Results for
Italy
Commercial vehicle batteries. In the past, Commercial Vehicles were simple trucks that were used only for transport, but today this is no longer the case. They are equipped with many electronic devices to guarantee all the comforts for driving and for overnight stops. The batteries therefore have an important role, they must provide: reliable STARTING POWER in critical conditions: LOW TEMPERATURES AND LOW CHARGE; the ENERGY necessary for vehicles to support the ELECTRONIC DEVICES on board; VIBRATION RESISTANCE; RESISTANCE to DEEP DISCHARGE CYCLES. Capacity: 110ah; 120ah; 125ah; 135ah; 140ah; 18ah; 200ah; 225ah; 240ah.
Request for a quoteItaly
Car starter batteries high quality. MF batteries are designed to guarantee high starting power, rapid recharging and high resistance to corrosion and low self-discharge levels (in compliance with ideal storage conditions). Batteries capacity: 44ah; 50ah; 60ah; 63 ah; 65ah; 74ah; 80ah; 100ah; 110ah.
Request for a quoteItaly
Starter batteries car Asia The batteries in this series are designed and manufactured for all applications foreseen by Asian cars. The use of lead/calcium/tin alloy grids guarantees very low water consumption, high resistance to corrosion and low levels of self-discharge (in compliance with ideal storage conditions). Battery capacity: 35ah; 45ah;: 80ah; 100ah.
Request for a quoteItaly
Traditional starter batteries are designed to deliver just enough current to start an engine. A deep cycle battery is designed quite differently..The plates of this type of product have a denser active mass than the standard plates of car batteries. For this reason they have the ability to withstand the stresses of several discharge cycles without losing active mass or capacity. They are also designed to repeatedly deep discharge before recharging at a constant voltage. For these characteristics they are particularly suitable for golf carts, forklift-type lifters and floor cleaning.
Request for a quoteItaly
The batteries of this series are made with flat plates of high thickness and represent a valid alternative to products with tubular plates. Although they cannot guarantee the same number of cycles, these types of batteries, if managed wisely, have excellent performance and guarantee a good relationship between duration and cost. Capacity: 80ah; 100ah; 130ah; 140ah; 240ah.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Italy
Car batteries strater & stop EFB EFB batteries are suitable for small and medium-sized cars and represent the improvement of the classic flooded batteries. EFB batteries have a reduced internal resistance and guarantee twice the number of discharge cycles compared to a traditional battery. These batteries are suitable for cars equipped with start-stop systems, vehicles without start-stop system but driving in city traffic, cars without start-stop but super equipped. If an EFB battery is factory-installed in a car, it can be replaced with another EFB battery, but if a more powerful battery is desired, an AGM battery can also be installed. Batteries capacity: 68ah; 70ah; 80ah.
Request for a quoteTurkey
Specifications Nominal voltage (V) 12 20-hr rate Capacity to 10.5V at 20°C (Ah) 12 10-hr rate Capacity to 10.8V at 20°C (Ah) 11.1 Dimensions Length (mm) 151 (±1) Width (mm) 98 (±1) Height over terminals (mm) 97.5 (±2) Mass (kg) 4.05 Terminal Type FASTON - Quickfit / release (JST where stated) 6.35 Operating Temperature Range Storage (in fully charged condition) -20°C to +60°C Charge -15°C to +50°C Discharge -20°C to +60°C
Turkey
Type Designation 4103 Designation IEC LR03 System Zn-MnO2 (Alkaline) Shelf Life (Coding)* 5 years Nominal Voltage [V] 1.5 Typical Capacity C [mAh] 1100 (discharge with high-resistance) Permissible Temperature Range -10 °C ... 50 °C Weight, approx. [g] 10 Volume [ccm] 3.5
Turkey
Made in Belgium Alkaline Foil 1.5V Potassium Hydroxide 11.0gr IEC 60086-1, IEC 60086-2 IEC 60086-5 non dangerous goods reglation EU directive 2006/66/EC Nordic Ecolabel
Turkey
Brand : Tadiran Nominal voltage 3.6 V Nominal capacity 2.4 Ah Nominal current 2 mA Max. continuous discharge current 20 mA Anode surface area 14 cm2 Lithium content 0.65 g Weight 18 g Volume 8 cm3 Temperature range −55°C ... +85°C Performance Data (Typical values for batteries stored at +25°C for one year) WARNING: Fire, explosion, and severe burn hazard. Do not recharge, disassemble, heat above 100 °C, incinerate, or expose contents to water.
Turkey
Standard Charge 220 mA(0.1C) Ambient temperature of 20±5℃, Relative Humidity: 65±20% 16 hrs Standard Discharge 440 mA (0.2C) Standard charge, the final voltage is 1.0V Rapid Charge 1100mA(0.5C) Ambient temperature of 20±5℃, Relative Humidity: 65±20% Rapid Discharge 1100mA(0.5C) Standard charge, the final voltage is 1.0V High rate discharge 22 A(10C) Rapid discharge, the final voltage is 0.8V Trickle Charge 44~110 mA (0.02C~0.05C) Ta = -10~45 ℃ Nominal Voltage 1.2 V Open Circuit Voltage ≥ 1.25V Within 1 hr after standard charge Nominal Capacity 2200 mAh Minimum Capacity ≥2200 mAh(0.2C) Standard charge and Standard discharge ≥1980 mAh(0.5C) Standard charge and Rapid discharge Internal Impedance ≤15mΩ Within 1 hr after standard charge Charge-retention Rate Charge retention rate ≥Nominal capacity 60%(1320mAh) Storage a period of 28 days after standard charge, then Standard discharge (0.2C) to 1.0V Cycles Test ≥ 500 Cycles IEC61951-2:2003
United Kingdom
The Cadex C7x00 Series battery analyzers offer a platform that fulfills virtually all battery testing and conditioning needs. With features such as QuickSort® that checks lithium-ion batteries in 30 seconds, and Boost that revives dead packs, the C7x00 truly masters battery testing. Slide a battery into one of our 1,500 custom Battery Adapters, or use a Universal Adapter and you will discover why the C7x00 has become the world's leading battery analyzer.
Request for a quoteResults for
Accumulators batteries - Import exportNumber of results
14 ProductsCountries
Company type