display value of the position indicator can be adjusted by turning the carrier ring. The mounted position of the position indicator can be set in 4 positions with a screw. Within the respective sizes, the positioning stages can be easily combined using the modular principle. Drawing reference Assembly position of position indicator a) top (standard) b) right c) bottom d) left
Request for a quoteNORELEM FRANCE
France
Race body steel. Wipers plastic/felt. Longitudinal sealing lips rubber. Rollers steel 1.3505. Note Roller carriage with lifetimelubrication roller bearings and wipers which lubricate the system when moving. By simply moving the centre cam roller, the roller carriage can be adjusted so that it is free of play or has the desired pretension in the rail. High travel speeds up to 7 m/s and extremely quiet (faster and quieter than systems that use recirculating balls). The wipers are fitted with an oilsoaked felt. This felt is in constant contact with the track to ensure perfect lubrication. The felts can be recharged using an oil pump through the lubrication points on the front. On request Roller carriages with 4 or 5 rollers.
Request for a quoteCPC EUROPA GMBH
Germany
Acceleration test: The acceleration test is based on a slide-crank mechanism with a flywheel as the crank. The crank imparts high acceleration and speed to the block with finite stroke. By adjusting the rotational speed of the motor, the service life of the block can be determined at different accelerations and speeds. — Both downward-bolt and upward-bolt track rails available — High rigidity structure — Reduced lubrication requirements for environmental soundness and maintenance cost saving — Built-in lubricant storage and supply system — Dustproof design Standard seals (S) — Reinforcement plate design (Patented)
Request for a quoteCPC EUROPA GMBH
Germany
Low-noise, high-quality and high-speed ball chain (patented). The WRC ball chain (patented) design offers high contact area between the balls and the chain, which helps keep the lubricant film intact, hence allowing high-speed and low-noise operations with extended service life. — Dustproof design: The completely sealed design helps prevent dust ingress and reduce lubricant loss, which leads to extended service life. — O-type arrangement: The 4-row re-circulating balls design helps achieve equal load capacity in all four directions. — Patented design for high speed/impact: The L-shaped stainless-steel reinforcement plates with bottom latches help cover and strengthen the end caps, allowing high-speed/impact operations.
Request for a quoteCPC EUROPA GMBH
Germany
— High load, high moment function — Unique ball re-circulation design — Embedded inverse hook design — Precision MR Miniature Linear Guide series have three accuracy options: Precision(P)、High(H)、Normal(N). — Material for miniature linear guide is all made by heated treated stainless steel, including the rail, steel body of block and balls.
Request for a quoteCPC EUROPA GMBH
Germany
— High load, high moment function — Unique ball re-circulation design — Embedded inverse hook design — Precision MR Miniature Linear Guide series have three accuracy options: Precision(P)、High(H)、Normal(N). — Material for miniature linear guide is all made by heated treated stainless steel, including the rail, steel body of block and balls.
Request for a quoteSMOLKA TOR UND ANTRIEBSTECHNIK BERLIN
Germany
Drive carriage, pilot carriage 150117 for Hörmann Marantec garage door drives GTS 30, GTS 35, GTS 40, GTS 100, GTD 55, GTD 50, GTD 60 , Comfort 130, Comfort 140, Comfort 150, Comfort 160 garage door drives
Request for a quoteSMOLKA TOR UND ANTRIEBSTECHNIK BERLIN
Germany
Drive carriage complete with release lever and emergency release A and B for BGT 63, GTA 160, GTA163, TA-G 63, TA 160, TCA 500/2, BM 60; EX; II
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Results for
Carriage - Import exportNumber of results
17 ProductsCountries
Company type
Category